energenie EG-PWC-PS500-01 Pure Sine Wave Power Inverter User Manual
- June 12, 2024
- energenie
Table of Contents
energenie EG-PWC-PS500-01 Pure Sine Wave Power Inverter
Pure sine wave power inverter 500 W
The EG-PWC-PS500-01 is a single socket 500 W car power inverter with pure sine wave output. It allows you to connect any AC powered electronics (max. 500 Watt), like notebooks, HiFi or video equipment, chargers of mobile phones / cameras, electrical tools etc. The inverter features integrated overload-, short-circuit and reverse polarity protection, plus a built-in cooling fan provide a stable power supply. It also has a LED status indicator and alarm buzzer.
Features
- Single socket 500 W car power inverter with pure sine wave output
- Allows to connect any AC powered electronics (max. 500 Watt)
- Integrated overload-, short-circuit and reverse polarity protection
- Built-in cooling fan
- LED status indicator and alarm buzzer
- Remote on/off switch (optional)
- USB power output: 5.0 V / 2.1 A
- 230 V AC (500 W, peak power 1000 W)
- Input voltage range: 10 V – 16 V
Usage Instructions
Before using the EG-PWC-PS500-01 inverter, ensure that the input voltage is within the range of 10 V – 16 V. Connect the inverter to your vehicle’s battery by attaching the red(+) cable to the positive terminal and the black(-) cable to the negative terminal.
Plug in the electronic device that you want to power into the inverter’s single socket. The device must not exceed 500 W of power consumption. The inverter provides a pure sine wave output, making it safe for use with sensitive electronics.
The inverter features integrated overload-, short-circuit and reverse polarity protection, which will protect your device in case of any electrical faults. The built-in cooling fan helps to keep the inverter cool during use.
The LED status indicator shows the current status of the inverter, while the alarm buzzer will sound if there is an issue with the inverter or connected device.
If you have the optional remote on/off switch, you can use it to turn the inverter on or off without having to physically access the inverter.
The inverter also has a USB power output, which provides 5.0 V / 2.1 A of power for charging mobile phones, cameras, and other USB-powered devices.
When not in use, disconnect the inverter from the vehicle’s battery to prevent any battery drainage.
Single socket 500 W car power inverter with pure sine wave output
Features
Single socket 500 W car power inverter with pure sine wave output
Allows to connect any AC powered electronics (max. 500 Watt), like notebooks,
HiFi or video equipment,chargers of mobile phones/cameras, electrical tools
etc.
Integrated overload-, short-circuit and reverse polarity protection, plus a
built-in cooling fan provide a stable power supply
LED status indicator and alarm buzzer
Specifications
- Input: 10 V – 16 V DC (accumulator directly)
- Output: 230 VAC ± 10 % at 50 Hz (± 1 Hz), pure sine wave, THD < 3 %, 92 % eciency
- Power output: 500 W continuous power (peak power 1000 W)
- Fuse: internal output overcurrent protection, 2.8 A
- USB power output: 5.0 V / 2.1 A
- Recommended operating temperature : + 0 °C ~ + 40 °C at 100 % load; up to 60 °C at 50 % load
- Material: aluminum and plastic
- Cable: 80 cm (6 mm) ring terminals, 60 A terminal
- Dimensions: 210 mm x 150 mm x 70 mm
- Net weight: 1.95 kg
INSTRUCTION
Declaration of conformity
This product is tested and complies with the essential requirements of the
laws of member states concerning LVD(2014/35/EU),EMC(2014/30/EU), RoHS
(2011/65/EU). The CE declaration canbe found under
www.gmb.nl/certificates
Waste disposal: The crossed out wheelie bin symbol means that this product shall not be disposed of with normal household waste. Electronic and Electrical Equipment not included inthe selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances. Please dispose of responsibly at an approved wasteor recycling facility
WARRANTY CONDITIONS
The receipt must clearly list the date of purchase and the part number, in addition it should be printed. Keep the receipt for the entire warranty period since it is required for all warranty claims. During the warranty period the defective items will be credited, repaired or replaced at the manufacturer’s expense. Work carried out under the warranty neither extends the warranty period nor starts a new warranty period. The manufacturer reserves the right to void any warranty claim for damages or defects due to misuse, abuse or external impact (falling down, impact, ingress of water, dust, contamination or break). Wearing parts (e.g. rechargeable batteries) are excluded from the warranty. Upon receipt of the RMA goods, Gembird Europe B.V. reserves the right to choose between replacement of defective goods or issuing a credit note. The credit note amount will always be calculated on the basis of the current market value of the defective products. Gembird Europe B.V. Wittevrouwen 56, 1358CD Almere, The Netherlands www.gembird.nl/service [email protected]
All brands and logos are registered trademarks of their respective owners.
References
- gembird-support.de
- Gembird
- Service
- Gembird - world leader in the production of computer hardware
- Service