BERTOLINI E-960 BE Ladder Desk Instruction Manual

Assembly Instructions
LADDER DESK
ESTANTE
E-960 BE

E-960 BE Ladder Desk

Special Notes:

1. Examine carefully all parts of the furniture before starting the work.
2. It is recommended to assemble the furniture as this assembly manual, if in doubt contact the company.
3. The assembler has the responsibility of following the instructions of the Assembly Manual, which are essential to insure the furniture structure.

ASSEMBLY INSTRUCTIONS

IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR PRODUCT PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damage or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children. Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Factory advise you use the wall straps provided to further enhance the safety of this product.
PLEASE NOTE: THIS IS NOT A SOLID WOOD PRODUCT,BE CAREFUL TO RESPECT THE LIMIT OF EACH SCREW AND HARDWARE.
IF USED EXCESSIVE POWER IT CAN DAMAGE THE MATERIAL.

CARE & MAINTENANCE:

Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface Periodically check all screws & fixings to ensure they are secure. DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition. Keep any sharp objects away from the item.
This product is manufactured in particle board.
On unpacking the item you may notice an odour due to production processes but this will disappear after a period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature change.
It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water , detergents, aerosol sprays or any polish as use of these would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.

PART LIST

PLEASE NOTE:
All part list are identified with a NUMBER.

ATTENTION
Cleaning: use only a cloth moistened with water.

HARDWARE LIST

1
I| | Screw| 4
J| | Plastic Cap| 8

PLEASE NOTE:
All hardware are identified with LETTERS.
** You will need a small mallet and a screwdriver

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>