INFURTURE H1 Active Noise Cancelling Headphones User Manual
- June 9, 2024
- INFURTURE
Table of Contents
INFURTURE H1 Active Noise Cancelling Headphones
Packing list
Product overview
- ANC Switch
- Previous track/Volume up
- Next track/Volume down
- Power Switch/Play/Pause/Answer/End a call
- LED Indicator Light
- AUX Interface
- USB-C Charge Interface
Charging
- Fully dry off the USB-C port before charging.
- Use a certified USB-C charging cable and charger to prevent any damage.
- Do not power on your headphone while charging.
| Voice reminder for low power| Low power
---|---|---
| Steady red| Being charged
| Steady green| Fully charged
Powering on/off
Power on: Press and hold power button for 2 seconds you will hear the
voice”Power on”
Power off: Pressand hold power button for 5 seconds you will hear the
voice “Power off”
| Steady bule（for 0.5 second）| Power on
---|---|---
| Steady red（for 0.5 second）| Power off
Bluetooth pairing
- Step1 – When powered off, press and hold the power button for 5 seconds until the LED flashing red/blue to enter the Bluetooth pairing mode.
- Step2 – Select “H1” on your device’s Bluetooth list to connect
- Each time you power on your headphone, it will automatically connect to your last successfully connected device if available within the Bluetooth range.
| Flashing blue/red| Bluetooth pairing
---|---|---
| Steady blue (for 2 seconds)| Bluetooth connected
Pairing with another device
Your headphone can be connected to two devices at a time.
Step1:
Step2：
Step3：
Step4：
Your headphone can only play music on one mobile device at a time. To play from another connected device, pause the currently active device first.
Active Noise Cancellation
Push the ANC button to the other side to turn on Active Noise
Cancellation
ANC: Blocks most low frequency noise（For example, the engine sounds of airplanes and cars, and a few background sounds of offices）
Aux mode
Enjoy music on other devices by plugging in a 3.5mm audio cable
caution:
- Using a 3.5mm audio cable will automatically turn off Bluetooth
- Only the ANC function can be used normally
Reset
If you experience any connectivity issues or functional issues, you may need to reset the headphone.
- Step1-Keep the headset turned on
- Step2-Long press the power button + volume up button for 5 seconds, Purple light flashes twice
- Step3-The headset is turned off and reset
- Step4-Press and hold the power button for 5 seconds, the red and blue lights flash alternately to enter pairing mode
Calling mode
- Siri and Other voice assistants ———— Double Click
- Answer/Hang up a call ————- Short press the power button once
- Reject a Call ———– Long press the power button 2s
Warranty regulations
Start with your purchase of our products, we promise that the headphone has a
one-year warranty service. Whether you have any questions about the product or
any problems with the product, we will try our best to provide the solution
for you.
Please feel free to contact us and we will reply within 24 hours！
The following two ways：
- Customer Service Email: [email protected]
- Amazon Official Mail