UVision X2 Full HD Projector User Manual
- October 30, 2023
- Uvision
Table of Contents
UVision X2 Full HD Projector
PRODUCT INFORMATION
The UVISION Projector X2 comes with the following items in the package:
- Projector x 1
- Remote Control x 1
- Power Cord x 1
- HDMI Cable x 1
- Projector Bag x 1
Button note
The Power Button is used to turn on and off the projector:
- Power on: Single Click
- Power off: Double click
- LED Static: power off is red
- LED Static: power on is blue
Product I/O note
The projector has the following input/output ports:
- HDMI x 1
- USB x 2
- AV x 1
- AUX x 1
Product Remote Control note
The projector comes with a remote control that can be used to control the projector.
Using Instruction
- Plug-in the power.
- Power on:
- Use Remote Control or press power key (Single Click).
- Power off:
- Use Remote Control or press power key (Double Click).
- Default HOME screen.
- Adjust Projection Image Focus:
- Rotate the focus ring to sharpen the image focus until the blurred image becomes clear.
- Source choosing:
- Select source choose which I/O.
- HDMI:
- Select HDMI, Wait signal input.
- Signal input:
- Same screen Phone mirroring has IOS Display and Android Display.
- Press the remote control ok key can change to another IOS Display.
- Open phone wifi, search AP name (LOLLIPOP-XXXXXX).
- Select screen mirror, find the name of LOLLIPOP- XXXXXX, and connect it.
- Android Display:
- Find the function of Multi-screen /Wireless Display /Smart View or Miracast in the android phone , find the name of LOLLIPOP- XXXXXX, and connect it.
With these instructions, you should be able to use your UVISION Projector X2 with ease.
Include
- Projector x 1
- Remote Control x 1
- Power Cord x 1
- HDMI Cable x 1
- Projector Bag x 1
Button note
-
Power Button
-
Power on: Single Click, Power off: Double click
-
LED Static : power off is red
-
LED Static: power on is blue
1/0 note
- HDMI x 1
- USB x 2
- AV × 1
- AUX × 1
Remote Control note
How to use
-
Plug-in the power
-
Power on
Use Remote Control or press power key(Single Click) -
Power off
Use Remote Control or press power key (Double Click)
- Default HOME screen
- adjust Projection Image Focus
Rotate the focus ring to sharpen tthe image focus until the blurred image becomes
-
Source choosing
Select “source” choose which I/O -
HDMI
-
Select HDMI, Wait signal input
-
Signal input
-
-
Same screen
- Phone mirroring has IOS Display and Android Display
* Press the remote control ok key can change to another-
IOS Display
-
Open phone WIFI, search AP name (LOLLIPOPP‐XXXXXX)
-
Select screen mirror, find the name of LOLLIPPOP‐ XXXXXXX, and connect it.
-
- Android Display
Find the function of Multi‐screen /Wireless Display /Smart View or Miracast in the android phone , find the name of LOLLIPOP‐XXXXXX, and connect it.
RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
Information to user.
- The user manual or instruction manual for an intentional or unintentional radiator shall caution the user that
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>