dotmodretail dotStick Revo User Manual

dotmodretail dotStick Revo

Nicotine safety

WARNING: sale to or use of this product by minors is strictly prohibited.

RECOMMENDED USE
This product is intended for use as an electronic cigarette to receive nicotine or other dosages for your personal requirements. Do not drink the e-liquid and avoid direct contact with your skin or eyes.

STORAGE AND DISPOSAL
Keep the container tightly closed and in an upright position. Store e-liquids in a cool, dark, & dry place. Keep out of the reach and sight of children and animals. Dispose of unused e-liquid according to local regulations.

CONTRAINDICATIONS
If you suffer from any of the following conditions, talk to your doctor or pharmacist before using this product: heart, throat or lung disease; kidney or liver disease; stomach ulcer or inflammation of the stomach or esophagus; an overactive thyroid gland or pheochromocytoma; diabetes.

SPECIFIC RISK GROUPS
This product is not recommended for use by pregnant or lactating women.

POSSIBLE ADVERSE EFFECTS
New users of electronic cigarettes may experience dry throat, dry cough, mild pain or irritation of the mouth or respiratory tract. If the symptoms become severe or last for more than 48 hours, please see a general practitioner and report the incidences by following the information given in “Reporting Adverse Effects.” Possible nicotine withdrawal adverse effects, irritability or aggression, feeling low, anxiety, restlessness, poor concentration, increased appetite or weight gain, urges to smoke (craving), nighttime awakening or sleep disturbance, lowering of heart rate.

ADDICTIVENESS AND TOXICITY
This product contains Nicotine which is a highly addictive substance and is thus not recommended for use by non-smokers. No other ingredient of this product is known to be addictive. This product contains Nicotine which may produce toxic effects if consumed orally, especially in infants and children. Please DO NOT drink e-liquid. In case it is consumed, please take your e-liquid bottle with you and see a general practitioner immediately. In case of contact with skin, rinse immediately with cold running water for at least 15 minutes.

REPORTING ADVERSE EFFECTS
If you experience any side effects as a result of using this product, please help us by informing us about it so that we can continue to improve the safety of our products. Visit: https://dotmod.com/pages/health-safety to fill out our Safety concerns form.

Alternately, you can also report your symptoms directly to MHRA using the Yellow Card Portal available at https://yellowcard.mhra.gov.uk/yellowcards/tobacoreportmediator/ 88 Wood St. London, EC2V 7RS United Kingdom

PROPOSITION 65 WARNING: This product can expose you to chemicals including Nicotine, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Capacitor Safety

WARNING

• Super capacitor’s are volatile and may explode or burn if charged, used, transported, stored, or disposed of improperly. See user manual for important precautions and warnings.
• Capacitors may be used to store large amounts of energy. device should not be opened to prevent possibility of electrocution, no serviceable components.
• If you witness the capacitor starting to balloon, swell, smoke, or become very hot: immediately discontinue use, turn off the device, place it on a non-flamable surface in a well ventilated area away from people and pets.
• Always have a fire extinguisher handy in the event of a fire
• Do not throw capacitors into a fire. Please recycle or dispose of according to local law.
• Keep capacitors away from children and pets.
• Should a child/pet swallow or chew on a capacitor, immediately consult a physician and/or call your local poison control center.
• Failure to follow warnings may result in electric shock, fire, burns, property damage, or bodily injury.
• For additional safety information and warnings, please visit www.dotmod.com dotmod, Inc. is not responsible for any damage or injury resulting from improper use, charging, transport, storage, and/or maintenance of this device.

Know your dotStick

Installing and replacing the coil

1. Remove the tank section from the device.
2. Turn the tank upside down and pull the coil out of the tank section by holding the coil firmly.
3. Insert the new coil and press it securely into the tank.
4. Align the tank with the body recess, and put the tank back in place.

Filling the tank
Remove the tank from the unit, locate the fill port and turn it upside down. Using the unicorn bottle, press the tip of the bottle into the fill port. Once filled, put the tank back on the device.

Battery status and indicator lights

Red lights

• Shutdown: Press the button five times within two seconds to shut down. The red light flashes three times quickly.
• Before and during use, the red light will flash eight times when the power is too low.

White lights

• Atomizer not detected
• Power on: White light turns from dim to bright within 2 seconds. The brightest light stays on for 0.5 seconds, then goes out.

Green lights

• When the battery is full, the green light will be solid. The light will turn off after 305 of constant light time.
• Power Adjustment: In the power-on state, press button three times to switch the power level. The default power level is green.

Cyan lights

• Timeout: Device times out after ten seconds. Cyan light flashes rapidly three times.

Changing the power levels

Press the fire button three times to enter power selection mode

Protection Status

1. Short-circuit protection: The output is not available, two white lights flash twice when the fire button is pressed.
2. Open circuit protection: The output is not available, and when the fire button is pressed, two white lights flash three times quickly when the fire button is pressed.
3. Resistance protection: The load resistance is not between the selected values. If the load resistance value is not between the selected resistance value, it cannot output. When pressing the fire button, the two white lights will flash four times.
4. PCB board over temperature protection: PCB board temperature exceeds +75*c, unable to output. Two red lights will quickly flash five times.
5. Battery protection: Overcharge protection, over discharge protection, overcurrent protection, short circuit protection.

Operation instructions

1. Power on: Click the fire button five times in quick succession. The light indicator will blink for two seconds to indicate confirmation.
2. Power off: Click the fire button five times in quick succession. The light indicator will flash red three times to indicate confirmation.
3. Adjusting power output: See the chart in “Power Level Selection”. ** Bypass mode is not compatible with plug-in coil tanks.
4. Pulsing frequency of the light: When charging the light pulses are related to the charging power, when entering the fast charging mode, the pulsing frequency of the light is about 15 once, when it is not fast charging, the pulsing frequency of the light is about 25 once.
5. Atomizer detection: When the atomizer is plugged in or removed, Dotstick V2’s white light will pulse once.

Customer Service

Our Customer Service
Department is happy to help! We encourage you to reach out to [email protected] or any questions or concerns
regarding your device.
Customer Service
Department hours: Monday – Friday
9:00 AM PST – 5:00 PM PST

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>