SONOFF DW2-WI-FI Magnetic Wireless Door Sensor Instruction Manual
- June 12, 2024
- SonOFF
Table of Contents
SONOFF TECHNOLOGIES CO., LTD.
Operation instruction
DW2-WI-FI Magnetic Wireless Door Sensor
-
Download the “eWeLink”APP
-
Install batteries
2-1. Remove the back cover of the transmitter.
2-2. Insert batteries into the battery compartm ent based
on identifiers of positive and negative poles.
2-3. Close the
back cover.
The battery is not included, please purchase it separately. -
Enter pairing mode Long press the pairing button on the transmitter for 5s with the eject pin until the LED indicator flashes, then the device enters the pairing mode.
-
Add the device
Tap “+” and select “Bluetooth connect”, then operate following the prompt on the APP.
Install the device
- Tear off the protective film of the 3M adhesive.
- Try to align the mark line on the magnet with that on the transmitter during installation.
- Install them in the opening and closing area separately.
Make sure the installation gap is less than 5mm when the door or the window is closed.
Specifications
| Model | DW2-Wi-Fi |
|---|---|
| Battery model | AAA 1.5V |
| Working voltage | DC3V (2 x 1.5V battery) |
| Quiescent current | ≤40uA |
| Emission current | ≤15mA |
| Wi-Fi | IEEE 802.11 b 2.4GHz |
| Operating systems | Android & iOS |
| Installation gap | <5mm |
| Working temperature | -10℃~40℃ |
| Material | PC |
| Dimension | Transmitter: 70x31x19mm |
Magnet: 42x14x16mm
Product Introduction
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
LED indicator status instruction
| Flashes | Bluetooth Pairing Mode |
|---|---|
| Flashes quickly once | Unable to discover the router |
| Flashes quickly twice | Connect to the router but fail to connect to Wi-Fi |
Features
DW2-Wi-Fi is a Wi-Fi wireless door/window transmitter which triggers the transmitter by separating the magnet for more than 20mm from the transmitter, then the transmitter will send an alarm message and pushes it to APP. You can share the device with your family to check the door/window status together.
|
---|---
Share Control| Alarm push notification
|
Historical operation records| Battery level
Application
Note:
- Do not install outside the door/window.
- Do not install in the unstable position or in the place exposed to rain or moisture.
- Do not install near wiring or magnetic object.
Replace batteries
SONOFF TECHNOLOGIES CO., LTD.
Documents / Resources
|
SONOFF DW2-WI-FI Magnetic Wireless Door
Sensor
[pdf] Instruction Manual
DW2-WI-FI Magnetic Wireless Door Sensor, DW2-WI-FI, Magnetic Wireless Door
Sensor, Wireless Door Sensor, Door Sensor, Sensor
---|---