tp-link H200 Tapo Wire Free Security Camera System User Guide

User Guide
Wire-Free Security Camera System

About This Guide

This guide provides a brief introduction to the Tapo Smart Hub and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.

Conventions
In this guide, the following convention is used:

More Info

• Specifications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.

Introduction

Tapo Smart Hub works as your smart home ecosystem center. It connects up to 64 smart buttons, sensors, or Sub-1G switches** + 4 cameras or video doorbells (Tapo C420, Tapo C400, Tapo D230) to build a smart ecosystem for your  home.

• Works with Tapo Smart Devices* – Connect up to 64 smart buttons, sensors, or Sub-1G switches** + 4 cameras or video doorbells (Tapo C420, Tapo C400, Tapo D230) to build a smart ecosystem for your home.
• Smart Alarm & Chime – Turn your hub into a smart alarm or chime by pairing it with Tapo cameras, video doorbells, sensors, and more. 19 built-in ringtones are also provided for your choice.
• microSD Card Slot (Up to 512 GB) †– Insert a microSD card to store recorded videos of the connected cameras and doorbells.
• Wireless/Wired Networking – Connect your Hub to your home network via wired or wireless connection.

† microSD card needs to be purchased separately.
*Tapo H200 can work with Tapo smart sensors, buttons, Sub-1G switches, cameras and video doorbells. Scan the QR code to visit the Tapo website for all supported products.
**Tapo H200 only supports Sub-1G devices working in specified frequency bands:
863.35MHz, 864.35MHz, 868.35MHz (for EU/UK) or 920.9MHz, 921.7MHz, 922.3MHz (for US/AU). Actual supported bands may vary by region/ country.

Appearance

1. SYNC
   Press to pair with the camera, or silence the hub when it rings.

2. RESET
   Press and hold for about 5 seconds until the hub LED quickly blinks red to reset the hub.

3. microSD Card Slot
   Insert a microSD card to record camera videos locally. Initialize the microSD card within the Tapo app first.
   ▲ microSD card not included.

4. Status LED
   Indicate the status of your hub.

Status LED

Set Up Your Camera

Follow the steps below to get started with your new hub.

Step 1. Connect the Hardware
Get the Tapo app from the App Store or Google Play, or by scanning the QR code below.

Step 2. Download Tapo App
Get the Tapo app from the App Store or Google Play, or by scanning the QR code below.

https://www.tapo.com/app/download-app/

Step 3. Log In
Open the app, and log in with your TP-Link ID.
If you don’t have an account, create one first.

Step 4. Set Up
Tap the button in the app and then the Tapo brand. Select Hubs and then your model.
Follow app instructions to set up your hub.

Install a microSD

Manage Your Hub

After you successfully set up the hub, you will see your device listed on the home page. You can view and manage your hub from anywhere at any time with the Tapo app.

Status Page

Settings Page
On Status page, tap to enter the settings page. You can change your device name and location, set network connection (connect your hub to Wi- Fi), select ringtone, turn on/off status LED, set auto reboot time, etc.

Authentication

FCC compliance information statement

Product Name: Tapo Smart Hub
Model Number: Tapo H200

FCC compliance information statement
Product Name: DC ADAPTER
Model Number: DC-005
Responsible Party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 926181
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the  equipment is properly maintained and operated.
Issue Date: 2023-12-26

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

OPERATING FREQUENCY (the maximum transmitted power)
2412MHz—2472MHz (20dBm)

EU Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tapo.com/en/support/ce/
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.

UK Declaration of Conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/ 
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Do not use damaged charger or USB cable to charge the device. Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don’t hesitate to contact us.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequality shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the product from the power outlet.
• Product should be kept away from heat sources such as radiators, cookers etc. – it should not be placed in places where the temperature is less than -20 degrees or greater than 45 degrees.
• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label
Symbols may vary from products

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled  or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a  new electrical or electronic equipment.
| Caution, avoid listening at high volume levels for long periods
| Disconnection, all power plugs
| Switch of mini-gap construction
| Switch of micro-gap construction (for US version)
Switch of micro-gap / micro-disconnection construction (for other versions except US)
| Switch without contact gap (Semiconductor switching device)

References

• Link: Simple, secure one-click payments
• WiFi Networking Equipment for Home & Business | TP-Link
• Tapo | Smart Devices for Smart Living
• Regulatory Compliance | Tapo
• UKCA | Tapo

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>