PHILIPS BDP103 Town Guide Performer User Guide
- August 31, 2024
- Philips
Table of Contents
PHILIPS BDP103 Town Guide Performer
Specifications :
- Product: TownGuide Performer BDP103 LED50/740 II DS PCC BK CLO 76P
- Lamp Family Code: LED50 [LED module 5000 lm]
- Light Source: LED, replaceable
- Safety Class: II
- Color Temperature: 740 neutral white
- Operating Voltage: 220-240 V
- Power Consumption: 34 W
- Ingress Protection: IP66 (Dust penetration-protected, jetproof)
- Impact Protection: IK10 (20 J vandal-resistant)
- Warranty Period: 5 years
Product Usage Instructions
Installation:
- Ensure the mounting device is suitable for a post-top with a diameter of 76 mm.
- Connect the lighting fixture using the provided 5-pole screw connection block.
- Securely fasten the optical cover to the luminaire.
Operation :
- Apply an input voltage of 220-240 V at a frequency of 50 to 60 Hz.
- The luminaire has a power consumption of 34 W with a power factor of 0.96.
- The initial performance specifications ensure accurate and efficient lighting output.
Maintenance :
- Regularly clean the optical cover and surfaces to maintain optimal light output.
- If any component needs replacement, ensure to use compatible parts as per the datasheet.
FAQ :
-
Q: What should I do if the luminaire is not functioning?
A: Check the power connection and ensure the input voltage is within the specified range. If issues persist, contact customer support for assistance. -
Q: Can I replace the LED module myself?
A: Yes, the LED module is replaceable. Refer to the datasheet for detailed instructions on replacing components. -
Q: Is the luminaire suitable for outdoor use?
A: Yes, the luminaire is designed for outdoor use with appropriate protection against dust and water jets (IP66).
TownGuide Performer
BDP103 LED50/740 II DS PCC BK CLO 76P TOWNGUIDE PERF CLASSIC T, LED module
5000 lm, 740 neutral white, Safety class II, Distribution symmetrical,
Polycarbonate bowl/cover clear, Black, Post-top for diameter 76 mm
The TownGuide Performer family consists of six recognizable, yet modern
shapes: Flat Cone, Bowl, Classic Cone, Classic T, T and Tzero. Each luminaire
has the option of a clear (PCC), translucent (PCTR) or frosted (PCF) bowl
(except Tzero, which is only available with a clear bowl). With an extensive
range of lumen packages, neutral white or warm white LED lights sources, and a
range of dedicated optics for lower mounting heights, it’s easy to select the
version that best suits the specific requirements of your project. All this
combined with a long life expectancy of 100,000 operating hours. In addition,
TownGuide Performer has a variety of control system options that can make this
luminaire an integral part of smart energy-reduction programs. This includes
LumiStep, DynaDimmer, and LineSwitch stand-alone dim control, and Coded Mains
group control, right up to seamless remote connectivity with Interact lighting
management software. Installation is easy. Thanks to the bayonet whistle
connector with integrated gland located in the spigot, there’s no need to open
the luminaire for installation. The Signify Service tag app offers direct
access to all relevant data, ensuring maintenance is easy too. Philips has
made every effort to make the Total Cost of Ownership (TCO) of the luminaire
as attractive as possible. And as TownGuide Performer is a dedicated LED
luminaire, compatible with a variety of control systems, there are significant
energy and maintenance cost savings compared with conventional lighting.
Product data
General Information
- Lamp family code LED50 [LED module 5000 lm]
- Light source replaceable Yes
- Number of gear units 1 unit
- Driver included Yes
- Light source engine type LED
- Service tag Yes
- Product family code BDP103 [TOWNGUIDE PERF CLASSIC T]
- Lighting Technology LED
- Value ladder Performance
- Serviceability class Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts
Light Technical
- Upward light output ratio 3
- Luminous Flux 3,800 lm
- Standard tilt angle post top 0°
- Standard tilt angle side entry –
- Luminous Efficacy (rated) (Nom) 112 lm/W
- Correlated Color Temperature (Nom) 4000 K
- Color rendering index (CRI) 70
- Light source color 740 neutral white
- Optical cover type Polycarbonate bowl/cover clear
- Luminaire light beam spread 75°
- Optic type outdoor Distribution symmetrical
Operating and Electrical
- Input Voltage 220-240 V
- Line Frequency 50 to 60 Hz
- Inrush current 45 A
- Inrush time 0.285 ms
- Power Consumption 34 W
- Power Factor (Fraction) 0.96
- Connection Screw connection block 5-pole Cable –
- Number of products on MCB of 16 A type B 10
Temperature
- Ambient temperature range -40 to +35 °C
- Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit regulating with constant
- light output
- Control interface –
- Constant light output Yes
Mechanical and Housing
- Housing Material Aluminum
- Reflector material –
- Optic material Acrylate
- Optical cover material Polycarbonate
- Fixation material Steel
- Housing Color Black
- Mounting device Post-top for diameter 76 mm
- Optical cover shape Wide
- Optical cover finish Clear
- Overall height 458 mm
- Overall diameter 570 mm
- Effective projected area 0.093 m²
Approval and Application
- Ingress protection code IP66 [Dust penetration-protected, jetproof]
- Mech. impact protection code IK10 [20 J vandal-resistant]
- Surge Protection (Common/Differential) Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
- Sustainability rating Lighting for circularity
- Protection class IEC Safety class II
- Flammability mark –
- CE mark Yes
- ENEC mark ENEC mark
- Warranty period 5 years
- EU RoHS compliant Yes
Initial Performance (IEC Compliant)
- Luminous flux tolerance +/-7%
- Initial chromaticity (0.43, 0.40) SDCM <5
- Power consumption tolerance +/-10%
- Init. Color Rendering Index Tolerance +/-2
- Standard Deviation of Colour Matching (McAdam ellipse)
- SDCM≤5
Over Time Performance (IEC Compliant)
- Control gear failure rate at median useful life 100000 h 10 %
- Lumen maintenance at median useful life* 100000 h 93
Application Conditions
- Performance ambient temperature Tq 25 °C
- Maximum dim level Not applicable
Product Data
- Order product name BDP103 LED50/740 II DS PCC BK CLO 76P
- Full product name BDP103 LED50/740 II DS PCC BK CLO 76P
- Full product code 871951465884400
- Order code 910925868808
- Material Nr. (12NC) 910925868808
- Numerator – Quantity Per Pack 1
- Net Weight (Piece) 7.380 kg
- EAN/UPC – Product/Case 8719514658844
- Numerator – Packs per outer box 1
- EAN/UPC – Case 8719514658844
Dimensional drawing
2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The information presented in this document is not intended as any
commercial offer and does not form part of any quotation or contract, unless
otherwise agreed by Signify. Philips and the Philips Shield Emblem are
registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, August 21 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>