dyson Solarcycle Morph Desk Lamp User Manual
- June 12, 2024
- dyson
Table of Contents
User manual
Solarcycle Morph Desk Lamp
2 Activating your guarantee
3 Assembling your light
3 Positioning your light
4 Colour temperature and brightness| 4 Settings
5 Disabling/Enabling Bluetooth ®wireless technology
5 USB-C charging point
---|---
CD06 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.01
Thank you for choosing to buy a Dyson Light
Take full control with the Dyson Link app.
Get step-by-step set up and support.
Control how and when your Dyson Light operates.
Download the Dyson Link app
Download the Dyson Link app from the App store or Google Play.
Open the app and follow the on-screen instructions to create a new account.
For further information and support: https://www.dyson.co.th/en-TH/support
/contact-us
+66 2026 6325
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in
the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
The Bluetooth ® word mark and logos are registered trade marks owned by the
Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.
Activating your guarantee
We don’t stop caring about our machines once they’re yours. Even after your
guarantee has ended, we’ll still be on hand to help.
Your serial number can be found on the rating plate located on the bottom of
your light.
Note your serial number for future reference.
This illustration is for example purposes only.
Assembling your light
We’ve engineered the box to help you assemble your light.
Lift the base and place vertically in the slot in the box.
Insert the main body into the hole in the top of the base, making sure it’s
level.
Insert the locking nut into the bottom of the base. Turn it clockwise until
tight.
Insert the power cable into the base, making sure it sits in the cable guide.
Remove any protective wrapping from your light.
Plug in and switch on.
Download the Dyson link app and add your light.
Positioning your light
You can easily change the position of your light by independently rotating the optical head, arm and stem up to 360°.
Colour temperature and brightness
Swipe to change the colour temperature of the light from warm through to cool.
Swipe to change the brightness of the light.
Tap to change quickly between colour temperatures.
Tap to change quickly between brightness levels.
To find out more about colour temperature and brightness levels, and to get the best from your light, go to the Dyson Link app or online at: http://dyson.com/mylcm
Settings
For more information about using your light without connecting to the Dyson Link app: http://dyson.com/mylcm
Disabling/Enabling Bluetooth ® wireless technology
Your light has Bluetooth® wireless technology enabled by default.
Press and hold the middle button until the LED lights on the three buttons
blink.
The main light source will turn off and then on again to show that Bluetooth
has been disabled.
To re-enable Bluetooth, repeat the instructions above. The main light will
blink twice to show that Bluetooth has been re-enabled.
USB-C charging point
