HAMPTON BAY Merra HCF-1758-03-BNHD-1 3-Light Matte Black Vanity Light with Clear Glass Shade Instructions
- June 12, 2024
- HAMPTON BAY
Table of Contents
HAMPTON BAY Merra HCF-1758-03-BNHD-1 3-Light Matte Black Vanity Light
with Clear Glass Shade
Product Information
- Product Model: V20210392
- Product Name: Lamp
- Manufacturer: Unknown
- Rated Bulb Type: E26
- Maximum Bulb Wattage: 60W
- Number of Bulbs: 3 (bulbs not included)
Product Usage Instructions
- Prepare the wiring in your wall for the desired location of your new lamp. Ensure you have a junction box ready (not included).
- Unscrew the canopy nuts (F) and remove the mounting bracket (B) from the canopy (E). Connect the mounting bracket to your junction box using the mounting bolts (D).
- Make electrical connections using the wire nuts (A).
- Ensure that no wiring is left exposed. Place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the canopy bolts (C) and tightening them.
- Install three E26 bulbs (not included), up to 60W each, into the sockets.
- Unscrew the hanger bolts (J) from the hangers (I). Attach the hangers to the shades (H) and slide them up. Fit the hangers onto the lamp holders (G) and secure them by replacing and tightening the hanger bolts.
- Plug your lamp in, turn it on, and enjoy!
Please note that for a detailed version of these instructions, you can scan
the QR code using an appropriate app on your smartphone to obtain a .pdf copy.
If you have any further questions or need assistance, please contact us at
help@cs-supportpro.com. We are here to resolve your issues as soon as
possible.
INSTRUCTIONS
WARNING!
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy nuts (F) and take the mounting bracket (B) off the canopy (E). Connect your mounting bracket to your junction box using the mounting bolts (D).
- Make electrical connections using the wire nuts (A).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the canopy bolts (C) and retightening them.
- Install your bulbs into the sockets. This fixture has been rated for three E26 bulbs (not included) up to 60W each.
- Unscrew the hanger bolts (J) from the hangers (I). Attach the hangers to the shades (H) and slide them up. Fit the hangers onto the lamp holders (G) and secure them by replacing and retightening the hanger bolts.
- Plug your lamp in, turn it on, and enjoy!
CONTACT US
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and
we’ll resolve your issue ASAP! For a .pdf copy of the latest version of these
instructions, use the appropriate app on your smartphone to scan the QR code
to the right.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>