akasa A-NVD01-M1B Contemporary Styled Aluminium Fanless Case Instruction Manual
- June 12, 2024
- akasa
Table of Contents
A-NVD01-M1B Contemporary Styled Aluminium Fanless Case
Product Information
The product is the Jetson Nano B01, which supports various
motherboards including the Jetson Nano 2GB and Jetson Xavier NX. It
comes with a user manual and has two product codes: A-NVD01-A1B and
A-NVD01-M1B. The product is equipped with a power switch, power
LED, front panel layout, internal cable connectors, rear panel
layout, bottom cover layout, and various internal components such
as an aluminum heatsink and front panel PCB.
Front Panel Layout
The front panel layout includes internal cable connectors for
the power LED+ and power LED-, as well as the power switch. These
connectors should be connected to the corresponding motherboard
headers. It is important to refer to the motherboard manual to
ensure correct connection, as connecting the panel to the wrong
headers may result in motherboard damage.
Rear Panel Layout
The rear panel layout features a pre-installed rear I/O opening
and antenna fitting holes. Care should be taken when installing the
correct rear panel to ensure proper functionality.
Bottom Cover Layout
The bottom cover layout includes a camera module opening, GPIO
opening, and EMI gasket. The EMI gasket should be placed vertically
flat on the IO rear panel to prevent electromagnetic
interference.
Internal Layout
The internal layout consists of various components such as an
aluminum heatsink for heat transfer, front panel PCB, M/B mounting
standoffs, and other internal components.
Product Usage Instructions
-
Ensure that you have an ESD-controlled workstation. If not
available, wear an antistatic wrist strap or touch an earthed
surface before handling any PC components to prevent electrostatic
discharge. -
Handle the product with care during unpacking and setup to
avoid injury from metal edges. Keep the product away from
children. -
Install the correct rear panel before proceeding with the
setup. -
Refer to the motherboard manual to identify the correct headers
for connecting the front panel layout connectors, including the
power LED+ and power LED-, as well as the power switch. -
Connect the case internal cable connectors to the corresponding
motherboard headers. Ensure proper alignment and connection to
prevent motherboard damage. -
If applicable, follow the VESA mounting instructions provided
for mounting the product. -
If applicable, install the case feet according to the provided
instructions. -
For specific connections, refer to the product documentation
and identify the appropriate board headers for internal cables,
camera connectors, fan headers, PoE backpower headers, USB ports,
HDMI/DP ports, power jacks, SODIMM connectors, Ethernet jacks,
power LED, and USB Micro B.
Please consult the complete user manual for detailed
instructions and further information on product usage.
Jetson Nano B01
Support for Motherboards
Jetson Nano 2GB
Jetson Xavier NX
For Nano 2GB
Please install the correct rear panel first
User Manual
Product Code: A-NVD01-A1B / A-NVD01-M1B
GB CAUTION Electrostatic discharge (ESD) can damage system components. If an ESD-controlled workstation is not available, wear an antistatic wrist strap or touch an earthed surface before handling any PC components. WARNING Please be careful when unpacking and setting up this product as metal edges can cause injury if not handled with care. Keep away from children.
Front Panel Layout
Internal Cable Connectors
POWER LED+ POWER LED-
POWER SW
FR ATTENTION Une décharge électrostatique (ESD) risque d’endommager les composants du système. Si vous ne disposez pas d’une station de travail avec protection contre l’ESD, portez un bracelet antistatique ou touchez une surface reliée à la terre avant de manipuler les composants de l’ordinateur. AVERTISSEMENT Faites attention lors du déballage et de l’installation de ce produit car il comporte des coins métalliques coupants qui risquent de vous blesser s’ils ne sont pas manipulés avec soin. Garder loin des enfants.
Power button and LED connectors
Power switch
Power LED
GB Connect the case internal cable connectors to the corresponding motherboard headers.
NOTE : If the connectors are not apparent on the board consult your motherboard
manual. Connecting the panel to the wrong headers may result in motherboard damage.
D Vorsicht Elektrostatische Entladungen (ESD Electrostatic discharge) können
Systemkomponenten beschädigen. Sollte ein ESD geschützter Arbeitsplatz nicht
vorhanden sein, tragen Sie ein antistatisches Armband oder berühren Sie eine
geerdete Oberfläche bevor Sie mit den Arbeiten am Computer beginnen. Warnung
Seien Sie vorsichtig beim Auspacken und beim Aufbau dieses Produktes. Scharfe
Metallkanten könnten Verletzungen hervorrufen wenn ohne die nötige Vorsicht
vorgegangen wird. Von Kindern fernhalten.
ES CUIDADO Descargas electrostáticas (ESD) pueden dañar los componentes de su
sistema. Si no puede disponer de una estación de trabajo libre de
electrostática, use una muñequera antiestática o toque una superficie que haga
tierra antes de manipular los componentes del ordenador. PELIGRO Por favor sea
cuidadoso cuando desempaquete y ensamble este producto. Los filos de metal
pueden causarle cortes o heridas si no son manipulados adecuadamente. Aléjate
de los niños.
PT CUIDADO Descargas Eletroestáticas (ESD) podem danificar componentes do PC.
Caso não tenha uma bancada específica disponível, utilize uma pulseira anti-
estática ou toque uma superfície aterrada antes de manusear qualquer
componente. ATENÇÃO Por favor tenha cuidado ao desembrulhar e montar este
produto, as extremidades de metal podem machucar, caso o mesmo não seja
manuseado com cuidado. Manter fora do alcance das crianças.
RU () . , .
. .
Rear Panel Layout Pre-installed
· for Nano B01/Xavier NX
Rear I/O opening
Antenna fitting holes
· for Nano 2GB
Rear I/O opening
FR Branchez les connecteurs de câble internes du boîtier aux embases de carte mère
1
correspondantes.
REMARQUE : Si les connecteurs ne sont pas apparents sur la carte, consultez le manuel
de votre carte mère. Si vous connectez le panneau aux mauvaises embases cela risque
d’endommager la carte mère.
D Schließen Sie die Gehäuseinternen Kabel-Anschlüsse an die entsprechenden Motherboard-Anschlüße. HINWEIS: Wenn die Anschlüsse auf dem Motherboard nicht ersichtlich sind, schauen Sie bitte in ihren Motherboard-Handbuch nach. Ein Anschluss des Panels an die falschen Anschlüße kann dazu führen, dass das Motherboard beschädigt wird.
PT Conecte os cabos internos do gabinete, nas entradas correspondentes da placa-mãe. NOTA : No caso das entradas não estarem marcadas na placa-mãe, consulte o manual da mesma. Conectar os cabos numa entrada errada, pode danificar a placa-mãe.
ES Conecte los conectores de los cables del interior de la carcasa en los correspondientes cabezales de la placa base. NOTA: Si los conectores no aparecen en la placa, consulte el manual de la placa base La conexión del panel en los cabezales equivocados podría dañar la placa base.
RU
. : , .
2
.
CZ Pipojte konektory vnitního kabelu skín k odpovídajícím konektorm základní desky. POZNÁMKA: Pokud nejsou konektory na desce patrné, prostudujte si pírucku k základní desce. Pipojení panelu k nesprávným konektorm mze zpsobit poskození základní desky.
| JP |
|---|
CZ POZOR Elektrostatický výboj (ESD) mze poskodit soucásti systému. Pokud není k dispozici pracovní stanice s kontrolou ped ESD, pouzívejte antistatický emínek na zápstí nebo se ped manipulací s jakýmikoli soucástmi pocítace dotknte uzemnného povrchu. VAROVÁNÍ Pi vybalování a nastavování tohoto výrobku dávejte prozor, protoze kovové okraje mohou pi neopatrném zacházení zpsobit poranní. Udrzujte mimo dosah dtí.
Antenna fitting holes
CN , : ,,
JP
ESD
Bottom Cover Layout
Camera module opening
CN (ESD)ESD
GPIO opening
Contents
Nano B01 / Nano 2GB
Xavier NX
Nano B01 / Xavier NX Nano 2GB
x4
x3
Internal Layout
x4
x4
Aluminium heatsink
for heat transfer
Front panel PCB
x2
x2
M/B mounting standoffs
5140260911 V1
Installation
3
EMI gasket
Instructions for the placement
EMI gasket Please place vertically flat on
the IO rear panel.
(Conductive cotton can reach the conductive area of
the rear panel when the motherboard is installed)
Nano B01
Nano B01 / Nano 2GB
Nano 2GB
5
6
Nano B01 / Nano 2GB
Xavier NX
Xavier NX
4
Connections
Internal cable to the motherboard
Nano B01 Board header: J50
J50: Power Button: Pin 11 12 (pin 11 Ground, pin 12 Power Button) Power
LED Light: Pin 1 2 (Pin 1 LED -, Pin 2 LED +)
Nano 2GB Board header: J12
VESA Mounting Instructions
1
2
3
Case Feet Installation
1
2
J12: Power Button: Pin 11 12 (pin 11 Ground, pin 12 Power Button) Power LED Light: Pin 1 2 (Pin 1 LED -, Pin 2 LED +)
Xavier NX Board header: J14
Button Header [J14] Camera Conn. #1 [J1] [J17]
Optional CAN Bus Header
[J13] Fan Header
Camera Conn. #2 [J9]
Optional PoE Backpower Header
[J18]
USB 3.0 Type A [J7] (x2 Stacked) [J6]
HDMI Type A / DP [J8] Power Jack [J16] [J12] 40-pin Exp Header
[J2] SODIMM Conn. [J19] Optional PoE Header
[J15] Ethernet Jack [DS1] Power LED [J5] USB Micro B
J14: Power Button: Pin 11 12 (pin 11 Ground, pin 12 Power Button) Power LED Light: Pin 1 2 (Pin 1 LED -, Pin 2 LED +)
2022/06
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>