INFURTURE H1 PRO Hybrid Active Noise Cancelling Headphones User Manual

October 30, 2023
INFURTURE

INFURTURE H1 PRO Hybrid Active Noise Cancelling Headphones

Product Information

Wireless Headphone

The Wireless Headphone is a device that allows you to listen to audio wirelessly without the need for cables. The model number of the device is TMROYN. The device has noise-cancelling technology (ANC) and aptX codec support, which enhances the audio quality of your music.

Product Usage Instructions

  1. Charge the device fully before use.
  2. Turn on the headphone by pressing and holding the power button (Button 1).
  3. Pair your device with the headphone by following these steps:
    • Open your device’s Bluetooth settings.
    • Select “H1PRO” from the list of available devices to connect.
  4. To turn on the ANC feature, press and hold Button 5. The device will prompt you with a voice message saying “ANC ON.”
  5. To turn on the aptX codec support, press and hold Button 3. The device will prompt you with a voice message saying “APT ON.”
  6. Adjust the volume by pressing Buttons 7 and 8 to increase or decrease the volume respectively.
  7. To skip to the next track, press Button 4.
  8. To play or pause your music, press Button 6.

Packing list

Product Overview

  1. ANC/Transparency Switch
  2. EQ Switch
  3. LED Indicator Light
  4. USB-C Charge Interface
  5. Previous track/Volume up
  6. Power Switch/Play/Pause/Answer/End a call
  7. Next track/Volume down
  8. AUX Interface

Charging

  • Fully dry off the USB-C port before charging.
  • Use a certified USB-C charging cable and charger to prevent any damage.
  • Do not power on your headphone while charging.

Powering on/off

  • Power on: Press and hold power button for 2 seconds you will hear the voice “Power on”
  • Power off: Pressand hold power button for 5 seconds you will hear the voice “Power off”

Bluetooth pairing

  • Step 1: When powered off, press and hold the power button for 5 seconds until the LED flashing red/blue to enter the Bluetooth pairing mode.

  • Step 2: Select”H1 PRO”on your device’s Bluetooth list to connect.

  • Each time you power on your headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth range.

Pairing with another device

Your headphone can be connected to two devices at a time.

Step 1

Step 2

Step 3

Step 4

  • Your headphone can only play music on one mobile device at a time.
  • To play from another connected device, pause the currently active device first.

Active Noise Cancellation

  • Active Noise Cancellation/APT Push the ANC button to turn on Active Noise Cancellation/APT (Transparency)
  • ANC: Blocks most low frequency noise (For example, the engine sounds of airplanes and cars, and a few background sounds of offices)
  • APT: Allows you to hear the sounds around you.

Modes

Aux mode

Enjoy music on other devices by plugging in a 3.5mm audio cable.

Caution

  1. Using a 3.5mm audio cable will automatically turn off Bluetooth
  2. ANC function can not be used normally

EQ Mode

Push the EQ button to turn on

  1. When you hear once heavy click sound representative to turn on Bass mode
  2. When you hear twice heavy click sound representative to turn on Treble Booster mode
  3. When you hear once light click sound representative to turn on Basic mode

Calling mode

  1. Siri and Other voice assistants —Double Click
  2. Answer/Hang up a call — Short press the power button once
  3. Reject a Call: Long press the power button 2s

Reset

If you experience any connectivity issues or functional issues, you may need to reset the headphone.

  • Step 1: Keep the headset turned on
  • Step 2: Long press the power button + volume up button for 5 seconds, Purple light flashes twice
  • Step 3: The headset is turned off and reset
  • Step 4: Press and hold the power button for 5 seconds, the red and blue lights flash alternately to enter pairing mode

Warranty Regulations

Start with your purchase of our products, we promise that the headphone has a one-year warranty service. Whether you have any questions about the product or any problems with the product, we will try our best to provide the solution for you. Please feel free to contact us and we will reply within 24 hours!

The following two ways:

  1. Customer Service Email: infurture.customer.service@gmail.com
  2. Amazon Official Mail..

Fcc Statement

IC Caution

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals