BUNKER 08237 Workbench Roller Tool Cabinet Instructions
- October 30, 2023
- BUNKER
Table of Contents
BUNKER 08237 Workbench Roller Tool Cabinet Instructions
ATTACH CABINET HANDLE
- Position the cabinet handle over the holes on the cabinet.
- Attach with (4) M6 x 16mm bolts and tighten with supplied hex key
REMOVING AND REPLACING THE DRAWERS
- Pull the drawer completely out.
- Press down the left tab and lift up the right tab.
- Pull drawer off slides.
- To reinstall the drawer, realign with the internal drawer slide and push in until locked in place.
CASTOR MAINTENANCE
- Grease the castors annually using high-quality bearing grease.
CARE AND CLEANING
- Periodically the surfaces should be cleaned with a mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a non-flammable cleaning fluid.
- Auto wax will preserves the storage unit’s luster finish and protects against scratches.
References
Read User Manual Online (PDF format)
Loading......