Coolaroo 501051 Heavy-Duty Shade Fabric Builder’s Block Instruction Manual
- June 12, 2024
- Coolaroo
Table of Contents
HEAVY-DUTY
SHADE FABRIC
BUILDER’S BLOCK
INSTALLATION
INSTRUCTIONS
Congratulations on the purchase of your Coolaroo® Builder’s Block Shade Fabric. Please be sure to read the instructions before installing your fabric.
ADDITIONAL TOOLS NEEDED:
- Zip Ties
- Scissors (optional)
- Ladder (optional)
-
Unroll and unfold entire length of Builder’s Block Shade Fabric. Use scissors to cut to desired length if necessary.
-
Secure the edge of the fabric to the top of the fence with a zip tie. Ensure the bottom of the fabric is not dragging on the ground.
-
Pull on fabric to create tension and make sure there is no slack or wrinkles.
-
Add zip ties on top and bottom edge about 1 foot apart. Ensure that fabric is straight across the fence throughout the installation.
Fabric not recommended for use in strong storms or high winds.
MAINTENANCE:
Your Builder’s Block Shade Fabric has been made of the finest materials and, when properly cared for, will provide years of screening. To clean your fabric, simply rinse with a hose and allow to dry. Do not store fabric wet. Let fabric drycompletely before storing.
CAUTION: Do NOT attempt to install your Shade Fabric during windy conditions.
Questions or Comments? Contact us at:
GALE Pacific USA | www.coolaroousa.com |
1-800-560-4667
© by GALE Pacific Limited. All rights reserved. Coolaroo® s a registered
trademark of GALE Pacific Limited. Order
accessories online:
coolaroousa.com
0.00.000.000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>