NESTFAIR MDR7716G Oval Framed Hanging Wall Mirror Instruction Manual
- October 30, 2023
- Nestfair
Table of Contents
MDR7716G Oval Framed Hanging Wall Mirror
Instruction Manual
CARE AND MAINTENANCE
Do not use acids or alkaline cleaning agents. Sharp objects will
damage(scratch) the surface. Wipe the surface with a soft cloth(not be too
wet).
NOTICE
Please make sure that you have all parts indicated before you begin assembly of this item
This item should be assembled on a soft surface to prevent scratching the finish during assembly
Hardware List
PIECE | DESCRIPTION | PICTURE | QUANTITY |
---|---|---|---|
A | Plastic drywall anchor | 1X | |
B | Metal screw with attached decorative knob | 1X |
PREPARATION
Before beginning assembly of product, make sure all parts are present.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:5 minutes.
Tools Required for Assembly: Pencil, Electric Drill
Step 1
Determine the desired placement of the mirror on the wall. Hold the mirror
against the wall and mark the hanging point with a pencil.
Step 2
Drill hole for anchor using 1/8 inch drill bit. Insert anchor into hole using
screwdriver until anchor is flush with wall.
Step 3
Insert screw into anchor by holding the knob and turning clockwise.
Step 4
Place ring around extended knob.