NATIONAL INSTRUMENTS PCI/PXI-8212 Software for Windows User Guide

PCI/PXI-8212 Software for Windows
User Guide

Bridging the gap between the manufacturer and your legacy test system.
1-800-915-6216
www.apexwaves.com
sales@apexwaves.com

COMPREHENSIVE SERVICES
We offer competitive repair and calibration services, as well as easily accessible documentation and free downloadable resources.
SELL YOUR SURPLUS
We buy new, used, decommissioned, and surplus parts from every NI series. We work out the best solution to suit your individual needs.

Sell For Cash
Get Credit Receive
Trade-In Deal
OBSOLETE NI HARDWARE IN STOCK & READY TO SHIP
We stock New, New Surplus, Refurbished, and Reconditioned NI Hardware.

Please turn to the correct section for your operating system
No CD-ROM drive? Please see back cover for alternative installation options.

PCI/PXI-8212 for Windows 95

1. Insert the NI-488.2 CD, then choose Install NI-488.2 Software for Windows.
   

2. Shut down, then power off computer.
   

3. Install hardware and cables, then power on computer.
   

4. Install the PCI-PCI Bridge Driver.
   Windows automatically detects the new hardware.
   Follow the prompts in the Wizard. Select the recommended options when given a choice. If Windows asks where to search for a new driver, clear all checkboxes and click Next.

5. Install the Windows 95 Ethernet Driver.
   Windows automatically detects a new card.
   On older versions of Windows 95, a dialog box appears with three choices.
   a. Insert the PCI/PXI Ethernet Adapters CD.
   b. Choose Driver from disk provided by hardware manufacturer and click OK.
   c. In the next dialog box, enter the location of the PCI/PXI Ethernet Adapters CD and click OK.
   On newer versions of Windows 95, a dialog box appears with Back, Next, and Cancel buttons.
   a. Insert the PCI/PXI Ethernet Adapters CD.
   b. Follow the prompts in the Wizard.
   Tip: If you are using a PXI-8170 controller, you can load the Ethernet driver from c:\images\ethernet.
   Tip: If Windows reports that it cannot locate a file on the Intel PRO Adapter CD-ROM, insert the
   PCI/PXI Ethernet Adapters CD and let Windows copy the files from the top directory of the
   CD-ROM (typically d:\ ).
   Tip: If Windows reports that it cannot locate a file on the Windows 95 CD-ROM, insert the
   Windows 95 Installation CD and let Windows copy the files from either the top directory
   or the win95 directory of the CD-ROM (typically d:\ or d:\win95\ ).
   For Help installing your driver, refer to the PCI/PXI Ethernet Adapters Installation Guide (available on the PCI/PXI Ethernet Adapters CD). The installation guide also contains cabling instructions and troubleshooting tips.

6. Restart computer, then connect to your network.
   

7. Run NI-488.2 Getting Started Wizard.
   

PCI/PXI-8212 for Windows me/98

1. Insert the NI-488.2 CD, then choose Install NI-488.2 Software for Windows.
   

2. Shut down, then power off computer.
   

3. Install hardware and cables, then power on computer.
   

4. Install the PCI-PCI Bridge Driver.
   Windows automatically detects the new hardware.
   Follow the prompts in the Wizard. Select the recommended options when given a choice. If Windows asks where to search for a new driver, clear all checkboxes and click Next.

5. Install the Windows Me/98 Ethernet Driver.
   In most cases, Windows automatically detects the new hardware and installs the appropriate driver.
   If Windows displays an Add New Hardware Wizard dialog box, insert the PCI/PXI Ethernet Adapters CD and follow the prompts. Choose the recommended options when given a choice. If Windows asks
   where to search for a new driver, make sure the box next to CD-ROM Drive is checked, and click Next.
   Tip: If Windows reports that it cannot locate a file on the Intel PRO Adapter CD-ROM, insert the
   PCI/PXI Ethernet Adapters CD and let Windows copy the files from the top directory of the
   CD-ROM (typically d:\ ).
   Tip: If Windows reports that it cannot locate a file on the Windows CD-ROM, insert the Windows installation CD and let Windows copy the files from either the top directory or the win9x directory
   of the CD-ROM (typically d:\ or d:\win9x\ ).
   For Help installing your driver, refer to the PCI/PXI Ethernet Adapters Installation Guide (available on the PCI/PXI Ethernet Adapters CD). The installation guide also contains cabling instructions and troubleshooting tips.

6. Restart computer, then connect to your network.
   

7. Run NI-488.2 Getting Started Wizard.
   

PCI/PXI-8212 for Windows 2000/XP

1. Insert the NI-488.2 CD, then choose Install NI-488.2 Software for Windows.
   

2. Shut down, then power off computer.
   

3. Install hardware and cables, then power on computer.
   

4. Install software for PCI-GPIB. (Windows XP only)
   Verify the Install the Software Automatically option is selected and click Next.
   Click Finish option to complete the installation.

5. Install the Windows 2000/XP Ethernet Drivers.
   Windows 2000/XP automatically finds the new card and installs the drivers. You also may be prompted for the original Windows 2000/XP CD.
   For Help installing your driver, refer to the PCI/PXI Ethernet Adapters Installation Guide (available on the PCI/PXI Ethernet Adapters CD). The installation guide also contains cabling instructions and troubleshooting tips.
   Tip: If Windows XP displays an Add New Hardware Wizard dialog box, follow the prompts. Choose there commended options when given a choice.

6. Restart computer, then connect to your network.(Windows 2000 only)
   

7. Run NI-488.2 Getting Started Wizard.
   

PCI/PXI-8212 for Windows NT 4.0

1. Insert the NI-488.2 CD, then choose Install NI-488.2 Software for Windows.
   

2. Shut down, then power off computer.
   

3. Install hardware and cables, then power on computer.
   

4. Install the PCI-PCI Bridge Driver.
   Windows automatically detects the new hardware.
   Follow the prompts in the Wizard. Select the recommended options when given a choice. If Windows asks where to search for a new driver, clear all checkboxes and click Next.

5. Install the Windows NT 4.0 Ethernet Driver.
   Select Start» Settings» Control Panel» Network» Adapters and click Add. Click Have Disk and insert the
   PCI/PXI Ethernet Adapters CD when prompted. You also may be prompted for the original Windows NT CD.
   For Help installing your driver, refer to the PCI/PXI Ethernet Adapters Installation Guide (available on the PCI/PXI Ethernet Adapters CD). The installation guide also contains cabling instructions and troubleshooting tips.
   Tip: If you are using a PXI-8170 controller, you can load the Ethernet driver from C:\images\ethernet.

6. Restart computer, then connect to your network.

7. Run NI-488.2 Getting Started Wizard.
   

Alternative Driver Installation Options for the PCI/PXI-8212

The installation instructions illustrated for each operating system in this document are appropriate for most users. However, if your system does not contain a CD-ROM drive, try one of the following alternatives to load the GPIB and Ethernet drivers.

• If your system is not equipped with a CD-ROM drive, connect an external CD-ROM, such as a USB CD-ROM, and load the GPIB and Ethernet drivers directly from their respective CDs.

• Install the Ethernet driver first, and then download the GPIB driver from the National Instruments web site.
  1. Install the PCI/PXI-8212 in your computer.
  2. At startup, cancel the Add New Hardware Wizard that displays it has found a PCI Communication Device.
  3. Install the Ethernet driver using any of the other options on this page, as appropriate.
  4. Use the Ethernet connection to download the GPIB driver from the National Instruments web site. Access the
  Drivers and Downloads page at ni.com/download/.

• If your system contains a National Instruments PXI-8170 controller, the Ethernet driver is already loaded on the hard drive. When the installer prompts you for the location of the driver, you can select c:\images\ethernet instead of the CD-ROM. In fact, you may choose this option even if you do have an internal or external CD-ROM.

• If you have an existing Ethernet connection in your computer, download the Intel Ethernet driver from the National Instruments web site. Access the Drivers and Downloads page at ni.com/download/.

•  Use another computer that has a CD-ROM to copy the Ethernet driver onto a 3.5 in. floppy disk.
  1. Open a DOS command window.
  2. Change to the \MAKEDISK directory on the CD-ROM.
  3. Type: MAKEDISK [operating system][destination (optional; A: if not specified)] where [operating system] is the OS family you want to use with the diskette.
  W2K = Microsoft Windows 2000/XP
  NT = Microsoft Windows NT
  W9X = Microsoft Windows Me/98/95
  NW = Novell NetWare servers and clients
  DOS = Microsoft DOS and IBM OS/2

© 2000-2002 National Instruments Corporation. All rights reserved. Product and company
names mentioned herein are trademarks or trade names of their respective companies.

References

• Software and Driver Downloads - NI
• PCI-8212 National Instruments GPIB Instrument Control Module | Apex Waves

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>