OLG LXHDPKG_3_B Balance Executive with Arms and Lumbar Instruction Manual
- October 30, 2023
- OLG
Table of Contents
Balance Executive with Arms & Lumbar
Assembly Instructions
Balance Executive with Arms & Lumbar
Components List
Assembly Instructions
Slip Cover (sold separately)
- Assemble chair
- Remove old slip cover and foam from seatpan by unfastening the velcro fasteners on the back and front of seat. Remove the back fasteners fist.
- Unzip old slip cover and remove from foam.
- Install new slip cover onto the foam.
- Make sure all four slip cover corners match tothe foam corners, top & bottom. Close zipperapprocimately 2”
- Align 2 front corners and install using velcro fasteners. Lift back of seat and zip up slip cover. Align 2 back corners and install using velcro fasteners.
Sydney 02 8188 2732
Melbourne 03 9111 0315
Brisbane 07 3733 1923
Adelaide 08 7111 0810
Perth 08 9468 2707
info@olgoffice.com
myolg.online
olgoffice.com
officedesigner.net
motionoffice.com
References
Read User Manual Online (PDF format)
Loading......