NESTFAIR MDR7721B Square Framed Hanging Wall Mirror User Manual
- October 30, 2023
- Nestfair
Table of Contents
CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents.Sharp objects will
damage(scratch) the surface.Wipe the surface with a soft cloth(not be too
wet).
NOTICE
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
Hardware List
PIECE | DESCRIPTION | PICTURE | QUANTITY |
---|---|---|---|
A | Wirerope Lock | 2X | |
B | Short Screw for Rope Lock | 4X | |
C | Wirerope | 1X | |
D | Anchor | 1X | |
E | Long Screw for Anchor | 1X |
PREPARATION
Before beginning assembly of product,make sure all parts are present.
If any part is missing or damaged,do not attempt to assemble the product.
Estimated Assembly Time:5 minutes.
Tools Required for Assembly:Pencil,Electric Drill,Hammer,Screwdriver
Step 1
Pass the wirerope (C) through a hole of the wirerope lock (A) and then through
the product hook and through the other hole of the wirerope lock.And put the
short screw(B) on the top and the bottom of the wirerope lock and tighten them
by screwdriver.
Step 2
The installation of the wirerope(C) at the other end is the same as step 1.
Step 3
Determine the desired placement of the mirror on the wall.Mark the hanging
point with a pencil.
Step 4
Drill a 3/8 inch hole in the wall(No Hammer here)
Step 5
Insert the anchor (D),and hammer it in the wall.
Step 6
Insert long Screw (E) into Anchor(D) and tighten the screw using screwdriver.
Step 7
Turn a certain length of screw counterclockwise to hang the wirerope.
Step 8
Hang the wirerope.Complete!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>