YOLINK YS7A02 Smoke Alarm User Guide
- June 12, 2024
- YOLINK
Table of Contents
YS7A02 Smoke Alarm
User Guide
YS7A02 Smoke Alarm
Welcome!
Thank you for purchasing Yilin products! We appreciate you trusting Yilin for
your smart home & automation needs. Your 100% satisfaction is our goal. If you
experience any problems with your installation, with our products or if you
have any questions that this manual does not answer, please contact us right
away. See the Contact Us section for more info.
Thank you!
Eric Vans
Customer Experience Manager
User Guide Conventions
The following icons are used in this guide to convey specific types of
information: Very important information (can save you time!)
Before You Begin
Please note: this is a quick start guide, intended to get you started on the Installation of your Smoke Alarm. Download the full Installation & User Guide by scanning this QR code:
https://www.yosmart.com/support/YS7A02-UC/docs/instruction
Installation & User Guide
You can also find all guides and additional resources, such as videos and
troubleshooting instructions, Smoke Alarm Product Support Page by scanning the
QR code below or by visiting: https://shop.yosmart.com/pages/smoke-alarm-
product-support
https://shop.yosmart.com/pages/smoke-alarm-product-
support
Product Support Support
Your Smoke Alarm connects to the internet via a Yilin hub (Speaker Hub or the
original Yilin Hub), and it does not connect directly to your WiFi or local
network. In order for remote access to the device from the app, and for full
functionality, a hub is required. This guide assumes the Yilin app has been
installed on your smartphone, and a Yilin hub is installed and online (or your
location, apartment, condo, etcetera, is already served by a YoLink wireless
network).
In the Kit
Required Items
You may require these items: Get to Know Your Smoke Alarm
Communications Base
Get to Know Your Smoke Alarm, Cont.
LED Behaviors
| Blinking Red Once, then Green Once Device Start Up
---|---
| Blinking Red And Green Alternately Restoring to Factory Default Settings
| Blinking Green Connecting to the Cloud
| Fast Blinking Green Control-D2D Pairing in Progress
| Slow Blinking Green Updating
| Blinking Red Once Device is Connected to the Cloud and is Functioning
Normally
| Fast Blinking Red Control-D2D Unpairing in Progress
| Fast Blinking Red Every 30 Seconds Batteries Are Low; Replace the Batteries
Head LED & Sound Behaviors:
| 1 Yellow LED Flash 1 Chirp, 60 Second Pause Low Battery (Head Must be
Replaced)
---|---
| 2 Red LED Flash 2 Beeps, 60 Second Pause Trouble (Head Must be Replaced)
| 1 Yellow LED Flash 2 Chirps, 60 Second Pause Head End-of-Life (Head Must be
Replaced)
Power Up
Install the App
If you are new to YoLink, please install the app on your phone or tablet, if
you have not already. Otherwise, please proceed to the next section.
Scan the appropriate QR code below or find the “YoLink app” on the appropriate
app store.
http://apple.co/2Ltturu
Apple phone/tablet iOS 9.0 or higher
http://bit.ly/3bk29mv
Android phone or tablet 4.4 or higher
Open the app and tap Sign up for an account. You will be required to provide a
username and a password. Follow the instructions, to set up a new account.
Allow notifications, when prompted. You will immediately receive a welcome
email from [email protected] with some
helpful information. Please mark the yosmart.com domain as safe, to ensure you
receive important messages in the future.
Log in to the app using your new username and password. The app opens to the
Favorite screen. This is where your favorite devices and scenes will be shown.
You can organize your devices by room, in the Rooms screen, later.
Add Your Communication Base to the App
-
Tap Add Device (if shown) or tap the scanner icon:
-
Approve access to your phone’s camera, if requested. A viewfinder will be shown on the app.
-
Hold the phone over the QR code so that the code appears in the viewfinder.
If successful, the Add Device screen will be displayed.
You can change the device name and assign it to a room later. Tap Bind device.
If successful, the screen will appear as shown. Tap Done.
-
Confirm the device is noted as online per the figure above, before proceeding to the next section. Repeat the Power Up step, as needed.
Installation
Before physically installing the device, please review the guide included with the smoke head, in particular, location considerations. We suggest reviewing the full installation guide, as well. Please refer to the product support page for additional information. It is also recommended that you configure and test your Smoke Alarm prior to installing it.
- You must activate the head before installation. Depress the Activation Button on the head. This is a one-time button that remains depressed. Pressing this button activates the head and starts the End-of-Life timer, so do not press this button until you are ready to install the device.
- “Bench test” your new Smoke Alarm before installation. Twist the head into the base until it snaps in place and is not loose. Press the test button on the top of the head, until the alarm sounds and the LEDs flash. Check and confirm the alarm is displayed in the app, as well. Confirm this result before proceeding to the next step.
- Determine the appropriate location for your Smoke Alarm. Review the guide packaged with the head, as well as information in the full installation guide and the product support page.
- Remove the head from the base, as required. Secure the base to the ceiling or wall, using the two supplied screws and anchors, or using your own specialty anchors (e.g. toggle bolts or concrete anchors).
- Twist the head into the base.
- Test the device.
Refer to the full Installation & User Guide, to complete the setup of your
Smoke Alarm.
Contact Us
We are here for you, if you ever need any assistance installing, setting up
or using a Yilin app or product!
Need help? For fastest service, please email us 24/7 at
[email protected]
Or call us at 831-292-4831 (US phone
support hours: Monday – Friday, 9AM to 5PM Pacific)
You can also find additional support and ways to contact us at:
www.yosmart.com/support-and-service
Or scan the QR code:
http://www.yosmart.com/support-and-service
Finally, if you have any feedback or suggestions for us, please email us at
[email protected]
Thank you for trusting Yilin! Eric Manzo Customer Experience Manager
15375 Barranca Parkway
Ste. J-107 | Irvine, California 92618
© 2022 YOSMART, INC IRVINE,
CALIFORNIA
Documents / Resources
|
YOLINK YS7A02 Smoke
Alarm
[pdf] User Guide
YS7A02, AJ-732, YS7A02 Smoke Alarm, Smoke Alarm, Alarm
---|---