Seafuloy Nestfair W662S00002-1 Two Door Glass Display Cabinet with 4 Shelves Instruction Manual
- October 30, 2023
- Seafuloy Nestfair
Table of Contents
” TRANSPARENT ” CABINET
TEMPERED GLASS
WINE CABINET / DISPLAY CABINET
W662S00002-1 Two Door Glass Display Cabinet with 4 Shelves
ACCESSORY PACKAGE
ANTI-DUMPING DEVICE Screw the anti-pour device to the top plate, and then
screw the other end to the wall 
Important information
Read carefully.
Keep this information for furture reference.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
To prevent this furniture from tipping over, it must be permanently fixed to
the wall.
There is only one kind of wall fixing device included in the product, which is
only applicable to wood wall or solid wall. Wood wait only needs to be fixed
with screws, it does not need expansion bolt; Load bearing wall and solid wall
need impact drill-ing, expansion bolts and screws. The wall fixing device
(anti-tip device) included in the product is not suitable for walls that have
weak nail holding force, such as gypsum board. If it needs to be fixed on a
wall which is similar to gypsum board, please make sure that the screw is
fixed at the keel position, and ensure that the screw force point is firm.
Please use suitable fixtures for your home wall because different wall
materials require different types of fixtures.
- Tempered glass has a 3 %o probability of self explosion. If self explosion occurs accidentally, please contact online customer service, and we will reissue the tempered glass for you. During installation, please wear gloves, long sleeve shirt, trousers and socks to avoid injury in case of accident;
- To avoid accident, please do not let minors nor children approach during installation. At the same time, please make sure that the installers are two adults.
- During installation, please use cardboards or carpets as buffer layers to isolate the possibility of collision between the glass corner and hard objects such as the ground. Especially when installing tempered glass, please do not let the corner knock to the ground, so as to avoid self explosion of tempered glass caused by stress change;
- After the cabinet is installed, be sure to install the anti-tip device to prevent serious or fatal injury. In order to prevent tipping over, the cabinet must be permanently connected to the wall. (wall fixing device, including but not limited to the anti-tip device we provided, you can install similar devices to avoid danger and increase safety)
- In daily use, only legal adults can use the glass cabinet. Minors should stay away from the cabinet. Please instruct or take care of children to stay away from the cabinet to avoid the risk of collision of cabinet door or falling of objects caused by children’s be-haviors such as opening, closing and shaking cabinet. Once again, it is strongly recommended that you install an anti-tip device, keep minors away (2m radius of the product), and install a door lock to avoid accidental injury caused by children open and close cabinet.
- The top/bottom plate of tempered glass cabinet is made of melamine paper covered particleboard, edge band is made of PVC material. They do not have fire protection function.
- When the product is discarded, please consult the relevant local departments or companies for classification
- The product is a partially transparent tempered glass cabinet, it is not fully transparent. After installation, the gap will be differ-enct dur to the different fastening or error.
- No part of the product can be swallowed, played or used for other purposes.
- After installation of the product, Plate glass load-bearing5kg. Note that the load bearing data is limited to the product and its contents.
- Product dimensions may have an error with 10mm due to the usage of different measuring tools or methods.
PRODCT COMPONENT TABLE
| ASSEMBLY| SIZE (MM)| QUANTITY| TEXTURE OF MATERIAL
---|---|---|---|---
1| Back glass| 1576×390| 1| Tempered glass
2| Side glass| 1576×345| 2
3| Door glass| 1556×387| 1
4| Shelf glass| 385x315x5| 3
5| Top / bottom plate| 425×365| 2| Particleboard MFC
6| Accessories package| “‘| X| Multiple materials
INSTALLATION INSTRUCTIONS
 Door
stopper / Door spindle core
Before installation, confirm the top plate and bottom plate, and knock the door stopper and door spindle core into the hole. Otherwise, it will be difficult to install tthe door stopper and door spindle core in subsequent installation.Since the hole position of the top/bottom plate has an error of ± 0.5 mm, we are con-cerned that the error will affect your experience, hereby remind, please forgive me!
Please
install the door lock, door clip, angle guard, door handle in advance. When
installing No. 3 (door glass) , lift the top board gently to install the
convenient door glass.
It is suggested to put heavy items below to
improve the stability of the wine cabinet.
TEMPERED GLASS
WINE CABINET / DISPLAY CABINET
ACCESSORY PACKAGE ANTI-DUMPING DEVICE Screw the anti-pour device to
the top plate, and then screw the other end to the wall
Important information
Read carefully.
Keep this information for furture reference.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
To prevent this furniture from tipping over, it must be permanently fixed to
the wall.
There is only one kind of wall fixing device included in the product, which is
only applicable to wood wall or solid wall. Wood wall only needs to be fixed
with screws, it does not need expansion bolt; Load bearing wall and solid wall
need impact drill-ing, expansion bolts and screws. The wall fixing device
(anti-tip device) included in the product is not suitable for walls that have
weak nail holding force, such as gypsum board. If it needs to be fixed on a
wall which is similar to gypsum board, please make sure that the screw is
fixed at the keel position, and ensure that the screw force point is firm.
Please use suitable fixtures for your home wall because different wall
materials require different types of fixtures.
- Tempered glass has a 3 %o probability of self explosion. If self explosion occurs accidentally, please contact online customer service, and we will reissue the tempered glass for you. During installation, please wear gloves, long sleeve shirt, trousers and socks to avoid injury in case of accident;
- To avoid accident, please do not let minors nor children approach during installation. At the same time, please make sure that the installers are two adults.
- During installation, please use cardboards or carpets as buffer layers to isolate the possibility of collision between the glass corner and hard objects such as the ground. Especially when installing tempered glass, please do not let the corner knock to the ground, so as to avoid self explosion of tempered glass caused by stress change;
- After the cabinet is installed, be sure to install the anti-tip device to prevent serious or fatal injury. In order to prevent tipping over, the cabinet must be permanently connected to the wall. (wall fixing device, including but not limited to the anti-tip device we provided, you can install similar devices to avoid danger and increase safety)
- In daily use, only legal adults can use the glass cabinet. Minors should stay away from the cabinet. Please instruct or take care of children to stay away from the cabinet to avoid the risk of collision of cabinet door or falling of objects caused by children’s be-haviors such as opening, closing and shaking cabinet. Once again, it is strongly recommended that you install an anti-tip device, keep minors away (2m radius of the product), and install a door lock to avoid accidental injury caused by children open and close cabinet.
- The top/bottom plate of tempered glass cabinet is made of melamine paper covered particleboard, edge band is made of PVC material. They do not have fire protection function.
- When the product is discarded, please consult the relevant local departments or companies for classification
- The product is a partially transparent tempered glass cabinet, it is not fully transparent. After installation, the gap will be differ-enct dur to the different fastening or error.
- No part of the product can be swallowed, played or used for other purposes.
- After installation of the product, Plate glass load-bearing8kg. Note that the load bearing data is limited to the product and its contents.
- Product dimensions may have an error with lOmm due to the usage of different measuring tools or methods.
PRODCT COMPONENT TABLE
| ASSEMBLY| SIZE (MM)| QUANTITY| TEXTURE OF MATERIAL
---|---|---|---|---
1| Back glass| 1576×390| 2| Tempered glass
2| Side glass| 1576×345| 2
3| Door glass| 1556×387| 2
4| Shelf glass| 775×315| 3
5| Top / bottom plate| 805×365| 2| Particleboard MFC
6| Accessories package| …| X| Multiple materials
7| Rubber Strip| …| 1| PVC
INSTALLATION INSTRUCTIONS
 Door
stopper / Door spindle core
Before installation, confirm the top plate and bottom plate, and knock the door stopper and door spindle core into the hole. Otherwise, it will be difficult to install tthe door stopper and door spindle core in subsequent installation. hereby remind, please forgive me!
If the
ground is uneven adjustabte anchor height Insert No. 2(side glass) into groove
and fix, White Gl-ass Hole Washer to glass hole (not on Top/bo-ttom) , black
rubber ring to screw cap ahead of time
INSTALLATION INSTRUCTIONS
Door
stopper / Door spindle core
Before installation, confirm the top plate and bottom plate, and knock the door stopper and door spindle core into the hole. Otherwise, it will be difficult to install tthe door stopper and door spindle core in subsequent installa-tion.Since the hole position of the top/bottom plate has an error of ± 0.5 mm, we are concerned that the error will affect your experience, hereby remind, please forgive me!
If the ground is uneven adjustabte anchor
height
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>