MOZA AIRCROSS-S Camera Stabilizer Instructions

: June 12, 2024
: Moza

Table of Contents

AIRCROSS-S Camera Stabilizer
Record Button
Button Functions
Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AIRCROSS-S Camera Stabilizer

MOZA AirCross S Professional Camera Gimbal Stabilizer User Manual

Battery and charging:

The AirCross S has a built-in lithium battery. Fully charge the battery before use. The LED power indicator blinks when the battery level is less than 20%. Charge it with an universal USB-C cable, AirCross S can be charged through a phone charger and mobile power supplier. The charging stops automatically when the battery is fully charged.

Note:

Please do not over-charge or over-discharge the battery. Otherwise the battery will be damaged.
Recharge and discharge the battery every 3 months to keep it intact if it is left unused for a long time.
L-shaped quick release plate
Arka quick release plate
Quick lock wrench
Anti out of stock
Pan arm lock knob
Menu key
Joystick
Pitch mechanical lock
Roll arm locking knob
Roll motor
Roll mechanical lock
Screen
Indicator lights
1/4 screw hole
Pitch motor
Roll arm
Pan arm
Course mechanical lock
Switch
Charging USB port
Tilt arm locking knob
Camera control interface
Yaw motor
Record key

Record Button

Trigger Button
Reset Hole
Store and Expand the AirCross S
AirCross S is equipped with a three-axes storage lock for gimbal storage and leveling.
Unlock the pan storage lock, roll storage lock and tilt storage lock to turn on the three-axes motor.
Rotate the roll arm 90° counterclockwise, and then lock the roll storage lock.
Mounting and Balancing the Camera
Tilt Axis Leveling
Place the longer side of the quick release plate under the camera, and secure the camera with a 1/4”screw.
Loosen the quick release plate lock knob, slider the shorter side of the quick release plate into center of the quick-release base, then lock the knob.
Fine-tune the quick-release plate back and forth until the
lens is horizontally forward, then lock the knob.
(From a left view,) Rotate the tilt arm 90° clockwise, loosen the tilt knob, adjust the tilt arm left and right until the lens is straight up (leveled), then lock the knob.

Note: How to judge whether the tilt axis is leveled?
Answer: Once the tilt axis is leveled, the lens can maintain balance and stability at any angle
Roll Axis Leveling
(From a front view,) Unlock the roll storage lock, loosen roll lock, adjust the roll arm left and right until it is balanced horizontally, and then lock the knob.

Note: How to adjust the arm smoothly
Answer: For precise adjustment, it’s recommended to keep the arm with your hand when leveling.
Pan Axis Leveling

Unlock the pan storage lock, loosen pan lock, rotate the pan arm 90° clockwise, adjust the pan arm left and right until it is balanced horizontally, and then lock the knob.

Button Functions

Joystick
Move upwards: phone camera turns up
Move downwards: phone camera turns down
Move leftwards: phone camera turns left Move rightwards: phone camera turns right The speed of camera moving increases with the larger moving range of joystick
Menu
Single Click：Menu
Double Click：Inception
Trigger
Double press: Re-center
Single press: Auto focus (some cameras are not supported)
Triple press: Switch to selfie mode
Hold: Switch to tilt follow mode
Triple press and hold: Switch to All-locked mode
Record
Single click：Start/End recording
Double Click：Shoot