MOQI KE-001 Wireless Headphone Case User Manual

MOQI KE-001 Wireless Headphone Case

Specifications:

• Headphone capacity battery: 3.7V/2 * 25mAh
• Bluetooth effective distance unobstructed: 10m

Product Usage Instructions

1. Headphone Power On:
   The earphones will automatically turn on when they are out of the compartment. Press and hold for 2 seconds to manually turn on the earphones.

2. Headphone Shutdown:
   If the phone is not connected, press and hold for 5 seconds to turn off the earphones. The earphones will also shut down after 5 minutes of no connection or when placed back in the charging compartment.

3. Click:
   During a three-party call, clicking will hang up the current call and switch to the other suspended party’s call.

4. Double Click:
   Double-clicking can be used to play/pause music, answer calls, or hang up calls.

5. Three Strikes:
   Pressing the earphones three times will allow you to go to the previous song (L) or the next song (R). In a state with no audio, this action can turn on and off SIRI (requires phone support).

6. Long Press:
   During music playback, a long press on the earphones can decrease the volume (L) or increase the volume (R). Single earphones do not have this function.

FAQ:

How do I reset the headphones to factory settings?
To reset the headphones, follow these steps:

1. Delete the phone pairing first.
2. When the earphones are not connected to any device, tap both the left and right ears simultaneously five times.
3. The indicator lights will flash quickly and then turn off.
4. You will hear a sound prompt indicating power off.
5. The pairing for both ears will be cleared.
6. Place the earphones in the charging compartment, close the cover, and then remove and pair them again.

Overview

1. TYPE-C Power plug
2. Earphone compartment
3. The earphone charging indicator light
4. Headphone charging contact
5. Headset
6. Multi functional touch keys for headphones

Bluetooth

1. Remove the headphones and sound “power on”, The indicator light remains blue for 1 second and automatically teams up after startup, Entering reconnection/pairing state; 5 minutes of incomplete reconnection/pairing, automatic shutdown.
2. Long press the earphone function button for 2 seconds.
3. Sound “pairing” (Disconnect and enter pairing without this prompt sound), The red and blue indicator lights of the main ear flash alternately, and the Auxiliary ear blue light flashes slowly, After successful reconnection/pairing, the sound “connected”, The blue indicator light on the main ear flashes for 5 seconds before turning off.

LED Indicator Status

Quick flashing indicator light| The indicator light turns on for 0.2 seconds and goes off for 0.2 seconds, which is a cycle
---|---
Indicator light flashes slowly| The indicator light turns on for 0.2 seconds and goes off for 2 seconds, which is a cycle

Flashing indicator light

| The indicator light is on for 0.5 seconds and off for 0.5 seconds, which is a cycle

Indicator light breathing

flashing

| The indicator light gradually turns from light to dark for 1 second, and then turns from dark to light for 1 second in a cycle

Red and blue indicator lights alternate and flash

quickly

| The red indicator light is on for 0.2 seconds, and the blue indicator light is on for 0.2 seconds, which is a cycle

The red and blue indicator

lights alternate and flash slowly

| The red indicator light is on for 0.5 seconds, and the blue indicator light is on for 0.5 seconds, which is a cycle
horse race lamp| The indicator lights light up sequentially from the first one and then turn off (the first light stays on and on) in a cycle
---|---
pilot lamp| Indicator light always on

Instructions for using headphones

1. Headphone power on: The earphones will automatically turn on when they are out of the compartment. Press and hold for 2 seconds to turn on the earphones
2. Headphone shutdown: If the phone is not connected, press and hold for 5 seconds to turn it off; 5 minutes of shutdown without connection; Warehouse shutdown
3. Click  Three-party call status; Hang up the current call and switch to the other suspended party’s call
4. Double click: Play pause music, answer calls, hang up calls, hang up calls。
5. Three strikes: L for the previous song, R for the next song. Turn on and off SIRI in no audio state. Requires support from the phone itself。
6. Long press: When playing music; L reduces the volume; R increases the volume; Single earphones do not have this function

Specification parameters

1. Headphone capacity battery 3.7V/2 * 25mAh
2. Bluetooth effective distance unobstructed 10m

Restore factory settings

Please delete the phone pairing first. When the earphones are not connected to the device, tap the left and right ears 5 times at the same time. The traffic lights will flash quickly and then turn off. After the “DU” sound, the prompt “power off, clear pairing for both ears” will appear. Then, place the earphones in the charging compartment and close the cover before removing and pairing again.

Precaution

1. Do not use corrosive cleaning agents to clean this product
2. Do not allow this product to be heated or placed near a source of fire
3. Do not expose this product to long-term sunlight exposure
4. Do not disassemble or modify this product without authorization
5. Do not use this product in the rain
6. If this product is not used for a long time, please store it in a dry place and keep it charged once a month to extend its service life.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>