BRAUN B-Box T5 Dashcam Full HD Camera User Guide
- June 12, 2024
- Braun
Table of Contents
BRAUN B-Box T5 Dashcam Full HD Camera
Features
Introduction
Package Contents
The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately.
-
Inside your Package
-
Suction Cup
-
Car Power Adaptor
-
Driving Recorder
-
Quick Start Guide
Product Overview
Getting Started
Inserting the Memory Card
Follow the direction indicated by the silk printing on the device to insert the memory card, a click sound is heard indicating the card is in position.
To remove the memory card, push to eject the memory card out of the slot.
Note:
- Do not remove or insert the memory card when the device is turned on. This may damage the memory card.
- Please use a Class 10 or higher rating Micro SD card, max. up to 32GB.
- Please format the micro SD card before the initial use.
- When removing the memory card, be careful that the card may spring out and get lost. The memory slot has this spring-out feature for easy removal of the card.
Inserting the Memory Card
→ Push the head of the mount into the device slot, make sure the mount is
securely locked in place.
→ Remove the protective film from the suction cup, with the suction-cup
laying flat, position the suction-cap on the windshield, and then press down
the clamp to mount the holder to the windshield. Make sure the base is
securely locked in place.
→ Loosen the knob to swivel the device vertically. Locking knob, and
confirm that the device is securely locked in place.
→ Rotating the device to have proper view.
Connecting to Power
Use only the attached car power adaptor for activating the device and charging
the built-in battery.
- Connect one end of power connector to USB port ” on the device.
- Plug the other end of the power adaptor to the cigarette lighter socket of your vehicle. Once the vehicle engine is started, the device automatically turns on.
Powering the Device On/ Off and Reset
Auto Power On / Of
Once the vehicle engine is started, the device automatically turns on and recording (must have SD Card). After the car engine stopped, the device will automatically save the last recorded file and shutdown.
Manual Power On / off
Press [POWER] to turn it on. To power off the device press [POWER] with 3
seconds again.
Reset the Device
In case the device fails to function normally due to unknown causes, please
use a pin to poke the
[RESET] hole, then press [POWER] to restart the device.
Set the Date / Time
To set the correct date and time, press [MENU] to enter the menu setting mode,
then press [UP] /[DOWN] to select Date/Time, press [OK] enter date /time
setting, then press [UP] /[DOWN] to adjust the value, press [OK] switch to
next setting, after finished all the settings, press [OK] to back menu
setting, them press [Menu] to exit from menu setting.
A Key Protection
During recording, press [LOCK] to protect current video, the lock icon appears
on the screen, the current movie clip will be protected cannot be replaced,
the next movie clip will unlock automatically and can be replaced if the SD
card is full.
Audio On / Off
During recording, press [DOWN] can turn Off I On the audio.
Playback and media connection
Playback mode
In preview mode, press [MODE] twice to enter playback mode.
- Press [ UP] /[DOWN ] to scroll through the files
- Press [OK] to start /stop playback
- Press [MODE] twice again to exit playback mode
Note:
While viewing the file list. you can press [MENU] to select to:
- Delete one file or all the files.
- Protect/lock or unprotect/unlock one file or all the files
Connect to your PC
a) In order to view recorded video on Computer, please remove memory card
from DVR and using a SD card reader (not included), insert into a computer.
Files can be viewed in the same way as a digital camera
b) Connect the camera to computer using a USB cable (not included). Files
can be viewed in the same way as a digital camera.
Technical specifications
| LCD display | 3. O” color TFT screen |
|---|---|
| Image sensor | 1 Mega Pixels CMOS Sensor |
| View angle | 120° |
| Video resolution | 1280×720 30fps, 1920×1080 30fps (interpolated) |
| Picture resolution | 2M (Interpolated) |
| Video format | AVI |
| Picture format | JPG |
| Memory | Support Class 10 or higher rating Micro SD card, maximum up to 32GB |
| Microphone | Built-in |
| Speaker | Built-in |
| G-sensor | Yes |
| Power source | Built-in battery, car power adaptor |
| Interface | USB port, SD card slot |
| Operating temperature | 0°-45° C |
| Input | 5V/1.0A |
| Dimensions | 89.0 x 54.0 x 34.3mm |
| Weight | 88.0g |
Technical Support
We are committed to providing the best customer service support.
If you need assistance with your BRAUN product, please contact the BRAUN
Technical Support department prior to returning this device.
Reach out to us in any of the following ways:
E-Mail: post@braun-phototechnik.de
Web: www.braun-phototechnik.de
+49 (0) 7457 / 9465-60
Radio and TV Interference Statement
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to part of the CE rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
To view the associated declaration of conformity, please visit our website.
BRAUN PHOTO TECH NIK GmbH
Merkurstral\e 8 72184 Ettinger / GERMANY
Tel.: +49 (0) 7457 / 9465-60
Cautions
Please read all safety precautions before using the device.
-
Make sure that the lens is within the wiping range of the windshield wiper to ensure a clear view even when it rains.
-
A protective film on the lens will affect the video or photographic effect, remove the protective film before using the device.
-
Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos or snapshots.
Clean the lens on a regular basis. -
Make sure that the installation position is not hindered by the tinted window
-
Use the contained car power adaptor only. In order to avoid equipment burn or cause the battery explosion, please do not use other brand car power adaptor.
-
Due to local laws and vehicles safety considerations, do not operate the device while driving.
-
Set up time and date accurately before you use this device.
-
This product gets warm when in use, this is normal.
-
Do not place the device near a heat source or directly expose it to flame or heat.
-
Never place the device in vicinity of equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or data corruption and loss.
-
The system is used only for non-commercial use, within the maximum limits permitted by applicable law.
Our company does not accept any responsibility for any data loss during the operation. -
Improper use or operation of the product may result in damage of the product or its accessories and void the warranty.
Before you start using the system, it is assumed that you agree to the above statement.
Customer Support
BRAUN PHOTO TECHNIK GMBH
MERKURSTRASSE S,
72184 EUTINGEN I GERMANY
WWW.BRAUN-PHOTOTECHNIK.DE
Made in china
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>