3R studios EC0562 Wall Sconce with Clear Glass Shade Instruction Manual

3R studios EC0562 Wall Sconce with Clear Glass Shade

Product Information

This product is a lamp with an item number of EC0562. It comes with a mounting stripe (A), lamp body (H), shade (I), socket ring (J), black wire (B), white wire (C), bare ground wire (E), two supporting screws (G), wire connector (D), and outlet box screws (F). The lamp uses a Max 60W type A bulb or Max 9W self- ballasted LED bulb.

Product Usage Instructions

1. Unscrew two supporting screw (G) from the mounting stripe (A). Remove mounting stripe (A) from the lamp body (H), keep two supporting screw (G) for later use.
2. Fasten the mounting stripe (A) to the outlet box using two outlet box screws (F).
3. Connect the black wire (B) from the body (H) to black wire from outlet box, the white wire (C) from the body (H) to white wire from outlet box using wire connector (D) and connect bare ground wire (E) from the body (H) to ground wire from outlet box using wire connector (D), must loop one turn under the head of green screw on the mounting stripe (A).
4. Place lamp body (H) over the outlet box, align the two holes on the canopy on the lamp body(H) with two holes on the mounting stripe (A), fasten them together by two supporting screw (G).
5. Unscrew socket ring (J) from the socket, put the shade (I) onto the socket and secure them by socket ring (J).
6. Install the bulb (not included) into the socket. Use Max 60W type A bulb or Max 9W self-ballasted LED bulb.

Components List

Hardware List (omit this part if no hardware included nor needed)

Tools Needed (omit this part if no tools included nor needed)

ASSEMBLY STEPS

• Step 1
  Unscrew two supporting screw (G) from the mounting stripe (A).
  remove mounting stripe (A) from the lamp body (H),keep
  two supporting screw (G) for later use.

• Step 2
  Fasten the mounting stripe (A) to the outlet box using two.
  outlet box screws (F)

• Step 3
  Connect the black wire (B) from the body (H) to black wire from outlet box,the white wire (C) from the body (H) to white wire from outlet box using wire connector (D) and connect bare ground wire (E) from the body (H) to ground wire from outlet box using wire connector (D),must loop one turn under the head of green screw on the mounting stripe (A).

• Step 4
  Place lamp body (H) over the outlet box,align the two holes on the canopy on the lamp body(H)
  with two holes on the mounting stripe (A),fasten them together by two supporting screw (G).

• Step 5
  Unscrew socket ring (J) from the socket,put the shade (I) onto the socket and secure them by socket ring (J).

• Step 6
  Install the bulb (not included) into the socket.use Max 60W type A bulb or Max 9W self-ballasted LED bulb.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>