CANOPIA 3×5 / 1×1.5 Door Awning 1500 Instruction Manual

CANOPIA 3×5 / 1×1.5 Door Awning 1500

Product Information

The product is a door awning manufactured by Canopia, a member of Palram Industries Ltd. The product is designed with a registered design and is recyclable. The product complies with EN 14963:200.The manufacturer provides after-sales service through a self-service form available on their website or by scanning the QR code.

Product Usage Instructions

Before starting assembly, it is important to read the instructions carefully, which can be found on the manufacturer’s website. The manufacturer also provides a video tutorial on how to assemble the product, which can be accessed via a QR code or a direct link on their website. If you need assistance with assembling the product or require a replacement part, you can contact the manufacturer’s customer support team through the contact details provided in the manual. For general questions, you can also visit the manufacturer’s website and fill out their online contact form.

HOW TO ASSEMBLE VIDEO

4 WAYS TO WATCH OUR VIDEO

1. Scan QR Code
2. Search on YouTube
3. Go to
4. Visit us

AFTER-SALES SERVICE
Our self-service form makes it convenient and fast. Go to the URL below or scan the QR code with your phone to submit you request.

Missing a part or need a new one?
canopia. shop/part_request

Need help to assemble your product?
canopia. shop/support

CUSTOMER SUPPORT

WE ARE HERE TO HELP
For general questions: canopia.com/contact-us

• USA 877-627-8476 generalsupport@poly-tex.com
• GERMANY 0180-522-8778 customer.serviceDE@palram.com
• CANADA 905-5646007 sales@footprintproducts.com
• SOUTH AFRICA 011-397-7771 receptionza@palram.com
• SWITZERLAND 062-287-33-77 info@ritter.ch

DOOR AWNING  INFORMATION

SAFETY ADVICE

• It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps.
• We strongly recommend using work gloves during panel sliding.
• Some parts may have sharp edges. Please be careful when handling components.
• Always wear shoes and safety goggles when working with extruded aluminium.
• If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
• Keep children away from the assembly area.
• Do not touch overhead power cables with the aluminium profiles .
• Do not attempt to assemble the product in windy or wet conditions.
• Dispose of all plastic bags. Keep them out of reach of small children.
• Do not climb or stand the roof.
• Do not hang or lay the profiles.
• Do not position your product in an area exposed to excessive winds .
• Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
• Make sure there are no hidden pipes or cables in the wall before inserting the pegs.
• This product is designed to be used mainly as a Door Awning.
• Heavy snow load on the roof can make it unsafe to stand below or nearby.
• The wall anchoring kit supplied with this product is suitable for concrete or solidbrick walls. Other wall types need an accordant wall fixation kit.

CARE & MAINTENANCE

• When your product needs to be cleaned, use a mild detergent solution and rinse with cold clean water.
• DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels.
• Clean the product once assembly is complete .

TOOLS & EQUIPMENT

BEFORE ASSEMBLY

1. Selecting a site:
   • Choose your site carefully before beginning assembly.
   • Consider the door’s opening – inside or outside.
   • The product must be positioned and fixed on a flat level surface.
2. This is a multi-part assembly best achieved by two people. Allow at least half a day for the assembly process.
3. Take all components & parts out of the packages. Sort the parts and check against the content parts list.
4. Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost.
5. Please note multi-sided profiles are used in this Door Awning. As a result some holes in the profiles are not used during assembly.
6. Please review entire instructions before starting. Carry out the assembly steps in exact order.
7. Please consult your local authorities if any permits are required prior to constructing the product.

IMPORTANT

• During assembly use a soft surface below the parts to avoid scratches and damages .
• You are solely responsible for determining whether the handling, storage, assembly, installation or use of this product is safe and appropriate in any location or for any given application.
• The manufacturer is not responsible for any damages or injury to you, any other person or any property resulting from the improper handling, storage, installation, assembly or use of this product, or the failure to follow the manufacturer’s written instructions regarding the handling, storage, installation, assembly and use of this product .
• This product is intended for normal residential use only. Do not use this product for any application that is not recommended in these instructions or building codes in effect in location where this product will be used. Always take care and use appropriate safety equipment (including eye protection) when assembling or installing this product.

DURING ASSEMBLY

• During assembly, you will encounter different icons for different products. Please see below for more information
• When encountering this information icon during assembly, please refer to the relevant assembly step for important additional comments.
• Step 5: Peel the film covering the panel.Be careful not to scratch the panel from this step onwards!
• You may use silicone lubricant spray on the frame in order to help you slide the panels into the profiles. Do not spray the panels.
• Use a rubber mallet if necessary.
• Make sure you remove covering plastic film from both sides of the panel.
• All panels with the stamped words “THIS SIDE OUT” must be facing out to create full UV protection. Remove plastic sticker as panels are locked in place
• Steps marked with dashed outlines refer to Extensions only.
• Some of the steps are irrelevant for an assembly of a single product.
• When assembling a single or an extended product, some parts may be surplus.
• These 2 icons below indicate if screw’s tightening is required or not.
• Temporary tightening of a few screws may be needed to prevent a profile from sliding out.
• Tighten all screws once assembly is completed.

Pal ram Canopia Ltd (Company number: 512106824) whose registered office is at Teradion Industrial Park, M.P Misgav20174, Israel (“Canopia”) warrants that the product will be free from defects in material or workmanship for a period of 3 years from the original date of purchase subject to the definitions, terms and conditions contained in this warranty.

REQUIRED TOOLS

INSTRUCTIONS

HOW TO FIX

Conditions

1. This warranty shall be valid only if the product is installed, cleaned, handled and maintained in accordance with Canopia’s written recommendations (Recommended Use: Hobby Gardening).
2. Without derogating from the above, damage caused by use of force, incorrect handling, inappropriate use, neglectful use or assembly or maintenance, accidents, impact from foreign objects, vandalism, pollutants, alteration, painting, connecting, gluing, sealing not in accordance with the user’s manual, or damage resulting from cleaning with incompatible detergents and minor deviations of  the product are not covered by this warranty.
3. This warranty does not apply to damage resulting from “force majeure”, which includes but is not limited to, hail, storm, tornado, hurricane, blizzard, flood, fire effects.
4. This warranty Is void if structural parts and components used are not compatible with Canopia’s written recommendations.
5. This Warranty applies only to the original purchaser of the product. It does not extend to any other purchaser or user of the product (including, but not limited to, any person who acquires the product from the original purchaser).
6. Any other use for any other purpose is under user’s sole responsibility. Canopia disclaims and assumes no liability for any use not recommended by this warranty.

Claims and Notifications

1. Every warranty claim must be notified in writing to Canopia within 30 days after the discovery of the defective product, enclosing the original sales receipt and this warranty.
2. The claimant must allow Canopia to inspect the product involved and the installation site itself while the product is still in its original position and has not been removed or moved or altered in any way and/or return the product to Canopia for testing.
3. Canopia reserves the right to investigate independently the cause of any failure.

Compensation

1. If a claim under this Warranty is properly notified and approved by Canopia, the purchaser, at Canopia’s option, may either (a) purchase a replacement product or part/s; or (b) receive refund of the original product or part/s purchase price, all in accordance with the following schedule:
2. For avoidance of any doubt, calculation for determination regarding compensation for defective part/s, according to the schedule above, will be based on the contribution of the defective part to the original cost of the product. Canopia reserves the right to provide substitutions if the product or any part of it is unavailable or obsolete.
3. This warranty does not cover any costs and expenses of removal and installation of the product or taxes or shipping cost or any other direct or indirect loss(es) which may result from the product failure.

General Conditions and Limitations

1. OTHER THAN HAS BEEN SPECIFICALLY STATED IN THIS WARRANTY, ALL OTHER WARRANTIES, WHITHER EXPRESS OR IMPLIED, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PRTICULAR PURPOSE ARE EXCLUDED SO FAR AS THE LAW PERMITS.
2. EXCEPT WHERE WE HAVE SPECIFICALLY STATED IN THIS WARRANTY, CANOPIA SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES THE PURCHASER SUFFERS DIRECTLY, INDIRECTLY, OR AS A CONSEQUENCE OF USING, OR IN ANY OTHER WAY CONNECTED TO THE PRODUCT.
3. IF CANOPIA IS PROHIBITED UNDER ANY APPLICABLE LAW FROM EXCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN RELATION TO THE PRODUCT, THE DURATION OF ALL SUCH IMPLIED WARRANTIES IS EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY OR, IF LONGER, THE MAXIMUM PERIOD REQUIRED BY APPLICABLE LAW.
4. THE PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING WHITHER THE HANDLING, STORAGE, ASSEMBLY, INSTALLATION OR USEOF THE PRODUCT IS SAFE AND APPROPRIATE IN ANY LOCATION, FOR ANY GIVEN APPLICATION OR IN ANY GIVEN CIRCUMSTANCE. CANO PIA IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURY TO THE PURCHASER, ANY OTHER PERSON OR ANY PROPERTY RESULTING FROM THE IMPROPER HANDLING, STORAGE, INSTALLATION, ASSEMBLY OR USEOF THE PRODUCT OR THE FAILURE TO FOLLOW THE WRITTEN INSTRUCTIONS REGARDING THE HANDLING, STORAGE, INSTALLATION, ASSEMBLY AND USEOF THE PRODUCT.
5. UNLESS OTHERWISE EXPRESSLY INDICATED BY CANOPIA, THE PRODUCT IS INTENDED FOR NORMAL RESIDENTIAL AND COMMERCIAL USE ONLY. CANO PIA IS NOT RESPONSIBLE FOR ANY LOSS, DAMAGE, COST OR EXPENSE RESULTING FROM ANY USE OF THE PRODUCT FOR ANY PURPOSE THAT IS NOT RECOMMENDED BY THE WRITTEN INSTRUCTIONS OR THAT IS NOT PERMITTED BY ANY APPLICABLE LEGISLATION OR OTHER CODES IN EFFECT IN THE LOCATION WHERE THE PURCHASER WILL USE THE PRODUCT.
6. PLEASE NOTE: ANCHORING THIS PRODUCT TO THE GROUND IS ESSENTIAL TO ITS STABILITY AND RIGIDITY. IT IS REQUIRED TO COMPLETE THIS STAGE IN ORDER YOUR WARRANTY TO BE VALID.

Declaration of Performance
According to Construction Products Council Directive UE N°305/2011 and EN 14963:2006 Issue Date 01/01/2022

1.  Identification code: Nancy™ / Louisa™, refer to CE label no 004
2. Type: A light transmitting wall-supported 4 mm thickness solid PMMA extruded sheets structure made of aluminum and galvanized steel elements
3. Intended use: open multi-purpose covering
4. Manufacturer: Palram Canopia Ltd. Teradion Industrial Park, M.P Misgav 2017400, P.O.B. 53, Israel
5. Importer and EU representative : PALRAM Applications UK, Unit 40 J3 Industrial Estate Carr Hill, Doncaster DN4 8DE
6. Assessment and verification of constancy of performance: System 3
7. Declared performance

• Resistance to upward load
  UL 1200

• Resistance to downward load
   DL 1200

• Reaction to fire
   B, s1, do For mounting and fixing provisions see EN 16153:2013

• Resistance to fire
  NPD

• External fire performance
  FROoF

• Water tightness
  For the rooflight with upstand
   Pass
  For the sheet material
  Pass

• Impact resistance
  For the small hard body
  Pass
  For the large soft body
  NPD

• Thermal transmittance
  For the rooflight
  NPD (not relevant to an open multi purpose cover)
  For the sheet material
   5.86 W/(m2-K)

• Direct airborne sound insulation
  NPD (not relevant to an open multi purpose cover)

• Radiation transmittance
  Light transmittance: Tv – 93.0 %
  Solar direct transmittance: Te – 81.83 %6
  Solar factor: g value – 0.85

• Air permeability
  For the rooflight
  NPD (not relevant to an open multi purpose cover)
  For the sheet material
  Pass

• Durability (of the sheet material)
  AA, Cu 1, Ku O
  The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point This declaration of performance is issued, in accordance with Annex ZA.2.2 – EN 14963:2006, under the sole responsibility of Palram Canopia Ltd. ITT reports and Factory Production Control records are available upon request at www.canopia.com

References

• Contact Us Archive - Canopia
• Parts Request - Canopia
• Support Archive - Canopia AU
• tex.com
• Inspection Systems for the Electronics Industry – Viscom – Viscom
• 50NRTH - Exklusive Produkte für Outdoor und Garten
• Αρχική Σελίδα - Alpaco Domica
• Canopia United Kingdom - Celebrate Outdoor Living
• YouTube
• Contact Us Archive - Canopia
• Nancy Door Awning Kits | Canopia by Palram
• Parts Request - Canopia UK

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>