KILLER CUSTOM FNDR-BRK-13 Harley-Davidson Custom Front Fender Instruction Manual
- June 12, 2024
- KILLER CUSTOM
Table of Contents
ASSEMBLY
INSTRUCTIONS
HARLEY-DAVIDSON CUSTOM
FRONT FENDER 2013-2022 FOR
SOFTAIL BREAKOUT FXBS FXBR FXBRS
FNDR-BRK-13,
FNDR-BRK-18
FNDR-BRK-13 Harley-Davidson Custom Front Fender
These parts are handmade of fiberglass come with a black gelcoat finish. This
coating is not final use coating and will need to be top -coated (such as
paint) for final use. Minor surface imperfections and scuffs are normal and
may happen during taking parts out of the mold and shipping. This is
allowable as the coating will need to be scuffed for final top-coat
preparation.
For questions pertaining to the installation of this product, please contact
our Killer Custom technical department at
[email protected]. This product is
manufactured in Europe by Killer Custom
NOTE: Killer Custom assumes no responsibility or liability for damage or
injury of any kind arising out of the use or misuse of any products.
-
Check all clearances before, during and after installation. Warning: check the fitment of all parts before painting!
-
Remove the OEM fender from your motorcycle.
-
Put your new front fender on your motorcycle. The front edge of the fender is rounded to 2 mm radius.
Adjust its position with the included spacers between the shock and the fender and bolt it on. -
On the 2013-2017 Breakouts the font fender is offset so you need to use the longer spacers and bolts on one side.
-
There are predrilled holes on the fender, in some cases you may need to adjust the holes’ shape or position.
-
Use the thread locker glue (not included) for all treaded connections on the motorcycle and the installation is complete.
-
After the installation make a test drive to be sure everything is working perfectly.
NOTE:
- Installation of this kit requires detailed knowledge of the motorcycle model and mechanics. It is assumed that the installer has access to the proper tools and a working knowledge of them and factory service manuals.
- Before the painting the parts first you have to put those on the motorcycle and make sure that everything is adjusted and fits perfectly. Killer Custom will not be responsible for any fitment issues after paint.