HJKB H3-B?PRO Underwater Bluetooth Selfie User Manual

HJKB H3-B?PRO Underwater Bluetooth Selfie User Manual

Product analysis chart

1. Back cover

2. Photo key

3. Safety wrench

4. Camera window

5. Hanging rope

6. Antiskid zone

7. Mobile phone suction cup

8. H3-B Bluetooth version Charging port

9. H3 Type-c version\ H3 Apple version cable

10. Lanyard hole

11. Safety screw

12. Auxiliary wrench

13. Auxiliary silica gel

14. TPE screen

15. Turn the safety screw and open the safety wrench
    

Open the cover and fix the auxiliary silicone position

3-1 H3-B Bluetooth version

Open the Bluetooth pairing connection of the mobile phone and put it into H3-B
Start the camera and connect the cable.

3-2 H3-B Apple version/H3-B Type-c version.

4. Close lid and press on

5. Close the Safety wrench and turn the safety screw

H3 Bluetooth version (H3-B)

Compatible phone model
Universal for iPhone and Android phones

Basic parameters

• Equipment name : H3-B · Bluetooth Version: 4.2
•  Battery capacity: 200mAh · Input power: 2.5W
• Charging time: 40 min · Use time : 30 h

Instructions

• Press and hold the key for 5 seconds to switch on and off.
• After power on, the LED indicator of the self timer flashes quickly, waiting for pairing.
• Turn on the Bluetooth search device H3 of the mobile phone and connect it in pairs. After connecting, the LED of the self timer turns from flash to off.
• In the mobile phone camera mode, short press once to take a picture or start recording, then short press once to take a picture or stop recording.

H3 and mobile phone paired connection

Mi phones: Before connecting, turn on the rapid camera mode in the mobile phone settings (some models are turned on by default); After connecting, in the information screen mode,
double-click the self timer button to quickly start the camera, and briefly press the button to take photos or video.

Huawei mobile phone: Before connecting, turn on the rapid camera mode in the mobile phone settings (some models are turned on by default); After connecting, in the information screen mode, double-click the self timer button to quickly start the camera, and briefly press the button to take photos or video.

Samsung / apple: Before connecting, turn on the quick start camera in the mobile phone settings (some models are turned on by default), and turn on the mobile phone camera function when the mobile phone has no password (including password, fingerprint and facial recognition); After connecting, in this state, after stopping the screen, press the hold button for 2 seconds to release it. The phone will wake up and enter the camera mode. Press the hold button to take photos or video.

H3 Apple Edition (H3-L)

Compatible phone model

iphone 6/6s/7/8/6P/6SP/7P/8P/SE
iphone X/XS/XR/XSMax
iphone 11/11Pro/11ProMax
iphone 12/12Pro/12ProMax/12mini
Or more than 6 iPhone series can be adapted.

H3 Type-c version

Compatible phone model

Android type-C interface mobile phones, such as Huawei,
Xiaomi, Samsung;(Android phone needs to upgrade the system to the latest version)

Note:

• The maximum size of the camera case is: 163mm in length,  78mm in width, and less than 6.7 inch screen.
• Try not to poke the screen directly with your fingers. The correct use is to press the button in the upper right corner to take photos; It is suggested that the mobile phone should be
  on the screen for a long time to avoid dormancy.

warning :

• The maximum waterproof depth is 50 meters, underwater camera mode is supported, and touch screen is not supported.
• Note: please read the “instruction manual” carefully before use.
• Or please study the relevant instruction manual.
• Waterproof test before installation of equipment.
• Please install the equipment correctly to prevent damage.
• Make sure all ports and seams are tightly closed.
• After a major drop, check the product for damage and ensure that all seams are closed.
• After major impact and before entering water, waterproof test without device shall be conducted regularly.
  Before closing the enclosure, make sure that all seals are in good condition and that the waterproof ring is free of dust, fiber and debris.

Waterproof test

• Open the phone case;
• Put the prepared absorbent paper into the product;
• Close the product to ensure that the product is completely locked;
• Soak in water for 60 minutes, and the immersion depth should not exceed 50 meters;
• Take out the product and wipe the surface with a fiber cloth;
• Open the lid and take out the absorbent paper;
• Check the absorbent paper carefully, only the absorbent paper can be used in a dry state, otherwise please stop use and contact customer service;

FCC Warning Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. Such modifications could void the user’s authority to operate the equipment.
3. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
   Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   —Reorient or relocate the receiving antenna.
   —Increase the separation between the equipment and receiver.
   —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   —Consult the dealer or an experienced radio/TV technician for help.

Manufacturer: Shenzhen Qianhai Huajin Kangbei Technology Co.,Ltd
Address: A703, 68 Guangda Road, Baoan Community, Yuanshan Street, Longgang District, Shenzhen, China

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>