HAMPTON BAY A111016800 Seagrove Replacement Canopy for Octagonal Gazebo User Guide
- October 30, 2023
- HAMPTON BAY
Table of Contents
Item# 1006 663 463
Model# A111016800
SEAGROVE REPLACEMENT CANOPY FOR 10 FT. X 12 FT.
OCTAGONAL GAZEBO
USE AND CARE GUIDE
A111016800 Seagrove Replacement Canopy for Octagonal Gazebo
Questions, problems, missing parts? Before returning to the store, call
Hampton Bay Customer Service 8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6
p.m., EST, Saturday 1-800-841-1350
HAMPTONBAY.GOM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through
the purchase of this gazebo. We strive to continually create quality products
designed to enhance your home. Visit us online to see our full line of
products available for your home improvement needs. Thank you for choosing
Hampton Bay!
Assembly
Removing the Small Roof Oblique Beam
- Remove the small roof oblique beam (G) from the upper oblique beam (D1) (As shown below).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. 
Remove the Small Canopy
- Remove the old small roof canopy (M) from the small roof oblique beam (G), and untie the Velcro, (As shown below).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. 
Assembling the Small Canopy
- Spread the new small roof canopy (M) on the small roof oblique beam (G) and put the eight corners of the new small roof canapy (M) on the small roof oblique beam (G), and then stick the Velcro, (As shown below).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly.
Removing the Large Canopy
- Remove the old large roof canopy (N) from the upper/bottom oblique beams (D1/D2), and at the same time untie the Velcro, (As shown below).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. 
Assembling the Large Canopy
- Spread the new large roof canopy (N) on the upper/bottom oblique beams (D1/D2) and put the eight corners of the new large roof canopy (N) on the bottom oblique beam (D2), and then stick the Velcro, (As shown below).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. 
Completing the Assembly
- Insert the small roof oblique beam (G) into the upper oblique beam (D1) and snap the snaps on the small roof oblique beam (G) into the holes of the upper oblique beam (D1) (As shown below).
NOTE: To avoid destroying the finish, do not put the parts on the ground
directly. 
Questions, problems, missing parts? Before returning to the
store, call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday-Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-841-1350
HAMPTONBAY.COM
Retain this manual for future use.
WWW.HOMEDEPOQT.COM
Please contact 1-800-841-1350 for further assistance.