Peytec RMTS-XT-MP- 004 MuckPuck Tracking Device User Manual
- June 6, 2024
- Peytec
Table of Contents
MuckPuck™
USER
MANUAL
Overview:
The MuckPuck™ is a ruggedized tracking device mainly used to track assets and inventory in harsh environments.
Operation Procedure:
-
To turn on the device a magnet needs to come close or in contact with the MuckPuck™ enclosure.
Please note, the magnetic ON switch is directional which means the magnet will only switch ON the MuckPuck™ device if it comes close/in contact with the top center of the MuckPuck™ device as shown in the picture below. -
Once the MuckPuck™ device is ON, it would automatically broadcast its location and other sensor data periodically and when motion is detected. The MuckPuck™ device data can be received and comprehended by Peytec’s compatible readers.
-
Certain MuckPuck™ information can be scanned using a compatible NFC-enabled Smartphone with installed Peytec’s app. To scan a MuckPuck™ device, make sure the NFC on your Smartphone is ON. Once confirmed, simply click on “Scan Tag” on your app and hold your phone close to the MuckPuck™ devise until the scan is complete.
-
To update the MuckPuck™ status, simply make the changes as you wish on Peytec’s mobile app and click on “Upload” and wait for the confirmation message on your mobile phone confirming the MuckPuck™ Device is programmed.
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
To maintain compliance with FCC’s RF exposure guidelines. This equipment
should be installed and operated with a minimum distance between 20cm of the
radiator your body: Use only the supplied antenna. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Regulatory Compliance
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- To maintain compliance with ISED’s RF Exposure guidelines. This equipment should be installed and operated with a minimum distance between 20cm of the radiator your body: Use only the supplied antenna.
Contact Information:
Email: info@peytec.com
Phone: 647-292-9531
Website: www.peytec.com
Address: 120 East Beaver Creek Rd
Suite 200, Richmond Hill, ON L4B 4V1