Selek SOB1400 One TV Wall Mount Instruction Manual

Selek SOB1400 One TV Wall Mount

Technical Parameter

• Max VESA:400×400 (SOB1400) / 600×400 (SOB1600)
• Maximum load: 35kg
• Tilt: -10 to 0 degrees

Parts List

Please check the parts in the package against the following list to ensure that all parts are included. Never use defective parts or replace parts with different specifications.

• (A) M6x50 Self-tap Screw (4)
• (B) 8×40 Plastic Anchor (4)
• (C) D6 Flat Washer (4)
• (D) D5,6,8 Flat Washer (4)
• (E) 5mm Plastic Spacer (8)
• (F) 15mm Plastic Spacer (4)
• (G) M5x14 Screw (4)
• (H) M6x14 Screw (4)
• (I) M6x30 Screw (4)
• (J) M8x20 Screw (4)
• (K) M8x45 Screw (4)
• (L) Bubble Level (1)

Installation and Operation Instructions

Note : Please read the instructions carefully before installation!

1. Step 1: Wall Installation
2. Use the wall plate as a template to drill four holes with a diameter of 8mm and a depth of 40mm in the wall. Then wedge four plastic anchors into the holes.
3. Step 2: Install the Wall Plate
4. Put the wall plate on the wall and then screw four self-tap screws into each plastic anchor through a metal washer to fix the wall plate onto the wall.
5. Step 3: Install the Bracket Rail onto the Back of the TV
6. Select suitable screws from the screw package according to the size of the holes in the back of the TV. Fix the two hanging arms onto the back of the TV by screwing them into the holes. Make sure the two hanging arms are at equal height.
7. Step 4: Hang the TV onto the Wall Plate
8. Hang the TV onto the wall plate and relax your hands until they are caught hold of.
9. Step 5: Tighten Screws
10. Tighten the screw of the two hanging arms to ensure that the TV is firmly fixed.

Bolt : Sinox Europe A/S Troensevej 11. DK-9220 Aalborg www.sinox- europe.com

SOB1400 INSTALLATION

Technical Parameter
Max VESA:400×400; Maximum load:35kg; Tilt -10 to 0 degrees.

Parts List

Please check the parts in the package in comparison with the following list,make sure all of the parts are in the package. Never use defective parts, never replace part with different specification.

Installation and operation instructions

Note : please read the instructions carefully before installation!

1. Step 1:
   Use the wall plate as a template to drill four holes of dia. 8mm and 40mm depth in the wall. Then wedge four plastic anchors into the holes.

2. Step 2:
   Install the wall plate. Put the wall plate on the wall, and then screw four self-tap screws into each plastic anchor through metal washer to fix the wall plate onto the wall.

3. Step 3:
   Install the bracket rail onto the back of the TV: Select suitable screws from the screw package according to the size of the holes in the back of TV. Fix the two hanging arms onto the back of TV by screws into the holes.Make sure equal height of the two hanging arms.

4. Step 4:
   Hanging the TV onto the wall plate, relax the hands until they are caught hold of

5. Step 5:
   Tighten the screw of the two hanging arms to make sure the TV has been fixed firmly.

SOB1600 INSTALLATION

Technical Parameter
Max VESA:600×400; Maximum load:35kg; Tilt -10 to 0 degrees.

Parts List

Please check the parts in the package in comparison with the following list,make sure all of
the parts are in the package. Never use defective parts, never replace part with different specification.

Installation and operation instructions
Note : please read the instructions carefully before installation!

1. Step 1:
   Use the wall plate as a template to drill four holes of dia. 8mm and 40mm depth in the wall. Then wedge four plastic anchors into the holes.

2. Step 2:
   Install the wall plate. Put the wall plate on the wall, and then screw four self-tap screws into each plastic anchor through metal washer to fix the wall plate onto the wall.

3. Step 3:
   Install the bracket rail onto the back of the TV: Select suitable screws from the screw package according to the size of the holes in the back of TV. Fix the two hanging arms onto the back of TV by screws into the holes.Make sure equal height of the two hanging arms.

4. Step 4:
   Hanging the TV onto the wall plate, relax the hands until they are caught hold of.

5. Step 5:
   Tighten the screw of the two hanging arms to make sure the TV has been fixed firmly.

Sinox Europe A/S Troensevej 11. DK-9220 Aalborg. www.sinox- europe.com

References

• Sinox Europe

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>