SONOFF S55TPG Power Outlet WIFI Smart Instruction Manual
- June 12, 2024
- SonOFF
Table of Contents
SONOFF S55TPG Power Outlet WIFI Smart Instruction Manual
Operating Instruction
Power off
To avoid electric shocks, please consult the dealer or a qualified professional for help when installing and repairing!
The device weight is less than 1 kg, The installation height of less than 2 m is recommended.
Wiring instruction
Take the waterproof rubber stopper out before wiring, then punch holes and feed in wires.
Make sure correct wiring and install the waterproof rubber stopper into the socket.
1nstall upper cover
Attach the upper cover and open the waterproof cover, then fasten it to the bottom cover with Screws
Download APP
Power on
After powering on, the device will enter the quick pairing mode (Touch) during the firstuse. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please long press the pairing button for about 55 until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release.
Add the device
Tap “+”and select “Quick Pairing”, then operate following the prompt on the APP.
Compatible Pairing Mode
if you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode to piar
- Long press Pairing button for 55 until the Wi-Fi LED indicator changes in a cycle of two short flashes and one long flash and release. Long press Pairing button for 55 again unil the Wi-Fi LED indicator flashes quickly. Then, the device enters Compatible Pairing Mode.
- Tap“+ and select” Compatible Pairing Mode ” on APP. Select WI-Fi SSID with ITEAD-**++ and enter the password 12345678, and then g0 back to eWeLink APP and tap “Next”. Be patient unfil pairing completes.
Specifications
| M odel | SSSTPI/S55TPF/S55TPE/S55TPB/S55TPD/SSSTPG |
|---|
Input
| SSSTPI: 1 00-240V AC 50/60Hz 1 OA M ax
SSSTPF: 1 00-240V AC 50/60Hz 1 6A Max
A Max
STPB* 1252 50 60 6°HA .
S55lif !. :J..v!‹5â/tiH‘i›!7°’
Output
| SSSTPI: 1 00-240V AC 50/60Hz 1 0A M ax SSSTPF: 1 00-240V AC 50/60Hz 6A Max
M6A M
S55TtB: 12s 4c sole 6
S55TPGt 0”24 V 5Ot60Hz 1 Max
Wi-Fi| IEEE 802.11 b/gin 2.4GHz
0 perating systems| Android & iOS
Mate rial| PC
Dimension| 85x70x7 Omm
Product Introduction
Wi-Fi LED indicator status instruction
| Wi-Fi LED indicator status | Status instruction |
|---|---|
| Flashes (one long and two short) | Quick Pairing Mode |
| Keeps on | Device is connected successfuIIy |
| Flashes quickly | Compatible Pairing Mode |
| Flashes quickly once | Unable to dis cover the router |
| Flashes quickly twice | Connect to the router but fail to connect to Wi-Fi |
| Flashes quickly three times | Upgrading |
Features
555 is a smart waterproof scket specially designed for outdoor work, suitable for various occasions, including garden, patio, open-air restaurant and more. You can turn on/off, schedule on/off, voice control and share control the socket with your family via a smartphone.
Switch Network
Ifyou need to change the network, long press the pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and release, then the device enters quick pairing mode and you can pair again
Factory Reset
Deleting the device on the eWeLink app indicates you restore it to factory setting
Common Problems
Q: Why my device stays “Offline”?
A.The newly added device needs 1 – 2mins to connect Wi-Fi and network. If it stays offline for a long time, please judge these problems by the blue Wi-Fi indicator status:
- The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed to connect your Wi-Fi
- Maybe you have entered a wrong Wi-Fi password.
- Maybe there’s too much distance between the switch your router or the environment causes interference, consider getting close to the router. Iffailed, please add it again
- The 5G Wi-Fi network s not supported and only supports the 2.4GHz wireless network.
- Maybe the MAC address filtering is open. Please turn it off. Ifnone of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again.
- Blue indicator quickly flashes twice per second, which means your device has connected to Wi-Fi but failed to connect to the server. Ensure steady enough network. If double flash occurs frequently, which means you access an unsteady network, not a product problem. If thenetwork is normal, try to turn off the power to restart the switch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>