LANCASTER 164WAITRS1BK Table and Seating 46 Inch Black Host Station Instruction Manual

LANCASTER 164WAITRS1BK Table and Seating 46 Inch Black Host Station

Product Information

The Waitress Station is a versatile piece of furniture that can be used in restaurants, cafes, and other food service establishments. The station comes in two colors: black (item no. 164WAITRS1BK) and white (item no. 164WAITRS1WL). It consists of several boards and shelves that are assembled using cam lock screws and nuts. The station also includes two cabinet doors with predrilled holes for attaching door hinges.

PART LIST

HARDWARE LIST:

TOOLS REQUIRED:

ASSEMBLY INSTRUCTIONS

1. STEP 1.
   Screw cam lock screws (Ax28) onto left and right side boards (1) and (2) and back board (5).

2. STEP 2.
   Insert cam lock nuts (Dx28) into top ledge, top, middle, and bottom shelves (3, 4, 6, and 7). Insert cam lock screws (Ax8) into bottom shelf (7). Arrow on cam lock nut should face outer edge where screw will be inserted.

3. STEP 3.
   Lay back board (5) on ground. Add shelves (3, 4, 6 and 7), and line up cam lock (D) and cam lock screw (A). Tighten cam lock nut (D) with screwdriver once boards are in place.

4. STEP 4.
   Align left and right side boards (1) and (2) onto the corresponding sides of shelves (3, 4, 6 and 7). a. Once boards (1) and (2) are placed with cam lock screws (A) in corresponding cam lock nuts (D), tighten nuts with screw driver .

5. STEP 5.
   Screw in cam lock screws (A) to top shelf ledge (9).

6. STEP 6.
   Place top shelf ledge (9) onto the top shelf (4) of the waitress station, use screwdriver to tighten cam locks.

7. STEP 7.
   Attach 2 magnetic door catches (Ex2) to underside of middle shelf with screws (Cx4).

8. STEP 8.
   Add cam locks nuts (Dx16) to base boards (10 and 11). Add cam lock screws (Ax8) to ends of base boards (10 and 11).

9. STEP 9.
   Form a rectangle with base boards (10 and 11). Align cam lock nuts with cam lock screws and use screwdriver to tighten.

10. STEP 10.
    Use the rectangular piece made from step 9 to attach to bottom shelf (7) with shorter base board (10) parallel to the front of the waitress station.

11. STEP 11.
    Finally, place door hinges (Bx2) onto the predrilled holes in cabinet door (8×1). Use screwdriver to screw (Cx4) into the predrilled holes. Repeat for second door.

12. STEP 12.
    Turn waitress station right side up and make sure all connections are secure.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>