hama DR1560CBT Digital Radio User Guide

: June 12, 2024
: Hama

hama DR1560CBT Digital Radio

Technical Data

Connectivity

Bluetooth	Receiver (RX): V5.0, class 2, A2DP, AVRCP

USB
(FAT32 File System)| Charge: 5V / 1A Playback: :MP3

Audio Connectors

Inputs	AUX In 3.5mm
Outputs	Headphone 3.5mm

Sources

CD (Drawer Type)| √|

–

---|---|---
DAB/DAB+
(174.928 – 239.2 MHz)| √|

**** 30

FM
(87.5 – 108 MHz)| √|

**** 30

Further information and features are available on www.hama.com -> 00054254

Product Overview

Controls and Displays

A: Front

1

| [PRESET 1] button
13|

2

| [PRESET 2] button
14| | [PRESET] button
15| | [Play/Pause] button
16| | [Forward] button
17| | [Back] button
B: Rear

1| | Antenna

Note
** Turning the controller allows you to change the volume or navigate through the menu structure. Pressing this rotary controller puts the device in standby mode (volume control) or confirms a selection (navigation control).

! Important information – Quick-reference guide:

This quick-reference guide contains the most important basic information, such as safety instructions and the steps necessary to operate the product.
To help protect the environment and conserve valuable raw materials, Hama does not issue a printed manual and instead makes this available exclusively as a PDF download.
The full text of the manual is available at the following internet address: www.hama.com -> 00054254 -> Downloads
Save the manual on your computer for reference and print it out if possible.

Explanation Of Warning Symbols And Notes

Risk of electric shock
This symbol indicates a risk of electric shock from touching uninsulated product parts that may carry hazardous voltage.

Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note
This symbol is used to indicate additional information or important notes.

Package Contents

DR1560CBT Digital Radio with CD
These operating instructions

Safety Instructions

The product is intended for private, non-commercial use only.
Do not use the product in areas in which electronic products are not permitted.
Protect the product from dirt, moisture and overheating and use it in dry rooms only.
As with all electrical products, this device should be kept out of the reach of children.
Do not drop the product and do not expose it to any major shocks.
Do not operate the product outside the power limits given in the specifications.
Keep the packaging material out of the reach of children due to the risk of suffocation.
Dispose of packaging material immediately in accordance with the locally applicable regulations.
Do not modify the device in any way. Doing so voids the warranty.
Use the product only for the intended purpose.
Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
Do not use the product in a damp environment and avoid splashing water.
Only use the article under moderate climatic conditions.
The product is intended only for use inside buildings.
The product must only be operated on a supply network as described on the type plate.
Route all cables so there is no risk of tripping.
Do not bend or crush the cable.
Always pull directly on the plug when disconnecting the cable, never on the cable itself.

Warning – laser

Do not look directly at the laser beam! Close your eyes and turn your head away if your eyes meet the laser beam.
Do not look directly at the laser beam using optical instruments!
This product contains a class 1 laser for consumers compliant with EN50689:2021.

Risk of electric shock

Do not open the device or continue to operate it if it becomes damaged.
Do not use the product if the AC adapter, the adapter cable or the mains cable are damaged.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.

Warning

High sound pressure level!
There is a risk of hearing damage.
To prevent hearing loss, avoid listening at high volume levels for long periods.
Always keep the volume at a reasonable level. Loud volumes, even over short periods, can cause hearing loss.
Using this product limits your perception of ambient noise. For this reason, do not operate any vehicles or machines while using this product.

Commissioning

Note – optimising reception

Please note: Always pull the antenna out completely. We recommend you adjust the antenna vertically to ensure optimal reception.

General notes on use

Switch On / Off / Standby

Press [POWER/VOLUME/ENTER/NAVIGATE] (5) to switch on the radio.
Press and hold [POWER/VOLUME/ENTER/NAVIGATE] (5) for 3 seconds to switch the radio off (standby).
To completely switch off the device, disconnect it from the power supply.

Navigation and control

After pressing a shortcut button, navigate through the menu items using.
Select the individual menu items by turning [POWER/ VOLUME/ENTER/NAVIGATE] (5).
Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (5).

Volume adjustment

Turn the volume up (right) or down (left) by turning [POWER/VOLUME/ENTER/NAVIGATE] (5) accordingly

Switching on

Warning

Only operate the product from an approved socket that is connected to the public power supply. The socket must be installed close to the product and must be easily accessible.
Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug the power cord from the socket.
If using a multi-socket power strip, make sure that the total power consumption of all connected devices does not exceed the power strip’s maximum throughput rating.
If you will not be using the product for a prolonged period, disconnect it from mains power
Connect the mains cable to a properly installed and easily accessible mains socket.
Wait until the radio has initialised fully.
Press [POWER/VOLUME/ENTER/NAVIGATE] (5) to switch on the radio

Note – switching on for the first time

The Setup Wizard starts up automatically when the device is turned on for the first time.
At the initial start-up, the system interface will ask about the preferred language. Select your preferred language.

Language

To change radio’s menu language, proceed as follows:

Press [ ] (1) to access the Settings menu.
Use [POWER/VOLUME/ENTER/NAVIGATE] (5) to navigate to the “System” menu item.
Confirm the selection by pressing [POWER/VOLUME/ ENTER/NAVIGATE] (5).
Use [POWER/VOLUME/ENTER/NAVIGATE] (5) to navigate to the “Language” menu item. Confirm the selection by pressing [POWER/VOLUME/ENTER/ NAVIGATE] (5).
Use [POWER/VOLUME/ENTER/NAVIGATE] (5) to select your preferred system language.
The language setting currently selected is marked with an asterisk (*).

Note

The following languages are available: Czech, English, Danish, Dutch, German, Finnish, French, Italian, Norwegian, Polish, Portuguese, Slovak, Spanish, Swedish and Turkish

Care and Maintenance

Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
If you do not plan to use the product for a prolonged period, turn off the device and disconnect it from the power supply. Store it in a clean, dry place away from direct sunlight.

Warranty Disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/ mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

Declaration of Conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00054254] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://uk.hama.com 00054254 Downloads

Frequency band(s)	Bluetooth: 2,402 – 2,480 GHz
Maximum radio- frequency power transmitted	0.3 dBm (EIRP)

Restrictions or Requirements in Belgium, Bulgaria, Czech Republic, Denmark, Germany, Estonia, Ireland, Greece, Spain, France, Croatia, Italy, Cyprus, Latvia, Lithuania, Luxembourg, Hungary, Malta, the Netherlands, Austria, Poland, Portugal, Romania, Slovenia, Slovakia, Finland, Sweden, United Kingdom

To limit exposure to electromagnetic fields This device is intended for use at a distance of at least 20 cm from the body of the user or persons nearby. This device must not be worn or carried on the body

Consumption information according to directive (EU) No. 801/2013 amending the directive (EC) No. 1275/2008

Status	Duration of trigger time	Energy consumption (Watt)

Off state 0/I mains switch
(only on devices with 0/I mains switch)| –| ≤ 0.50 W
Manual standby
(Ready state (Standby) on devices without information or status indicator (manual))| –| ≤ 0.50 W
Manual standby
(Ready state (standby) on devices with information or status indicator (manual))| –| ≤ 1.00 W
Automatic ready state
(Standby on devices without information or status indicator)| ≤ 20 min| ≤ 0.50 W
Information or status display
(Automatic ready state (Standby) on devices with information or status indicator)| ≤ 20 min| ≤ 1.00 W

Press the Power button
** Not networked – “Maintain network connection – NO”.
Not available in FM mode, if present.

Please note that the actual power consumption can be dependent on multiple factors. These include the personal settings, the operating mode, the ambient temperature and the firmware version of the product used. The values set out above represent maximum values.
The actual reference values can be found at: www.hama.com -> 00054254 -> Downloads -> Consumption information

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Hama GmbH & Co KG is under license. Other trademarks and trade names are those of their respective owners.

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.