BUNKER 33165 Preparing 1 Door Tall Cabinet Instructions
- June 8, 2024
- BUNKER
Table of Contents
BUNKER 33165 Preparing 1 Door Tall Cabinet Instructions
Assembly Instruction
To make assembly easier we recommend having two persons aid one another in assembly.
Item | Description | Quantity |
---|---|---|
1 | Top Panel | 1 |
2 | Bottom Panel | 1 |
3 | Left Side Panel | 1 |
4 | Right Side Panel | 1 |
5 | Back Panel | 1 |
6 | Door | 1 |
7 | Front Kick Panel | 1 |
8 | Side Kick Panel | 2 |
9 | Shelf Panel | 4 |
10 | Foot Holder | 4 |
11 | Leg Leveller | 4 |
12 | M8 x 16mm bolt | 16 |
13 | M6 x 16mm bolt | 12 |
14 | 12 x 7 x 5mm Flat Washer | 1 |
CABINET CONNECTION
Connect the side panels of two cabinets with (4) bolt M6 x 16mm and nut M6, and tighten with phillips screwdriver (not included).
Note: remove the drawers and open the doors before cabinet connection.
STEP 1:
Attach back panel (item 5) to left and right side panels (item 3 and 4) by
engaging the holes on the left and right side panels with the corresponding
hooks on back panel.
STEP 2:
Insert the top panel (item 1) into the side and back panels. Lay the cabinet
flat on the ground if necessary
STEP 3:
Insert the bottom panel (item 2) into the side and back panels. Lay the
cabinet flat on the ground if necessary.
STEP 4:
Use packaging material to protect the unit. Attach the leg leveller (item 11)
to foot holder (item 10). Insert bolt M8 x 16mm (item 12) through the foot
holder into the cabinet
STEP 5:
Attach the front and side kick panel (item 7 and 8) to foot holder with bolt
M6 x 16mm (item 13).
STEP 6:
Obliquely place the four shelf panels (item 9) in the cabinet, secure the
shlef panels at four desired heights by carefully inserting the shelf edges
into the flanges on left and right side panels. Make sure each shelf is leve
STEP 7:
Place the flat washer (item 14) into the hinge pin, algin the hinge pin on the
bottom of the door with the hole on bottom panel, slowly and carefully insert
the hinge pin into the hole. Algin the hinge pin on the top of the door with
the hole on top panel, slowly and carefully insert the hinge pin into the
hole.
\
drapertools.com
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF UK.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>