PHILIPS R1506 1000 Series Portable Radio User Manual
- June 4, 2024
- Philips
Table of Contents
Portable Radio
1000 Series
R1506
Safety
- Read these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way. such as a power-supply cord or plug is damaged, liquid has been spilled or objects falling into the apparatus, or the apparatus has been exposed to rain or moisture. does not operate normally, or has been dropped.
- Battery usage CAUTION – To prevent battery leakage which may result in bodily injury. property damage, or damage to the clock radio:
- Install all batteries correctly. + and – as marked on the unit.
- Remove batteries when the unit is not used for a long time.
- The battery shall not be exposed to excessive heat such as sunshine, fire or the
- This clock radio shall not be exposed to dripping or splashing.
- Do not place any sources of danger on the clock radio (e.g. liquid filled objects, lighted candles).
- Where the plug of the Direct Plug-in Adapter is used as the disconnect device. the disconnect device shall remain readily operable.
Notice
Any changes or modifications made to this device that are not expressly
approved by MMD Hong Kong Holding Limited may void the user’s authority to
operate the product. Hereby. TP Vision Europe B.V. declares that this product
is in compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU. You can find the Declaration of Conformity on
www.philips.com/support.
This product complies with the radio interference requirements of the
European Community.
This product is designed and manufactured with high-quality materials and
components. which can be recycled and reused.
This symbol means the product must not be discarded as household waste
and should be delivered to an appropriate collection facility for recycling.
Follow local rules and never dispose of the product and rechargeable batteries
with normal household waste. Correct disposal of old products and
rechargeable batteries helps prevent negative consequences for the environment
and human health.
**** This symbol means that the product contains batteries covered by
European Directive 2013/56/EU which cannot be disposed of with normal
household waste. Inform yourself about the local separate collection system
for electrical and electronic collection system for electrical and electronic
products and batteries. Follow local rules and never dispose of the product
and batteries with normal household waste. Correct disposal of old products
and batteries helps prevent negative consequences for the environment and
human health.
FCC information
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.
IC-Canada : CAN ICES-003(3)/NMB-003(B)
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation. Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
2022© MMD Hong Kong Holding Limited. All rights reserved. Specifications are
subject to change without notice.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license. This product has been manufactured by
and is sold under the responsibility of MMD Hong Kong Holding Limited or one
of its affiliates, MMD Hong Kong Holding Limited is the warrantor in relation
to this product.
TAR1506_37_QSG_V1.0
Documents / Resources
|
PHILIPS R1506 1000 Series Portable
Radio
[pdf] User Manual
R1506, 1000 Series, Portable Radio, R1506 1000 Series Portable Radio, 1000
Series Portable Radio, Radio
---|---
|
PHILIPS R1506 1000 Series Portable
Radio
[pdf] User Manual
R1506 1000 Series Portable Radio, R1506, 1000 Series Radio, Radio, R1506
Radio, Portable Radio
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>