better bathrooms 27771 Stand Pipes User Manual
- October 30, 2023
- Better Bathrooms
Table of Contents
USER MANUAL
Product name : Stand
Pipes Product code/s : BeBa 27771/27778/27785
Thank you for choosing Better Bathrooms. Please read this manual before installing your product and keep for future reference.
27771 Stand Pipes
- Single-person assembly
- Tools required
- We always recommend using professional tradespeople to install your product V1_20/8/21
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers We’re on a mission to bring
you extraordinary bathroom products, for less. From modern to traditional
style ceramics, plus the gorgeous fixtures, fittings and furniture to match.
So, you can fall in love with your space every single day. As one of the UK’s
largest independent bathroom stores, we’ve received countless awards;
including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However,
should any problems occur, please:
- log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
- contact us via betterbathrooms.com/content/contact-us
Important information
- Please read these instructions thoroughly and retain for future reference
- Pressures should meet minimum stated on the website
- Pressures must be balanced for optimum performance
- Always check for pipes and cables before drilling
- Product should be installed to comply with local water bylaws and regulations
Dimensions
Installation
Tools required
SPANNER. SCREWDRIVER, HAMMER
Please note: Before starting the installation of a new mixer, turn off the
water supply
Please note: HOT supply to the left and COLD supply to the right
Prepare the location for the standpipes to be installed, by placing the bases
onto the floor and mark drill holes in required position ensuring they will
align with the mixer inlets and prepare the water supply pipes.
Depending on the floor type, insert the screw plugs and tap flush.
Place the base into position and secure using the screws and plugs (If
required) supplied
The flexi pipes should be fed through the base and the stand pipe.
Screw the connector to the bath mixer tail.
Fit the washer into the flexi pipe end.
Connect the flexi pipe end to the mixer tail and tighten.
Place the mixer tail into the stand pipe, until the connector sits on top of
the stand pipe, then secure using the screw provided.
Position the standpipe onto the base and secure into position using the screws
provided.
Connect the flexi pipe to the water supply pipe using a suitable sealing
method.
Turn on water supply and check for leaks.
Finish floor as required.
Parts / Diagrams
Cleaning
To maintain the surface finish of your product, wipe clean regularly, using a
clean damp cloth and dry cloth to polish. Do not use abrasive cleaning agents
or materials on the product surface as you may invalidate your guarantee.
Should any harsh chemicals come into contact with the surface of the product
during bathroom cleaning, rinse off immediately, wipe clean and dry.
“IMPORTANRT–Check the tails are fully tightened into the mixer before
connecting and turning on the water supply”
For more information
- visit betterbathrooms.com
- email customerservices@buyitdirect.co.uk
- call 0330 390 3062
- write to Trident Business Park, Neptune Way, Huddersfield, HD21UA
Part of the BuyltDirect Group
Documents / Resources
|
better bathrooms 27771 Stand
Pipes
[pdf] User Manual
27771 Stand Pipes, 27771, Stand Pipes, Pipes
---|---