ANKER 364 USB-C Dual 4K HDMI Hub User Manual
- June 12, 2024
- Anker
Table of Contents
ANKER 364 USB-C Dual 4K HDMI Hub
At a Glance
Item | Description |
---|---|
1. USB-C Port (Connects to Host) | Connects to a laptop. |
2. Power Indicator | Turns white when connected to a laptop. |
Flashes white once every second when upgrading firmware.
3. USB-A 3.2 Gen 1 Port| 5 Gbps data transfer.
4. USB-C 3.2 Gen 1 Port| 5 Gbps data transfer.
5. SD|
- UHS-I, 104 MB/s.
- The SD 3.0 card slot lets you insert an SD 3.0 card to copy files to and from your device.
6. PD-IN|
- Connect to a Power Delivery charger to charge a connected laptop or tablet.
- Supports up to 100W input.
7. Ethernet Port| Connect to a router or modem at 10/100/1000 Mbps.
8. HDMI Port| Up to 4K@60Hz output to a single display when connected to a
laptop.
Specifications
Data Speed | 5 Gbps |
---|---|
HDMI | Single Display: |
Up to 4K@60HzDual Display:
Up to 4K@30Hz
Supported Systems| Windows 10/11, macOS 10.14 and above
Important Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Do not expose to liquids
- For the safest and fastest charge, use original or certified cables.
- This product is suitable for moderate climates only.
- The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
- Open flame sources, such as candles, must not be placed near this product.
- Only use a dry cloth or brush to clean this product.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration
of conformity is available at the following internet address:
https://www.anker.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party contract for EU matters:
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance
with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012 & Electromagnetic Compatibility
Regulations 2016
The full text of the GB declaration of conformity is available at the
following internet address: https://www.anker.com.
The following importer is the responsible party contract for UK matters:
Anker Technology (UK) Ltd
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party contract for FCC matters:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
HIGH-DEFINITION MULTIMEDIA INTERFACE
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
Customer Service
Lifetime Technical Support
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only)
(US/CA) +1 (800)988 7973(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(Middle East & Africa) +971 42428633
(UAE) +971 8000320817
(KSA) +966 8008500030
(Kuwait) +965 22069086
(Egypt) +20 8000000826
(AU) +61 3 8331 4800
(TR) +90 0850 460 14 14
(RU) +8 (800) 511-86-23
(India) +91 18003138831
( 中国) +86 400 0550 036
( 日本) 03 4455 7823
( 한국 ) +82 02-1670-7098
For FAQs and more information, please visit:
anker.com/support
Documents / Resources
|
ANKER 364 USB-C Dual 4K HDMI
Hub
[pdf] User Manual
A83A2, 364, 364 USB-C Dual 4K HDMI Hub, USB-C Dual 4K HDMI Hub, Dual 4K HDMI
Hub, HDMI Hub, Hub
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>