SONY STR-DN1080 7.2ch Home Theatre AV Receiver Owner’s Manual

SONY STR-DN1080 7.2ch Home Theatre AV Receiver

Product Information

(Surround Mode), 165
W per channel
Power Requirements| USA, Canada, Taiwan: 120 V AC, 60 Hz | Oceania, Europe: 230 V
AC, 50 Hz
Analog Input Sensitivity| 500 mV/50 kilohms S/N: 105 dB (A, 500 mV)
Digital (Coaxial) Input Impedance| 75 ohms S/N: 100 dB (A, 20 kHz LPF)
Digital (Optical) Input S/N| 100 dB (A, 20 kHz LPF)
Analog Output (ZONE 2) Voltage| 2 V/1 kilohm
Subwoofer Output Voltage| 2 V/1 kilohm
Tuning Range (FM tuner section)| Not specified in the manual
Video Inputs/Outputs| Video: 1 Vp-p, 75 ohms
HDMI Video Resolution| 480p/60 Hz, 576p/50 Hz, 720p/60 Hz, 50 Hz, 30 Hz, 24 Hz,
1080i/60 Hz, 50 Hz, 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz, 4K/60
Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz (* VIDEO 1 supports YCbCr 4:2:0 8
bit only)
Bluetooth Compatibility| Works with iPhone 7, iPhone SE, iPhone 6s, iPhone 6, iPhone 5s,
iPhone 5c, iPhone 5, iPhone 4s, and iPod touch (5th and 6th
generation). AirPlay works with iPhone, iPad, and iPod touch with
iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC
with iTunes 10.2.2 or later. SongPal app can be used with this
receiver via Bluetooth or network connection. iPhone/iPad/iPod
playback via a USB port is not possible.
USB Port| Type A (For connecting USB flash drive), Maximum current: 1
A
Network Connectivity| Ethernet LAN: 100BASE-TX, Wireless LAN: IEEE 802.11 a/b/g/n,
Security: WPA/WPA2-PSK, WEP, Radio frequency: 2.4 GHz, 5 GHz
Bluetooth Specifications| Communication system: Bluetooth Specification version 4.1,
Output Power Class 1, Maximum communication range: Line of sight
approx. 30 m (98.4 feet), Modulation method: FHSS (Freq Hopping
Spread Spectrum), Compatible profiles: A2DP 1.2 (Advanced Audio
Distribution Profile), AVRCP 1.5 (Audio Video Remote Control
Profile), Supported Codecs: SBC, AAC, LDAC

Product Usage Instructions

To ensure the optimal usage and performance of the STR-DN1080/ZA810ES, please follow these instructions

1. Keep your PC used for service and checking of this unit is always updated with the latest version of your anti-virus software to prevent any virus from affecting the unit during service.
2. In case you find a virus-affected unit during service, contact your Service Headquarters for further assistance.
3. Connect the appropriate speakers to the front, center, surround, and surround back speaker terminals of the receiver.
4. Make sure the power requirements match your region: USA, Canada, Taiwan – 120 V AC, 60 Hz | Oceania, Europe – 230 V AC, 50 Hz.
5. Adjust the analog input sensitivity and digital input impedance settings based on your audio source’s specifications.
6. Connect your video devices to the designated video inputs/outputs using standard RCA cables.
7. Set the HDMI video resolution according to your display device’s capabilities and preferences.
8. Ensure Bluetooth compatibility with your iPhone, iPad, iPod touch, and other devices as specified in the manual. Use the SongPal app for enhanced control and functionality.
9. When using the USB port, connect a USB flash drive for media playback. Note that iPhone/iPad/iPod playback via USB is not supported.
10. For network connectivity, use the Ethernet LAN or wireless LAN (IEEE 802.11 a/b/g/n) based on your network configuration. Ensure proper security settings (WPA/WPA2-PSK, WEP) and select the appropriate radio frequency (2.4 GHz, 5 GHz).
11. Pair your Bluetooth-enabled devices with the receiver using Bluetooth Specification version 4.1. Ensure line-of-sight communication within approximately 30 meters (98.4 feet) for optimal signal strength.

SPECIFICATIONS

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION (USA models only) With 6 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.

• Amplifier section1)Minimum RMS Output Power
  

  • (6 ohms, 20 Hz – 20 kHz, THD 0.09%) 100 W + 100 W

• Stereo Mode Output Power

  • (6 ohms, 1 kHz, THD 0.9%) 120 W + 120 W

• Surround Mode Output Power 2)

  • (6 ohms, 1 kHz, THD 0.9%) 165 W per channel

1. Measured under the following condition

2. Reference power output for front, center

   • Frequency response Analog
     10 Hz – 100 kHz, +0.5/–2 dB (with sound field and equalizer bypassed)

   • Input Analog Sensitivity
     500 mV/50 kilohms S/N 3): 105 dB (A, 500 mV 4)

   • Digital (Coaxial) Impedance
     75 ohms S/N: 100 dB (A, 20 kHz LPF)

   • Digital (Optical)
     S/N: 100 dB (A, 20 kHz LPF)

   • Output (Analog) ZONE 2
     Voltage: 2 V/1 kilohm

   • SUBWOOFER
     Voltage: 2 V/1 kilohm

   • Equalizer Gain levels
     ±10 dB, 1 dB step

3. INPUT SHORT (with sound field and equalizer bypassed).

4. Weighted network, input level.

FM tuner section

Tuning range

• USA and Canadian models
  87.5 MHz – 108.0 MHz (100 kHz step)

• Other models
  87.5 MHz – 108.0 MHz (50 kHz step)

• Antenna (aerial)
  FM wire antenna (aerial)

• Antenna (aerial) terminals
  75 ohms, unbalanced

Video section

• Inputs/Outputs Video
  1Vp-p, 75 ohms

HDMI Video

• Resolution
  • 480p/60 Hz
  • 576p/50 Hz
  • 720p/60 Hz, 50 Hz, 30 Hz, 24 Hz
  • 1080i/60 Hz, 50 Hz
  • 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
  • 4K/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
  • VIDEO 1 supports YCbCr 4:2:0 8 bit only
• Support
  • HDCP2.2, HDR (HDR10, Hybrid Log-Gamma, Dolby Vision), 3D, Deep Color, ITU-R BT.2020, eARC/ARC

iPhone/iPad/iPod section
BLUETOOTH technology works with iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, and iPod touch (5th and 6th generation.) AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later.You can use “SongPal” app with this receiver via BLUETOOTH or network connection. iPhone/iPad/iPod playback via (USB) port is not possible.

USB section

• USB port
  • Type A (For connecting USB flash drive) Maximum current 1 A

Netw ork section

• Ethernet LAN
  • 100BASE-TX
• Wireless LAN Compatible standards
  • IEEE 802.11 a/b/g/n
• Security
  • WPA/WPA2-PSK, WEP
• Radio frequency
  • 2.4 GHz, 5 GHz

BLUETOOTH section

• Communication system
  • BLUETOOTH Specification version 4.1
• Output
  • BLUETOOTH Specification Power Class 1
• Maximum communication range
  • Line of sight approx. 30 m (98.4 feet)1)
• Frequency band
  • 2.4 GHz band (2.4000 GHz – 2.4835 GHz)
• Modulation method
  • FHSS (Freq Hopping Spread Spectrum)
• Compatible BLUETOOTH profiles 2)
  • A2DP 1.2 (Advanced Audio Distribution Profile)
  • AVRCP 1.5 (Audio Video Remote Control Profile)
• Supported Codecs 3)
  • SBC 4) , AAC, LDAC
• Transmission range (A2DP)
  • 20 Hz – 40,000 Hz (LDAC sampling frequency 96 kHz with 990 kbps transmission)
  • 20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)

1. The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.
2. BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.
3. Codec: Audio signal compression and conversion format
4. Subband Codec

General
Power requirements

Operating frequency and maximum output power (for European models)

Wireless LAN/BLUETOOTH

Wireless LAN

NFC

• Power consumption
  •  240 W
• European models
• Standby mode:
  • 0.4 W (When [Control for HDMI], [Standby Through], [Bluetooth Standby], and all zone power are set to [Off].)
• Bluetooth Standby mode:
  • 1.5 W (When [Bluetooth Standby] is set to [On], and [Control for HDMI], [Standby Through], and all zone power are set to [Off].) Networked standby (all wired network ports are connected, all wireless network ports are activated):1.5 W
• Other models
• Standby mode:
  • 0.4 W (When [Control for HDMI], [Standby Through], [Remote Start], [Bluetooth Standby],[Network Standby], and all zone power are set to [Off].)
• Bluetooth Standby mode
  • 2.5 W (When [Bluetooth Standby] is set to [On], and [Control for HDMI], [Standby Through], [Remote Start][Network Standby], and all zone power are set to [Off].)
• Dimensions (width/height/depth) (Approx.)
  • 430 mm × 156 mm × 331 mm (17 in × 6 1/4 in × 13 1/8 in) including projecting parts and controls
• Mass (Approx.)
  • 9.1 kg (20 lb 1 oz) (USA, Canadian and Taiwan models) 9.7 kg (21 lb 6 oz) (European and Oceanian models)

Supplied Accessories

• Supplied Accessories
• R03 (size AAA) batteries (2)
• FM wire antenna (aerial) (1)
• Calibration microphone (1)
• Design and specifications are subject to change without notice.

SECTION 7 EXPLODED VIEWS

Note

• -XX and -X mean standardized parts, so they may have some diff erence from the original one.
• Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not sup-plied.
• Color Indication of Appearance Parts Ex-ample: KNOB, BALANCE (WHITE) . . . (RED)
• The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specifi ed.
• The components identifi ed by mark 9 con-tain confi dential information. Strictly follow the instructions whenever the components are repaired and/or replaced.

CASE, ANTENNA SECTION

• Note 1: When the WLAN/BT combo card (Ref. No. WIFI1) is replaced, refer to “NOTE OF REPLACING THE MB-1613 BOARD OR WLAN/BT COMBO CARD” on page 7.
• Note 2: Refer to “Pasting position of the HI-RES label” on page 96 for more about the pasting position of HI-RES LABEL (Ref. No. 1).

MB-1613 BOARD SECTION

• Note 1: When the complete MB-1613 board (Ref. No. 51) is replaced,  refer to “NOTE OF REPLACING THE MB-1613 BOARD OR WLAN/BT COMBO CARD” on page 7.
• Note 2: The Ref. No. #11 screw has been changed during production for the AEP, UK, AUS models. Check the shape of this screw before replacing it.
• Note 3: These parts have been added during production for the AEP, UK, AUS models of the DN1080. These parts have been at-tached from the fi rst production lot for the TW model of the DN1080.

POWER SUPPLY SECTION (STR-DN1080)

• Note 1: Refer to page 86 for the STR-ZA810ES.
• Note 2: The Ref. No. #11 screw has been changed during production for the AEP, UK, AUS models. Check the shape of this screw before replacing it.

POWER SUPPLY SECTION (STR-ZA810ES)

• Note: Refer to page 85 for the STR-DN1080.
• Note 2: The Ref. No. #11 screw has been changed during production for the AEP, UK, AUS models. Check the shape of this screw before replacing it.

MAIN BOARD SECTION

• Note: The Ref. No. #11 screw has been changed during production for the AEP, UK, AUS models. Check the shape of this screw before replacing it.

FRONT PANEL SECTION

Note: When the DISPLAY board, NFC-ICON board or BTW board is repaired or the NFC module (Ref. No. NFC1) is replaced, refer to “NFC CONNECTION CHECKING METHOD” on page 9.

HEAT SINK SECTION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>