Dainolite WLS-1410LEDW-MB Wilson LED Wall Sconce Instruction Manual
- June 12, 2024
- Dainolite
Table of Contents
WLS-1410LEDW-MB Wilson LED Wall Sconce
Product Information
The product name is WLS-1410LEDW. The product comes with a permanently installed LED bulb that does not need to be replaced. It has a power input of 120V and uses 2x 5W DC LED with a color temperature of 3000K and 800 Lumens. The product dimensions are 14.5368mm x 4.75120mm x 2.563mm. It has a black/noir L wire, a white/black N wire, and a red/rouge and green/vert wire.
Product Usage Instructions
For safe usage, the product must be installed in accordance withthe applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. The LED bulb generates some heat, so avoid touching it. Do nottry to modify the plug, cable, adapter, or LED bulb. Use a soft cloth when cleaning the lamp and avoid using chemical or abrasive cleaners. If the product needs repair or replacement, contact the factory directly via email at dainolite@dainolite.ca. Include a copy of your purchase invoice and describe the defect or missing hardware.
If a dimmer is required, use only the recommended dimmer models:
- LUTRON: MA-PRO-WH,
- LEGRAND: ADTH700RMTU,
- LUTRON: DVELV-300P,
- LUTRON: MAELV-600,
- LUTRON: DV-600P-WH-CSA.
Using any other dimmer will void the product’s warranty.
INSTALLATION INSTRUCTION
DIMENSION
Warning
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved.
IMPORTANT SAFETY INSTRUCTIONS
- The LED bulb has been permanently installed into this lamp. The LED bulb does not need to be replaced. Do no attempt to remove or replace the LED bulb.
- Although LED bulbs do not get as hot as traditional light bulbs, they still generate some heat. Avoid touching the LED bulb. Do not try to modify the plug, cable, adaptor or LED bulb.
- Use a soft cloth when cleaning the lamp. Do not use chemical or abrasive cleaners
- These important safety warnings do not cover all possible conditions or situations that may occur. Please take care when using this product.
Do Not Return the Product To The Retailer
For Warranty:
Contact the factory directly in writing: Email dainolite@dainolite.ca. Include a copy of your purchase invoice and describe the defect. A factory person will contact you directly to advise what further action will be taken.
For Missing Hardware or Broken Glass:
Contact the factory directly in writing: Email dainolite@dainolite.ca. The missing or broken parts will be shipped to you directly the same day after receipt of your email (weekend excluded).
CALIFORNIA PROPOSITION 65 WARNING – WARNING:
This may contain one or more chemicals known to the State of California to
cause cancer and birth defects or other reproductive harm. Wash hands after
handling.
DIMM ER
MODEL #: WLS-1410LEDW
This product may only be dimmed using dimmer models:
- LUTRON: MA-PRO-WH
- LEGRAND: ADTH700RMTU
Using any other dimmer will void this product’s warranty.
1401 Courtney Park Drive East,
Missisauga, Ontario,
Canada L5T 2E4
Tel: (905) 564 -1262
Fax: (905) 564 -1299
Email: dainolite@dainolite.ca
Web: dainolite.ca
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>