BUNKER 33212 Installing Corner Back Panel Instructions
- October 30, 2023
- BUNKER
Table of Contents
BUNKER 33212 Installing Corner Back Panel Instructions
To make assembly easier we recommend having two persons aid one another in assembly.
STEP 1:
Attach wall bracket (single and double)* to corner floor cabinet with bolt M8
x16mm, washer 18 x 8 x 1mm and spring washer 14 x 8.8 x 2.6mm, and tighten
with wrench (not included).
STEP 2:
Attach corner unit back panel to wall bracket (single & double)* with bolt M6
x 16mm, nut M6 and spring washer 12 x 6.5 x 0.8mm, and tighten with wrench
(not included)
NOTE:
- Use wall bracket (single x 2 ) + wall bracket (double x 2) for connecting with other unit back panel.
- Use wall bracket ( single x 4) if assemble corner unit alone.
STEP 3:
Attach mounting bracket to back panel of corner wall cabinet with bolt M6 x
12mm and tighten with phillips screwdriver (not included)
STEP 4:
Hang the corner wall cabinet onto corner unit back panels
STEP 5:
Attach corner wall cabinet to wall brackets (single & double) with bolt M8 x
16mm, flat washer 8 x 8 x 1mm and spring washer 14 x 8.8 x 2.6mm, and tighten
with wrench (not included).
CABINET CONNECTION
Connect the side panels of two cabinets with (4) bolt M6 x 16mm and nut M6,
and tighten with wrench (not included).
Note : remove the drawers and open the doors before cabinet connection.
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire.
SO53 1YF UK.