ENFORCER 4K Network Video Recorder Instructions
- June 12, 2024
- ENFORCER
Table of Contents
4K Network Video Recorder
Instructions
SYSTEM UPGRADE
From this menu you can update the firmware with an update file from a USB drive.
UPGRADE BY USB
DRIVE
- If you have a firmware update file, save it to a USB drive, plug the drive into the NVR’s USB port.
- On the Upgrade menu, click Select File, choose the firmware file from the USB drive, and click OK.
- Click the Upgrade button. The firmware update process will start, and the NVR will reboot after the update is finished.
NOTE: The update may take 5-10 minutes. Do not power off the NVR or remove the USB from NVR during firmware upgrade.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>