Synology RT6600ax dual-band Gigabit Wi-Fi router Installation Guide

Synology RT6600ax dual-band Gigabit Wi-Fi router

Before You Start

Thank you for purchasing this Synology product! Before setting up your new expansion unit, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your expansion unit.

Note: All images below are for illustrative purposes only, and may differ from the actual product.

Package Contents

**Synology RT6600ax at a Glance

**

1

| USB 3.2 Gen 1

(Type-A) Port

| ****

Rear Panel

| Connect an external drive, USB printer, or other types of USB devices here.

2

| ****

WAN Port

| Connect a network cable from the ISP modem into this port to establish WAN connection.

3

| ****

2.5G WAN/LAN Port

| 1. Connect a network cable from the ISP modem into this port to establish WAN connection.

2. Connect network cables into these ports to establish LAN connection.

4

| ****

LAN Port

| Connect network cables into these ports to establish LAN connection.
5| Power Button| Press to power on/off the Synology Router.

6

| ****

RESET Button

| Press and hold for four seconds (Soft Reset) or for ten seconds (Hard Reset).
7| Power Port| Connect the AC power adapter here.
8| LAN Indicator| ****

Front Panel

| Displays the status of LAN connection.
9| WAN Indicator| Displays the status of WAN connection.
10| Wi-Fi Indicator| Displays the status of Wi-Fi connection.
11| STATUS Indicator| Displays the status of the system.
12| WPS Button| ****

Right Panel

| Press to start WPS.
13| Wi-Fi Button| Press for three seconds to turn on/off the Wi-Fi network.

LED Indicator Table

Status Indicator

| ****

Green

| Static| Powered on
Blinking| System Ready

Orange

| Static| System booting/Rebooting/Hard Reset
Blinking| Mesh network disconnected
Green/Orange| Blinking| Searching device
Off| Powered off

Wi-Fi

| ****

Green

| Static| Wi-Fi active
Blinking| WPS connecting
Off| No Wi-Fi

WAN

| ****

Green

| Static| Network connected
Blinking| Data transmitting
Off| Network disconnected

LAN 1

| ****

Green

| Static| Gigabit/2.5G connection
Blinking| Gigabit/2.5G data transmitting

Orange

| Static| 10/100 Mbps connection
Blinking| 10/100 Mbps data transmitting
Off| No network

LAN 2-4

| ****

Green

| Static| Gigabit connection
Blinking| Gigabit data transmitting

Orange

| Static| 10/100 Mbps connection
Blinking| 10/100 Mbps data transmitting
Off| No network

Hardware Specification

WAN Port

| •  Gigabit WAN x 1

•  Gigabit WAN x 1 and 2.5G WAN x 1 (Dual WAN)

LAN Ports

| •  Gigabit LAN x 3 and 2.5G LAN x 1

•  Gigabit LAN x 3 (Dual WAN)

Size (H x W x D) (mm)| 175 x 320 x 200 (antennas in upright position)
Weight (kg)| 1.6 kg
Supported Clients (for SRM management)| •  Windows 7 onwards

•  Mac OS 10.12 onwards

File Systems| External: EXT4, EXT3, FAT, NTFS, HFS+

Wireless Standards

| •                                                    2.4GHz: 802.11 b/g/n/ax

•                                                     5GHz: 802.11 a/n/ac/ax

Operating Frequency Range

| •  802.11ax (2.4GHz): Up to 600 Mbps

•  802.11ax (5GHz-1): Up to 4800 Mbps

•  802.11ax (5GHz-2): Up to 1200 Mbps

Wireless Operation Modes

| •  Wireless Router

•  Wireless AP (Access Point)

Wireless Security

| •  64/128-bit WEP • WPS support

•  WPA2-Personal • WPA/WPA2-Personal

•  WPA2-Enterprise • WPA/WPA2-Enterprise

•  Opportunistic Wireless Encryption (OWE)

•  WPA3-Personal • WPA3-Enterprise

•  WPA2/WPA3-Personal

Antennas

| •  2T2R Omni-directional high-gain dipole (2.4GHz/5GHz-2)

•  4T4R Omni-directional high-gain dipole (5GHz-1)

Buttons & Switches| •  Power • WPS • Wi-Fi On/Off • Reset

Language Localization

| ****

Environment Requirements

| •  Line voltage: 100V to 240V AC

•  Frequency: 50/60Hz

•  Operating Temperature: 40 to 104˚F (5 to 40˚C)

•  Storage Temperature: -5 to 140˚F (-20 to 60˚C)

•  Relative Humidity: 5% to 95% RH

Safety Instructions

|

Keep away from direct sunlight and away from chemicals. Ensure a stable environment with no abrupt changes in temperature or humidity.

---|---

| ****

Place the unit right side up at all times.

|

Keep the unit away from liquids.

|

Before cleaning, unplug the power cord. Do not use chemical or aerosol cleaners. Wipe with damp paper towels.

| ****

To prevent the unit from falling over, do not place it on carts or any unstable surfaces.

| ****

The power cord must plug into the correct supply voltage. Ensure the supplied AC voltage is correct and stable.

|

Warning, electric shock hazard. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

| ****

Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries appropriately.

****| ****

The power cord must be plugged into a socket outlet with earthing connection.

| ****

Keep body parts away from the moving fan.

|

This product must be installed by qualified personnel in a restricted access location (like

dedicated equipment rooms, service closets).

Hardware Setup

Adjust Antennas

For optimal Wi-Fi performance, tilt the antennas so that they are at a 90-degree angle to the surface.

Position Your RT6600ax

For optimal performance, it is recommended to position your RT6600ax as advised below:

• On a stable surface (e.g. an elevated shelf) away from any possible physical interruptions.
• Close to the center of the area where the wired/wireless client devices are placed, and within a visible distance from the wireless devices.
• In a position where few walls and ceilings are between your RT6600ax and its client devices.
• Away from any potential electrical signal sources, such as other Wi-Fi routers, 3G/4G bases, and microwave ovens.
• Away from large expanses of metal or other materials, such as metal doors, glass panels, and concrete.

Connect to Your RT6600ax

• 1 Use the included network cable to connect your RT6600ax (at the WAN1 port) to the ISP modem. Connect one end of the power adapter to the power port on your RT6600ax, and the other end to the power outlet. Press the power button to power on your RT6600ax. Wait for up to two minutes until the STATUS and WAN LED indicators turn green.
• Connect wireless client devices to your RT6600ax. When the Wi-Fi indicator has turned static green, RT6600ax is ready to connect with other devices. Use your wireless device to scan and join the Wi-Fi network created by your RT6600ax.

Note:

The default credentials for the Wi-Fi network:

• Wi-Fi SSID: Synology_(Serial)
• Password: Synology

You can change it during the initial SRM setup.

• Connect wired client devices to your RT6600ax. Use network cables to connect devices to the LAN ports. The corresponding LAN LED indicators should turn orange/green to indicate a successful connection.

Mount Your RT6600ax

• Do not install the device in an unstable location, such as on an unsteady table or an inclined surface.
• Do not place another hub or object that generates heat on top of this unit.
• Please route all cables properly to prevent people from tripping over them.
• Ensure the air vents on the product are not blocked by other equipment or walls.
• Only use the power cable included with the product. Using other power cables may result in damage or fire.
• Use 2 screws (not included) with the dimensions shown below.
• The screw head should project out from the wall at 7mm.

Set up Synology Router Manager (SRM)

1. Use a computer or wireless device connected to your RT6600ax’s local network. If you use a wireless device, scan and join the Wi-Fi network (SSID: Synology_(Serial); Password: Synology).
2. Open a web browser, and enter either URL into the address bar:
   • http://router.synology.com
   • http://192.168.1.1:8000
3. Once connected, click Start to launch the SRM Setup Wizard.
4. Fill in the information to set up the administrator account. Click Next to continue.
5. 5 Fill in the information to set up the Wi-Fi network. Click Next to continue.
6. Set up the operation mode. When choosing the Wireless Router mode, you can also enable External access to SRM so that only external access via the HTTP(S) port (e.g. 8000/8001) can reach SRM.
7. Choose an Internet connection type:
   • PPPoE: Choose this option if you have obtained PPPoE credentials from the ISP.
   • Manual IP: Choose this option if you have obtained an available IP address for use.
   • Auto IP: Choose this option if you rely on an ISP modem for automatic IP assignment.
8. The wizard will continue to set up your RT6600ax, and it may take up to three minutes to complete the setup.
9. After the setup is complete, click Start managing now to enjoy SRM and its various features.

Note:

1. Above is a general demonstration of the SRM setup steps. The steps and available options may somewhat vary depending on your device type (e.g. PC or wireless device), access type (LAN, WAN, or Wireless LAN), and chosen operation mode (Wireless Router or Wireless AP).
2. If the setup is to be completed with a wireless device, remember to download a DS router to manage your RT6600ax from anywhere.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 23cm between the radiator & your body.

Note: The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products marketed in the US must be fixed to US operation channels only.

FCC regulations restrict the operation of this device to indoor use only.

Industry Canada statement:

This device complies with ISED’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution:

1. the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated.

Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body.

RED Compliance Statement

Compliance with 2014/53/EU Radio Equipment Directive (RED)

In accordance with Article 10.8(a) and 10.8(b) of the RED, the following table provides information on the frequency bands used and the maximum RF transmit power of the product for sale in the EU:

This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

| AT| BE| BG| HR| CY| CZ| DK|
---|---|---|---|---|---|---|---|---
EE| FI| FR| DE| EL| HU| IE|
IT| LV| LT| LU| MT| NL| PL|
PT| RO| SK| SI| ES| SE| UK| UK(NI)

This device is restricted to indoor use

FREQUENTLY ASKED QUESTIONS

What is the Synology RT6600ax dual-band Gigabit Wi-Fi router?

The Synology RT6600ax is a router designed to provide dual-band (2.4GHz and 5GHz) Wi-Fi connectivity with Gigabit speeds.

What are the key features of the Synology RT6600ax router?

Some key features of the Synology RT6600ax router include MU-MIMO technology, advanced parental controls, VPN support, built-in security features, and easy setup through the Synology Router Manager (SRM) interface.

What is MU-MIMO technology?

MU-MIMO (Multi-User Multiple Input Multiple Output) technology enables the router to communicate with multiple devices simultaneously, improving overall Wi-Fi performance in a multi-device environment.

Can the Synology RT6600ax router be used with both wired and wireless connections?

Yes, the router supports both wired connections through its Gigabit Ethernet ports and wireless connections through its dual-band Wi-Fi capability.

What is the maximum Wi-Fi speed supported by the Synology RT6600ax router?

The router supports the latest Wi-Fi 6 (802.11ax) standard and can provide speeds of up to 6600Mbps, depending on the capabilities of the connected devices.

Does the Synology RT6600ax router have USB ports for connecting external devices?

Yes, the router is equipped with USB 3.2 Gen 1 ports, allowing you to connect external storage devices or printers to the network.

Can the Synology RT6600ax router be used as a network-attached storage (NAS) device?

No, the Synology RT6600ax router is primarily designed as a Wi-Fi router and does not have the extensive NAS features found in dedicated Synology NAS devices.

What kind of security features does the Synology RT6600ax router offer?

The router includes features such as WPA3 encryption, firewall protection, and automatic firmware updates to help ensure network security.

Can I use the Synology RT6600ax router to set up a virtual private network (VPN)?

Yes, the router supports VPN pass-through and can also function as a VPN server, allowing you to securely access your home network from remote locations.

Does the Synology RT6600ax router support guest networks?

Yes, the router supports the creation of guest networks, allowing you to provide internet access to visitors without giving them access to your main network.

What is the range of the Synology RT6600ax router?

The range of the router can vary depending on environmental factors, but it is designed to provide a strong signal over a typical home or small office space.

Can the Synology RT6600ax router prioritize certain devices or applications for better performance?

Yes, the router supports Quality of Service (QoS) settings, which allow you to prioritize specific devices or applications to ensure they receive optimal network performance.

Does the Synology RT6600ax router support IPv6?

Yes, the router supports IPv6, the latest version of the internet protocol, which provides a larger address space and improved network efficiency.

Can I control and manage the Synology RT6600ax router remotely?

Yes, Synology offers a mobile app called DS router, which allows you to control and manage your router settings from your smartphone or tablet.

What kind of parental control features does the Synology RT6600ax router provide?

The router offers advanced parental controls, including website filtering, scheduling internet access for specific devices, and monitoring online activities.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:Synology RT6600ax dual-band Gigabit Wi-Fi router Installation Guide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>