KitLock KL1O Mechanical Combination Lock Instruction Manual

June 12, 2024
KitLock

KitLock KL1O Mechanical Combination Lock

Product Information

SPECIAL NOTES
Please read carefully:

  • Before installing the lock, familiarise yourself with the installation and operating
  • The factory preset combination is 0-0-0-0.
  • Your KitLock is supplied ready to fit to doors up to 19mm (3/4”) thick.

Product Name: KL1O Private Function

Product Description
The KL1O Private Function is a KitLock that can be fitted to cabinets, cupboards, lockers, and other similar items. It can be used as a replacement for existing cam locks or easily installed on cupboards and cabinets without a locking device.

FITTING INSTRUCTIONS

The KitLock can be fitted to cabinets, cupboards and lockers etc. as a direct replacement for existing cam locks.It can also be fitted easily to cupboards and cabinets that do not have an existing locking device.

Fixing Pack A Default Supply

  • 1 KitLock
  • 3 Straight cam
  • 2 Hex nut
  • 4 Screw

Fixing Pack B Optional Additional Fixings

  • 1 Metal Clip
  • 3 Washer
  • 2 Screws
    • 4 Crank Cam

Product Usage Instructions

Installation Guide

  1. Replace existing cam lock with KitLock :
  2. Remove existing cam lock.
  3. Fit the KitLock to the door, passing the spindle through the existing hole.
  4. Secure the lock by threading the hex nut onto the spindle.
  5. Fit the cam and secure it with a screw.
  6. Check the operation of the lock using the factory preset combination 0-0-0-0.
  7. If the lock is functioning correctly, change the code using the instructions provided.
  8. New Installation (Optional Fixing Pack B may be required) :
  9. Mark a position at a suitable distance from the door edge, ensuring enough clearance for the cam to work.
  10. Using the “Typical Door Prep.” dimensions, drill a hole to suit.
  11. Continue installation from step 2 to 6 of the previous section.

Changing the Code

  1. With the indicator in the open position, turn the dials to the factory preset combination 0-0-0-0.
    Note: If you have already changed the code, use your current combination for this step.

  2. Depress the Reset Button fully and hold, turn the dials to your desired combination.
    Note: Do not let go of the Reset Button while setting your combination.

  3. Release the Reset Button after checking your combination is correct.
    NOTE : The outer casing will turn freely between the open and locked position until the combination has been scrambled.

How to Use Your Lock

  1. Once you have chosen and set your combination, turn the outer casing so the indicator is in the locked position.
  2. Make a note of your chosen combination and scramble the dials. The lock is now locked.
  3. To reopen, rotate the dials to your chosen combination and turn the outer casing so the indicator is in the open position.
    Note : Your chosen combination will continue to operate the lock until it is changed.

Finding the Code

Note : This function requires the Code Finding Key (sold separately).

  1. Insert the Code Finding Key when the indicator is in the locked position.
  2. Turn the key clockwise 90 degrees.
  3. Gently rotate each dial upwards until it stops. This is your code.
  4. Turn the key anticlockwise 90 degrees and remove.

Dimensions

KL10

  • 58mm (2 5/16″)
  • 62mm (2 1/2″)
  • 24mm (15/16″)
  • 52mm (2 1/16″)
  • 25mm (1″)

Typical Door Prep

  • 19mm (3/4″) min.
  • 18mm (11/16″) max.
  • 16mm (5/8″) min.

Contact Information

Helpline, service & spares

  • Helpline, service & spares (UK)
  • Helpline, service & spares (EU)
  • Helpline, service & spares (US)
  • Helpline, service & spares (Australia)

IOI-KL10PR-v1-0523 © 2023 Codelocks Ltd. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals