ZKTECO Horus TL1PRO 2.8-Inch Linux Visible Light User Guide
- June 12, 2024
- ZKTECO
Table of Contents
ZKTECO Horus TL1PRO 2.8-Inch Linux Visible Light
Components
Installation
Mounting on the wall
- Recommended height from the ground is 1.5m and can be adjusted according to the personnel average height.
- Fix the back plate onto the wall using wall mounting screws.
- Insert the device into back plate. (Plug the power cord into the power interface before installation.)
- Use security screws to fasten the device to back plate.
Power Connection
Recommended power supply:
- 12V ‡ 10%, at least 2000mA.
- Please use the supplied power adaptor.
Add User
When there is no super administrator set in the device, press to enter the main menu. After setting the super administrator, the system will request for the administrator’s verification before entering the menu. For the security purpose, it is recommended to register a super administrator at the first time you use the device.
Click to view the menu. Select [User Mgt.] and then add [New User]. Settings include user ID, name, user role, verification mode, face, password and user photo.
Configuring Wi-Fi
Click (Comm.] > [Wireless Network] to configuring Wi-Fi.
- When WIFI is enabled, tap the searched network. Enter the password, and tap Connect to
- WIFI (OK). The connection succeeds, with icon displayed on the status bar.
Attendance Search
When users verify successfully, attendance records are saved in the device.
This function
enables users to check attendance logs.
Click (Attendance Search] > (Attendance Record], enter User ID (if user ID
field is left blank, records of all users will be displayed) > select Time
Range, the corresponding attendance logs will be displayed.
Device Reset
-
a. Device power off and restart
Method 1: Click [System] > enter System settings interface. Press [Reset] to power off the device and restart.
Method 2 : Use tool
to press the Reset button on the bottom (slight click sound will be heard) for
3 seconds, then the device will power off and restart. -
b. Restore Factory Settings
Restore the device, such as communication settings and system settings, to factory settings (The registered user data won’t be deleted).
Use tool to press the Restore button on the bottom (slight click sound will be heard) for 3 seconds, then the device will power off and restart.
QR SCAN
Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
CONTACT
- Address: ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
- Phone: +86769-82109991
- Fax: +86 755 – 89602394
- www.zkteco.com
Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>