EC-LINK EC-RF615 Ultra-thin Integrated Module Owner’s Manual

October 30, 2023
EC-LINK

EC-LINK EC-RF615 Ultra-thin Integrated Module

EC-LINK-EC-RF615-Ultra-thin-Integrated-Module-PRODUCT

Product Information

  • The EC-RF615 is a UHF RFID antenna integrated card reading module manufactured by EC-LINK Automation (Shenzhen) Co. Ltd.
  • It is an ultra-thin module that comes with a 915Mhz card reading module and a ceramic antenna.
  • The module uses a USB connector for power supply and data transmission.
  • It is suitable for installation in size-limited applications.
  • The product supports EPC C1/Gen2, ISO/IEC 18000-6C agreement, and has an output power of 5~20dBm.
  • The working voltage ranges from 3.3V to 5.3V, and the maximum operating current is 328500.
  • The module can be used for material/workpiece identification on production assembly lines, automatic identification of tool configuration, conveying line tray identification in logistics, material management, fixture/workpiece identification on mobile platforms, and identification of production materials in machinery and equipment.

Product Usage Instructions

  • Connect the EC-RF615 module to a USB port using a USB cable to supply power and transmit data.
  • Ensure that the USB cable is connected to the correct pins as per the USB interface definition provided in the manual (Pin 1: VCC, Pin 2: DATA-, Pin 3: DATA+, Pin 4: GND).
  • Maintain a minimum distance of 20cm between the device and your body while operating the module on a mobile device.
  • Ensure that any changes or modifications to the module are approved by the party responsible for compliance to avoid voiding the user’s authority to operate the equipment.

Caution

  • The EC-RF615 module complies with part 15 of the FCC Rules and should not cause harmful interference. It must also accept any interference received, including interference that may cause undesired operation.
  • Installation and operation of the module must be carried out with a minimum distance of 20cm between the radiator and the body to comply with FCC radiation exposure limits set forth for an uncontrolled environment.
  • The module is CAN ICES-003(B) / NMB-003(B) compliant.

EC-RF615 is the EC-LINK company that launched a UHF RFID antenna integrated card reading module, integrated 915Mhz card reading module and ceramic antenna, the product uses the industry general USB connector, a cable to achieve power supply and data transmission, and can be easily installed in size-limited applications.
Application field: widely used in factory automation and logistics automation. Material / workpiece identification on a production assembly line and automatic identification of tool configuration; conveying line tray identification in logistics industry, material management, fixture/workpiece identification on mobile platform; identification of production materials in machinery and equipment.
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen City http://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833
E-mail:sales@eclinksz.com

Order information

  • product   model: EC-RF615
  • Product material number:74191102000
  • frequency   range:860 – 960 MHz
  • Specification parameters:
  • center frequency: 915MHZ
  • Working frequency band: 840MHZ-960MHZ
  • Support Agreement: EPC C1/Gen2, ISO/IEC 18000-6C
  • output power: 5~20dBm
  • working voltage: 3.3V-5.3V
  • maximum operating current: <200mA
  • working temperature: -20°C~+60°C
  • Storage temperature: -25°C~+85°C
  • Protection level: IP65
  • MTBF: >328500
  • Condition: EN 61709 at+55°C

USB Interface definition

4PIN   USB Interface definition

Pin| Definition| Description
1| VCC| Power DC5V
2| DATA-| Data line negative
3| DATA+| Data line positive
4| GND| Power ground

Package size: 86mmX60mmX20mm

caution

  • This device must be professionally installed

  • This equipment does not allow any antenna to work with the transmitter; the permitted antenna type must be specified external antennas, for example (antenna name:Planar RFID antenna,Model:Ha-VIS RF-ANT-LR20)
    device is generally for industrial/commercial use. it must be sold to authorized dealers or installers only,cannot be sold via retail to the general public or by mail order.

  • The equipment is an RFID technology RF product, and must be installed by electrical and electronic professionals with a professional certificate

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

IC Caution.
CAN ICES-003(B) / NMB-003(B)
RSS-Gen Issue 3 December 2010″&”CNR-Gen 3e éditionDécembre 2010:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
ADD:Room 2206, Block B, Shixia Xintian Century Business Center, Futian District, Shenzhen Cityhttp://www.eclinksz.com Tel:0086-755-8368 1813 Fax:0086-755-8323 5833
E-mail:sales@eclinksz.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals