RASTAR 53800 1:18 Ferrari F1 Racing Simulation Electronic Vehicle Toy Instructions
- June 12, 2024
- RASTAR
Table of Contents
RASTAR 53800 1:18 Ferrari F1 Racing Simulation Electronic Vehicle Toy
Product Information and Usage Instructions
The product is a remote-controlled car that requires rechargeable batteries for its operation. The car comes with a user manual that contains important information on how to use and maintain the product properly. The product is available in different types, including 53800, 98500, 93300, and 93400.
Product Usage Instructions
-
For better preservation of rechargeable batteries, it is recommended to regularly recharge them using a charger of the same or equivalent type.
-
Do not dispose of batteries in fire. Dispose of them responsibly.
-
When the vehicle starts to lose power, refresh or recharge the batteries to maintain its functions and performance.
-
Do not operate the car on streets where people gather or under high voltage wires to ensure safety.
-
Do not drive the vehicle in sand, through water or snow.
-
Point the antenna of the remote control upward towards the car and control it within the effective range to avoid affecting the play effect.
-
Avoid putting the vehicle near heat or in direct sunlight. Always turn switches off after operating.
-
Remove the batteries when the unit is not in use for long periods of time. Clean the vehicle with a soft cloth and avoid being heated or exposed to strong sunlight. Keep dry.
-
Examine the toy regularly for any damage to its wires, plug,
enclosure, and other parts. Do not use the toy until the damage has been repaired. -
Keep the instruction manual since it contains important information.
Product Maintenance
The following are some maintenance tips for the product:
- Remove the batteries when the unit is not in use for long periods of time.
- Clean the vehicle with a soft cloth and avoid being heated or exposed to strong sunlight. Keep dry.
- Examine the toy regularly for any damage to its wires, plug, enclosure, and other parts. Do not use the toy until the damage has been repaired.
Product Specifications
- Frequency bands: 2400MHz to 2483.5MHz
- Maximum Transmitting Power (EIRP): Not more than 10mW
- Choking hazard: Small parts. Not for children under 3 years.
Product Manufacturer Information
The product is manufactured by RASTAR GROUP located at Xinghui Industrial Park, Xiadao Road, Shanghai, Chenghai, Shantou, Guangdong, China. For more information, visit their website at http://www.rastar.com
Operation Guide
-
Switch on the LED indicator.
-
The LED indicator blinks when the pairing process is in progress.
-
When the LED indicator goes out, the pairing process is completed.
-
The fixing piece for the chassis can be used to twist the lock of the battery cover. See picture 1.
-
Open the lid and put 3 X 1.5V AA batteries into the car according to its polarity.
-
Close the lid and twist the chassis piece to lock the battery cover.
-
Open the lid and put 2 X 1.5V AA batteries into the controller according to their polarity.
-
Close the lid and rotate the knob to lock the battery cover.
See picture 1. -
Before playing, the transmitter needs to pair with the model car as follows:
- The LED indicator on the transmitter will blink and be ready for pairing.
- Switch on the model car, and the LED on the transmitter will go out.
- This means the pairing process is completed, and the model car
can be fully controlled by the transmitter. See picture 3.
-
Adjust the direction adjustment switch to control the car running in a straight line.
-
Replace the battery when the LED indicator becomes dark, which means a low battery.
-
The speed of the model car will slow down when the battery is low. Replace it then.
-
The 2.4GHz transmitters are compatible with to control of several model cars at the same time without interference, provided that the pairing process is orderly done one by one following the above steps. That is, the first transmitter finishes pairing with the first model car and keeps its power on, then the second transmitter can begin to pair with second model car.
OPERATION GUIDE
- The fixing piece for chassis can be used to twist the lock of the battery cover, please see the picture on the right. See picture 1.
- Please open the lid and put 3 X 1.5V “AA” batteries into the car according to its polarity, then close the lid and twist the chassis piece to lock the battery cover.
- Please open the lid and put the 2 X 1.5V “AA” batteries into the controller according to its polarity, then close the lid and rotate the knob to lock the battery cover. See picture 1.
- Every time before playing, the transmitter needs to pair with the model car as follows:
- The LED indicator on the transmitter will blink and ready for pairing. Switch on the model car, the LED on the transmitter will go out. This means the pairing process is completed. Then the model car can be fully controlled by the transmitter.
See picture 3.
- Adjust the direction adjustment switch to control the car running in a straight line.
- Please replace battery when LED indicator becomes dark which means low battery.
- The speed of model car will slow down when battery is low. Please replace then.
- 2.4GHz transmitters are compatible to control several model cars at same time without interference, provided that the pairing process is orderly done one by one following above steps. That is, first transmitter finishes pairing with first model car and keep their power on, then second transmitter can begin to pair with second model car.
- Please turn off the model car after playing
FEATURES & FUNCTION
This product uses 2.4GHz communication technology, which is compatible for multi-device and multi-user, with fast response speed, high response precision, and strong anti-interference capability
CAUTION
- Different types of batteries or new and used batteries are not to be mixed. Exhausted batteries are to be removed from the toy.
- Batteries should be replaced by an adult. Batteries are to be inserted with the correct polarity. The supply terminals are not to be short-circuited.
- Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the toy before being charged.
- Rechargeable batteries are only to be charged under adult supervision. Leaked or broken batteries are not to be charged.
- Only batteries of the same or equivalent type are recommended to be used.
- Never put the batteries near fire or any source of heat, water or direct sunlight.
- Skin or clothing is to be washed immediately if you make contact with leaked liquid from the battery
- For better preservation of rechargeable batteries, please regularly recharge them, and only a charger of the same or equivalent type is recommended to be used.
- Dispose of batteries responsibly, do not dispose of in fire.
- When your vehicle starts to lose power, it may lose its functions or performance. This indicates that it’s time to refresh your batteries or recharge them
- Do not operate your car on the streets where people gather or under high voltage wires. Stay safe!
- Don’t drive your vehicle in sand, through water or snow.
- Point the antenna of the remote control upward to the car, and control the car within the effective range, so as not to affect the play effect.
- Don’t put your vehicle near heat or in direct sunlight. Always turn switches OFF after operating
- Picture for reference only, subject to actual product.
MAINTENANCE
- Remove the batteries when the unit is not in use for long periods of time.
- Clean the vehicle with a soft cloth.
- Avoid being heated or being exposed to strong sunlight.
- Keep dry.
- Remove the space regularly examine the toy for any damage to its wires, plug, enclosure and other parts and they must not be used until the damage has been repaired.
- This manual is applicable to the following types of product: 53800,98500, 93300,93400.
- Frequency bands: 2400MHz to 2483.5MHz
- Maximum Transmitting Power (EIRP) : Not more than 10mW.
- WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years
- The instruction has to be kept since it contains important information.
- RASTAR GROUP Add:Xinghui Industrial Park, Xiadao Road, Shanghua, Chenghai, Shantou, Guangdong, China.http://www.rastar.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>