RDP-JS26 Jig Saw

Product Information

Specifications

• Brand: RAIDER
• Model: RDP-JS25
• Power: 650W
• Voltage: 230V AC
• Frequency: 50Hz
• Stroke Rate: 500-3000 min-1
• Cutting Depth: 10mm
• Max Cutting Angle: 45°
• Weight: 80mm

Product Usage Instructions

1. Safety Precautions

Before using the RAIDER RDP-JS25 jig saw, it is important to
read and understand the following safety precautions:

• Always wear appropriate personal protective equipment (PPE)
  such as safety goggles and gloves.

• Make sure the power tool is disconnected from the power source
  before performing any maintenance or adjustments.

• Do not operate the jig saw if the power cord is damaged.
  Contact customer support for assistance.

• Avoid accidental starting by ensuring the switch is in the off
  position before connecting the power cord.

• Keep bystanders, especially children, away from the work
  area.

2. Assembly

To assemble the RAIDER RDP-JS25 jig saw, follow these steps:

1. Insert the blade into the blade holder and secure it using the
   blade clamp.

2. Adjust the base plate angle according to your desired cutting
   angle.

3. Attach the vacuum adapter if desired for dust extraction.

4. Connect the power cord to a suitable power outlet.

3. Operation

Follow these steps to operate the RAIDER RDP-JS25 jig saw:

1. Place the workpiece on a stable surface and ensure it is
   securely clamped.

2. Hold the jig saw firmly with both hands.

3. Position the blade near the starting point of the cut.

4. Switch on the power tool and gradually guide the blade along
   the cutting line.

5. Adjust the cutting speed and angle as necessary for different
   materials and cutting requirements.

4. Maintenance

To ensure optimal performance and longevity of the RAIDER
RDP-JS25 jig saw, follow these maintenance guidelines:

• Regularly clean the tool and remove any debris or dust from the
  blade and base plate.

• Inspect the power cord for any damage and replace if
  necessary.

• Check and tighten all screws and bolts to ensure they are
  secure.

• Apply a few drops of lubricating oil to the blade holder
  mechanism periodically.

Frequently Asked Questions (FAQ)

1. Can I use the RAIDER RDP-JS25 jig saw with a 220V power

supply?

No, the RAIDER RDP-JS25 jig saw is designed to operate on a 230V
AC power supply. Using it with a different voltage may damage the
tool and void the warranty.

2. How do I adjust the cutting angle of the jig saw?

To adjust the cutting angle, loosen the angle adjustment knob
located on the base plate, set it to the desired angle, and then
tighten the knob to secure the position.

3. Can I use the jig saw for cutting metal?

Yes, the RAIDER RDP-JS25 jig saw can be used for cutting various
materials including metal. However, it is recommended to use
appropriate blades suitable for metal cutting.

4. What is the maximum cutting depth of the jig saw?

The maximum cutting depth of the RAIDER RDP-JS25 jig saw is
10mm.

5. How do I change the blade of the jig saw?

To change the blade, first, disconnect the power tool from the
power source. Then, loosen the blade clamp, remove the old blade,
insert the new blade into the blade holder, and tighten the blade
clamp securely.

www.raider.bg

RAIDER POWER TOOLS 1

RAIDER PRO

jig saw ferestrau pendular ubodna testera h
nihajna vbodna zaga ubodna pila
RDP-JS25
USER’S MANUAL

Contents

2

BG

3

BG

9

EN instructions’ manual

14 RO instructiuni

19 MK 25 RU 30 RS uputstva za upotrebu 34 GR o 41 SLO originalna navodila za uporabo 46 HR originalne upute za rad

2 www.raider.bg

11 1
2

3

7

6

4

5

. 1. . 2. . 3. . 4. . 5. . 6. . 7. . 8. . 9. . 10. . 11. . , .

3

BG

,

– , – RAIDER. , RAIDER . 45 .
, , ” “.
, , . , , . ” ” , .
” ” RAIDER. . 1231, . ” ” 246, . +359 700 44 155, www.raider.bg; www.euromasterbg.com; e-mail: info@ euromasterbg.com.
2006 ISO 9001:2008 : , , , . Moody International Certification Ltd, England.

o

–
V AC Hz W
min-1 mm mm
O
–

RDP-JS25 230 50 650
500-3000 10 80
0 45 II

4 www.raider.bg
. . – , / . . 1. . 1.1. . . 1.2. , , . , . 1.3. , . , . 2. . 2.1. . . , . . 2.2. , . , , . , -. . . 2.3. , , . . , , . . 2.4. , Fi ( ), , 30 mA, ” 3 “. , . , , . 2.5. , Fi. . 3. . 3.1. , . , , . . 3.2. . , , , (), . 3.3. . , , «». , ,

5
, , , .
3.4. , , . , , .
3.5. . . – -, .
3.6. . . , . , , .
3.7. , , . , .
4. . 4.1. . . – -, . 4.2. , . , , . 4.3. , , , . . 4.4. , . , . , . 4.5. . , , , . , . . 4.6. . – -. 4.7. , , .., . , . . 5. . – RAIDER, . .

6 www.raider.bg
6. . 6.1. , . . 6.2. . . , . 6.3. – , . , . 6.4. (5) . , . 6.5. . . . 6.6. . . 6.7. , . , . 6.8. , , . . . . 6.9. . , , – , , . 6.10. , . . , . , . . . 7. . . . , , . -, . 8. . EN 60745. : LpA 83 dB(A); LwA 94 dB(A). K=3 dB. ! ( ) EN 60745: : ah=9.32 m/s2, K=1,5 m/s2, : ah=11 m/s2, K=1,5 m/s2. –

7
. , , , , . .
9. . 9.1. . U- . . . 9.2. . . . . . . (8) , . , , . (6). (6) , . , . . . , . , . 10. . , , , . / . , , , (, .). . . P2. 10.1. . (3). (3) ( ). . , . 11. . . 11.1. . (5) 45°. (10) (5). 0°, 22,5° 45° . (5) . . (10). 12. .

8 www.raider.bg
! , . , 230 V, 220 V.
13. . (2). (2) (1). (2). (2) , . (1) . 14. . – . , – . . – . – , – . – () . 0 – . , . I – , . II – . 15. . 15.1. . . , . . . . , . 15.2. . . , . (6) . (6). , RAIDER.
16. . ,
. ! 2002/96/EC , , .

72 www.raider.bg

www.raider.bg

EUROMASTER IMPORT EXPORT LTD
1231, Sofia, Bulgaria, 246 Lomsko shose Blvd., tel.: +359 2 934 33 33, 934 10 10 fax: + 359 2 934 07 27, 934 99 81
www.euromasterbg.com; e-mail: info@euromasterbg.com

References

• EUROMASTER Import Export LTD.
• EUROMASTER Import Export LTD.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>