better bathrooms BeBa 24978 900mm White Freestanding Vanity Unit with Basin User Manual

: October 30, 2023
: Better Bathrooms

Table of Contents

better bathrooms BeBa 24978 900mm White Freestanding Vanity Unit with
Product Information
Product Usage Instructions
Contents
Tools required
Installation
Maintenance
Cleaning
INSTALLATION TOOLS
PARTS LIST
DOOR HANDLE INSTALLATION
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

better bathrooms BeBa 24978 900mm White Freestanding Vanity Unit with

Basin

Product Information

The Vanity Basin is a single-person assembly product that comes with one basin. The image shown in the manual is for illustrative purposes only and may differ slightly from the actual product. The product requires professional tradespeople to install it, and the tools required for installation are silicone, drill, and spanner. Please note that the product should be checked for pipes and cables before drilling.

Product Usage Instructions

Check for pipes and cables before drilling.
Apply silicone to the bottom of the basin and place it in the desired location.
Use a spanner to tighten the nuts around the basin’s waste and overflow.
Drill holes in the wall according to the measurements provided in the manual.
Apply silicone to the back of the basin and press it against the wall, aligning it with the drilled holes.
Use screws to secure the basin to the wall.
Connect the waste and overflow to the appropriate pipes.
Test the basin for leaks and ensure proper drainage.

If you encounter any problems during installation, please contact our customer services team via your account on betterbathrooms.com or visit betterbathrooms.com/content/contact-us for assistance.

Thank you for choosing Better Bathrooms
Please read this manual before installing your product and keep for future reference

Vanity Basin

Please note:Image is for illustrative purposes only and may differ slightly to the actual product

Single-person assembly
Tools required
We always recommend using professional tradespeople to install your product

Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We’re on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
As one of the UK’s largest independent bathroom stores, we’ve received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us

Important information

Please read these instructions thoroughly and retain for future reference
Always check for pipes and cables before drilling

Tools required

Silicone,Drill ,Spanner

Installation

Check the wall for pipes and wires before drilling, drill through the back plinth into the wall in the desired location, ensuring the unit is level
Secure the unit to the wall using a suitable wall fixing for your wall type (fixings not supplied with unit) ie plug and screw for solid walls£

On receipt of the product check for damage prior to commencement of any installation Damage notified after or during installation will be deemed as installation damage

Apply a bead of silicone between the basin and the unit Place the basin/top onto the unit, again ensuring all parts are level Also apply silicone at any join between the basin and walls
It is recommended to silicone around the base of the unit, to prevent water from passing between the unit and the floor
Leave all silicone to dry for at least 24 hours before use

Maintenance

The basin and any chrome components should be cleaned using a soft damp cloth, no abrasive cleaning agents or materials should be used, as this can affect the surface finish. Use of any abrasives can invalidate your guarantee.

Cleaning

To maintain the surface finish of your product, wipe clean after every use, using a clean damp cloth, a mild detergent mixture can be used. Do not use abrasive cleaning agents or materials which can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.

INSTALLATION TOOLS

PARTS LIST

Product| Description| Qty| Description| Qty| Description| Qty| Description| Qty| Description| Qty| Description| Qty| Description| Qty
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
24975 24976

24977

|

Wall Screw

| |

Wall Plug

screw

| | Shell Door Handle| | Shell Handle

Screw

|
24978 24979

24980

|

Wall Screw

| |

Wall Plug

screw

| | Shell Door Handle| | Shell Handle

Screw

|
24981

24982

24983

|

Wall Screw

| |

Wall Plug

| |

Brass washer

| |

Plastic washer

| |

Screw Cap

| | | | |
2498424985

24986

handle

| | Round handle

screw

| | | | |
25008

25009

25010

|

Wall Screw

| |

Wall Plug

| |

Wall Bracket

| | | | | | | | |
2501125012

25013

25016

25019

25826 25827

25828 25829

25830 25831

25832 25833

|

Wall Screw

| |

Wall Plug

| |

Wall Bracket

| |

Frame Screw

|

12

| | | | | |
25841 25842

25843

|

Wall Screw

| |

Wall Plug

| |

WallBracket

| | | | | | | | |
25838

25839

25840

|

Wall Screw

| |

Wall Plug

| |

Wall Bracket

26939

26940

|

Wall Screw

| |

Wall Plug

| |

Brass Washer

| |

Plastic Washer

| |

Screw Cap

| | | | |
27465

27466

27799

INSTALLATION – Check the product for damage prior to installation
Before any drilling is carried out, please check for pipes and wires within the wall which could be damaged.

MIRROR INSTALLATION

Fitted to the rear of the unit are x 2 fixing brackets, measure the distance between the two brackets and mark this distance on the wall, ensuring this horizontally aligned, using a spirit level. We recommend a height for the brackets of 70″ (1778mm) from the floor, but this is customer choice. It is recommended to install to a solid wall, but if fitting to a stud wall, the fixings must be secured into a stud, not only into the plasterboard.

After the position of the brackets is marked, drill the holes in the wall, using an 8mm drill bit (not supplied}, to a depth of approx 40mm.

Insert the wall plugs and tap flush with the wall surface.

Hold the bracket up to the wall over the drilled holes and secure using the screws provided.

Ensure the brackets on the rear of the unit are fully tightened.
Lift the product on the wall mounted brackets to engage both sections of the brackets.

Once installed a bead of silicone can be applied around the edges of the unit if required.

CABINET INSTALLATION

Fitted to the rear of the unit are x 2 fixing brackets, measure the distance between the two brackets and mark this distance on the wall, ensuring this horizontally aligned, using a spirit level.
We recommend a height for the brackets of 27.5″ {698mm) from the floor, but this is customer choice.
It is recommended to install to a solid wall, but if fitting to a stud wall, the fixings must be secured into a stud, not only into the plasterboard.
It is also recommended to set up the unit before installing the basin not the unit, so any adjustment can be made, via the fixings on the unit.

After the position of the brackets is marked, drill the holes in the wall, using an 8mm drill bit (not supplied}, to a depth of approx 40mm.

Insert the wall plugs and tap flush with the wall surface and secure the wall brackets into place.

Check the brackets fitted to the unit are fully tightened. Lift the unit onto wall fitted brackets.

If any adjustment forward or backward/ up or down is required this is possible via the fitted adjusters on the inside of the unit.

After any adjustment of the unit has been made the basin can be fitted to the unit, by applying a bead of silicone between the unit and basin to provide a seal and fixing for the basin to the unit.
Also run a bead of silicone along the back edge of the base where it meets the wall.

DOOR HANDLE INSTALLATION

The doors which are to be fitted with handles, either the round or shell type are provided with pilot holes which should be drilled to allow fitting of the handle screw through the door and into the handle.

Drill the holes, then place the screw through the unit from inside the door, connect this to the handle and tighten

FRAMED FURNITURE ASSEMBLY

Place the frame onto the unit and screw the frame to the unit through the holes in the frame, ensuring this is aligned with the unit edge.
Ensure this is fully secured before use

WC UNIT INSTALLATION

Drill into the wall through the rear plinth of the WC unit.
Fit the wall plug
Place the screw through the washers and secure to the wall.
Fit brass screw cap to brass washer

Measure the height from the floor to height a then measure height b and allow 5mm tolerance, then measure width c and allow 5mm

Mark these dimensions on to the front panel of the unit using a pencil

Remove the front panel from the unit and cut the hole to allow the waste pipe and flush pipe to pass from the cistern

it is recommended to seal the cut edge and bottom edge of the unit, to protect against moisture ingress

CLEANING AND MAINTENANCE

Wipe the product clean and dry regularly, especially when the product is subject to steam or splashes.
Do not use harsh chemicals or materials on the product, as this will damage the product and invalidate your guarantee.
To clean and maintain the product, wipe using a clean damp cloth and wipe dry with a soft cloth.
We hope your new product goes above and beyond your expectations. However, should any problems occur, please:

log in to your account and contact our customer services team via your self-serve portal – betterbathrooms.com/CustomerAccount/Login
contact us via betterbathrooms.com/content/contact-us

For more information