CANOPIA 6×4 Hybrid Greenhouses Instruction Manual

: June 12, 2024
: CANOPIA

CANOPIA 6×4 Hybrid Greenhouses

Product Information

HybridTM 6×4 / 2×1.3

The HybridTM 6×4 / 2×1.3 is a polycarbonate greenhouse manufactured by Canopia, a member of Palram Industries Ltd. The product is designed to provide an ideal environment for growing plants and vegetables. It features a sturdy aluminum frame and clear polycarbonate panels that offer high-light transmission and UV protection. The greenhouse is easy to assemble and comes with detailed instructions.

Product Usage Instructions

Before starting assembly, carefully read the instructions provided in the manual.
Identify all parts and ensure that you have all the necessary tools and equipment.
Begin assembly by following the step-by-step instructions provided in the manual.
Use caution when handling polycarbonate panels to avoid damage or injury.
Once assembled, place the greenhouse in a suitable location that receives adequate sunlight and ventilation.
Ensure that the greenhouse is properly anchored to prevent damage from wind or other environmental factors.
Regularly clean and maintain the greenhouse to ensure optimal growing conditions.
If you need assistance with assembly or have any questions about the product, refer to the contact information provided in the manual or visit canopia.com for support.

HOW TO ASSEMBLE VIDEO

CANOPIA-CANOPIA-6x4-Hybrid-Greenhouses-
fig-1

AFTER-SALES SERVICE

Our self-service form makes it convenient and fast. Go to the URL below or scan the QR code with your phone to submit you request.

Missing a part or need a new one?

canopia.shop/part-request

CUSTOMER SUPPORT

WE ARE HERE TO HELP
SCAN ME
For general questions: canopia.com/contact-us

USA (877-627-8476
hobbyservice@poly-tex.com

BASE DIMENSIONS HYBRID

CANOPIA-CANOPIA-6x4-Hybrid-Greenhouses-
fig-3

SITE PREPARATION & FOUNDATION

A – PREPARE THE SITE

The product must be positioned and fixed on
flat level surface.

Clear the site
Level the ground

IMPORTANT We recommend checking for restrictions or covenants for building this product in your area. In addition we advise to check if you need to submit any forms or if any permit is required prior to building the product.

B- CHOOSE YOUR FOUNDATION TYPE
For foundation, we recommend using three material types: Concrete / Pressure treated wood / wood deck / Paver blocks

Option 1: Solid foundation
Option 2: Solid frame
Option 3: Firm ground grass
The size of the greenhouse displayed is for illustration purposes only and may not reflect the size of your greenhouse.

On a solid foundation/frame

Secure the product to the foundation of your choice using suitable screws & plugs or masonry anchors (not supplied.
Make sure you have at least 5 cm / 2″ between the product base and the edges of your foundation • on all sides.
On soil / grass
Secure the product to the ground surface using suitable long pegs (not supplied). Please consult with an expert regarding which fasteners are suitable for other surface types.

SAFETY ADVICE

It is of utmost importance to assemble all of the parts according to the directions. Do not skip any steps.
Always wear work gloves during panel sliding.
Always wear shoes and safety goggles when working with extruded aluminium.
If using a step ladder or power tools make sure that you follow the manufacturer’s safety advice.
Do not touch overhead power cables with the aluminium profiles.
Do not attempt to assemble the product in windy or wet conditions.
Do not climb or stand on the roof.
Dispose of all plastic bags. Keep them out of reach of small children.
Keep children away from the assembly area.
Do not lean against or push the products during construction.
Do not position vour product in an area exposed to excessive winds.
Do not attempt to assemble this product if you are tired, have taken drugs or alcohol or if you are prone to dizzy spells.
Hot items such as recently used grills, blowtorches etc. must not be stored in the product.
Make sure there are no hidden pipes or cables in the ground before anchoring to a foundation.
This product is designed to be used mainly as a greenhouse.
Make sure to anchor the product directly to a solid foundation to increase the product’s stability and wind resistance in areas with severe weather conditions. Make sure that there are no obstructions between the assembly area and the final position of the product. The Palram –
Canopia Anchoring kit is available for purchase separately.

CARE & MAINTENANCE

When your product needs to be cleaned, use a mild detergent solution and rinse with cold clean water.
DO NOT use acetone, abrasive cleaners or other special detergents to clean the panels.
Clean the product once assembly is complete.

TOOLS & EOUIPMENT

CANOPIA-CANOPIA-6x4-Hybrid-Greenhouses-
fig-11

BEFORE ASSEMBLY

Selecting a site:
- Choose your site carefully before beginning assembly.
- Choose a sunny position away from overhanging trees.
- The product must be positioned and fixed on a flat level surface.
The product must be secured directly to a solid foundation.
This is a multi-part assembly best achieved by two people. Allow at least half a day for the assembly process.
Take all components & parts out of the packages. Sort the parts and check against the content parts list.
Parts should be laid out close at hand. Keep all small parts (screws etc.) in a bowl so they do not get lost.
Please note multi-sided profiles are used in this product. As a result some holes in the profiles are not used during assembly.
Please review entire instructions before starting. Carry out the assembly steps in exact order.
Please consult your local authorities if any permits are required prior to constructing the product.

IMPORTANT!

Firmly connect the product to a level surface immediately after completion of the assembly.
Anchoring this product to the ground is essential to its stability and rigidity.
It is required to complete this stage in order for your warranty to be valid.
During assembly use a soft surface below the parts to avoid scratches and damages.

DURING ASSEMBLY

CANOPIA-CANOPIA-6x4-Hybrid-Greenhouses-fig-12

During assembly, you will encounter different icons for different products.
Please see below for more information:
During assembly you will encounter the information icon, please refer to the relevant assembly step for additional comments and assistance.
You may use silicone lubricant spray on the frame in order to help you slide the panels into the profiles. Do not spray the panels.
Use a rubber mallet if necessary.
Make sure you remove covering plastic film from both sides of the panel.
All panels with the stamped words “THIS SIDE OUT” must be facing out to create full UV protection. Remove plastic sticker as panels are locked in place.
This icon indicates that the installer should be inside the product.
This icon indicates that the installer should be outside the product.
Steps marked with dashed outlines refer to Extensions only.
Some of the steps are irrelevant for an assembly of : single product.
When assembling a single or an extended product, some parts may be surplus.
These 2 icons below indicate if screw’s tightening is required or not.
Temporary tightening of a few screws may be needed to prevent a profile from sliding out.
Tighten all screws once assembly is completed.

IMPORTANT ASSEMBLY STEPS

When encountering this information icon during assembly, please refer to the relevant assembly step for important additional comments.

Step 6:

Parts #994 & #995 are in the back of the greenhouse.
Attaching them determines the front side of the greenhouse.

Steps 9, 12:

The oval hole in the crossbars #256 should always be assembled to the base of the greenhouse.

Step 10:

Door Assembly:
Determines door direction.
Part #987 is the is side that the door hinges will be located.
The door can be installed either as a left or right hand door.
These instructions show ; right hand door assembly.

Step 30: Window Assembly

Decide on the window’s location before assembly. Window can be installed in one of the indicated options.

Step 47:

In case the window doesn’t closed properly, please release the screws, adjust the profile and tighten the screw.

INSTALLATION INSTRUCTION

CANOPIA-CANOPIA-6x4-Hybrid-Greenhouses-
fig-17

PALRAM – CANOPIA 5 years Limited Warranty

Product Details: Canopia Greenhouses

Palram Applications (1995) Ltd (Company number: 512106824) whose registered office is at Teradion Industrial Park, M.P Misgav 20174, Israel (“Palram”) warrants that the
product will be free from defects in material or workmanship for a period of 5 years from the original date of purchase subject to the definitions, terms and conditions
contained in this warranty.
Conditions
This warranty shall be valid only if the product is installed, cleaned, handled and maintained in accordance with Palram’s written recommendations (Recommended Use:
Hobby Gardening).
Without derogating from the above, damage caused by use of force, incorrect handling, inappropriate use, neglectful use or assembly or maintenance, accidents,
impact from foreign objects, vandalism, pollutants, alteration, painting, connecting, gluing, sealing not in accordance with the user’s manual, or damage resulting from not
cleaning with incompatible detergents and minor deviations of the product are not covered by this warranty.
This warranty does not apply to damage resulting from “force majeure”, which includes but is not limited to, hail, storm, tornado, hurricane, blizzard, flood, fire effects.
This warranty is void if structural parts and components used are not compatible with Palram’s written recommendations.
This Warranty applies only to the original purchaser of the product. It does not extend to any other purchaser or user of the product (including, but not limited to,
any person who acquires the product from the original purchaser).
Any other use for any other purpose is under user’s sole responsibility. Palram disclaims and assumes no liability for any use not recommended by this warranty.

Claims and Notifications

Every warranty daim must be notified in writing to Palram within 30 days after the discovery of the defective product, enclosing the original sales receipt and this warranty.
The daimant must allow Palram to inspect the product involved and the installation site itself while the product is still in its original position and has not been removed or moved or altered in any way and/or return the product to Palram for testing.
Palram reserves the right to investigate independently the cause of any failure.

Compensation

If a claim under this Warranty is properly notified and approved by Palram, the purchaser, at Palram’s option, may either (a) purchase a replacement product or part/s; or (b) receive refund of the original product or parts purchase price, all in accordance with the following schedule:
For avoidance of any doubt, calculation for determination regarding compensation for defective part/s, according to the schedule above, will be based on the contribution of
the defective part to the original cost of the product. Palram reserves the right to provide substitutions if the product or any part of it is unavailable or obsolete.
This warranty does not cover any costs and expenses of removal and installation of the product or taxes or shipping cost or any other direct or indirect losses) which may
result from the product failure.

General Conditions and Limitations

OTHER THAN HAS BEEN SPECIFICALLY STATED IN THIS WARRANTY, ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PRTICULAR PURPOSE ARE EXCLUDED SO FAR AS THE LAW PERMITS.
EXCEPT WHERE WE HAVE SPECIFICALLY STATED IN THIS WARRANTY, PALRAM SHALL NOT BE LIABLE FOR ANY LOSSES OR DAMAGES THE PURCHASER SUFFERS DIRECTLY. INDIRECTLY OR AS A CONSEQUENCE OF USING. OR IN ANY OTHER WAY CONNECTED TO THE PRODUCT.
IF PALRAM IS PROHIBITED UNDER ANY APPLICABLE LAW FROM EXCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IN RELATION TO THE PRODUCT, THE DURATION OF ALL SUCH IMPLIED WARRANTIES IS EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY OR, IF LONGER, THE MAXIMUM PERIOD REQUIRED BY APPLICABLE LAW.
THE PURCHASER IS SOLELY RESPONSIBLE FOR DETERMINING WHETHER THE HANDLING, STORAGE, ASSEMBLY, INSTALLATION OR USE OF THE PRODUCT IS SAFE AND APPROPRIATE IN ANY LOCATION, FOR ANY GIVEN APPLICATION OR IN ANY GIVEN CIRCUMSTANCE. PALRAM IS NOT RESPONSIBLE FOR ANY DAMAGES OR INJURY TO
THE PURCHASER, ANY OTHER PERSON OR ANY PROPERTY RESULTING FROM THE IMPROPER HANDLING. STORAGE, INSTALLATION, ASSEMBLY OR USE OF THE PRODUCT OR THE FAILURE TO FOLLOW THE WRITTEN INSTRUCTIONS REGARDING THE HANDLING STORAGE. INSTALLATION, ASSEMBLY AND USE OF THE PRODUCT.
UNLESS OTHERWISE EXPRESSLY INDICATED BY PALRAM. THE PRODUCT IS INTENDED FOR NORMAL RESIDENTIAL AND COMMERCIAL USE ONLY, PALRAM IS NOT RESPONSIBLE FOR ANY LOSS, DAMAGE, COST OR EXPENSE RESULTING FROM ANY USE OF THE PRODUCT FOR ANY PURPOSE THAT IS NOT RECOMMENDED BY THE WRITTEN INSTRUCTIONS OR THAT IS NOT PERMITTED BY ANY APPLICABLE LEGISLATION OR OTHER CODES IN EFFECT IN THE LOCATION WHERE THE PURCHASER WILL USE THE PRODUCT.
PLEASE NOTE: ANCHORING THIS PRODUCT TO THE GROUND IS ESSENTIAL TO ITS STABILITY AND RIGIDITY. IT IS REOUIRED TO COMPLETE THIS STAGE IN ORDER FOR YOUR WARRANTY TO BE VALID

IMPORTANT!