P S MWTK76 30 Inch One Piece Stainless Steel Microwave Trim Kit Owner’s Manual
- October 30, 2023
- P S
Table of Contents
P S MWTK76 30 Inch One Piece Stainless Steel Microwave Trim Kit
Product Information
MWTK76 – 30 One Piece Stainless Steel Microwave Trim Kit
The MWTK76 is a trim kit designed to create a finished look for microwaves that are placed within cabinet openings. It is easy to install and features a smooth clean finish that instantly gives your kitchen a modern makeover. The trim kit is compatible with under-counter microwaves.
Features
- Stainless Steel Material
- One Piece Design
- Easy to Install
- Smooth Clean Finish
- Compatible with Under-Counter Microwaves
Specifications
- VOID CUT-OUT
Installation Details
- Unscrew the 4 screws holding the 2 pieces of wood in place, and retain the screws.
- Screw the 2 pieces of wood onto the base of the cabinet. The wooden strips should touch the inside of the front of the MWTK-76, and be positioned with the centre of the wooden strips (1817/64= 46.4cm) apart.
- Being careful not to scratch the microwave door, lift the microwave onto the wooden strips, and move it back about 2 inches.
- Place the MWTK-76 into position. Use the 4 screws and screw them through the flanges into the side gables.
- Pull the microwave forward, and align the front of the microwave with the front of the MWTK-76.
- To stop the microwave from sliding backwards whilst opening it, it might be necessary to attach a piece of wood behind the feet of the microwave, on the wooden supports.
- Air must be able to flow from the microwave upwards and into the room, or roof space. Failure to comply will void the manufacturer’s warranty on the microwave oven.
Warranty Information
Porter & Charles Appliances are designed and manufactured to the highest
standards. Each appliance is covered by comprehensive 2-year parts and labour
warranty. Refer to product warranty policy for complete terms and conditions.
For Parts & Service:
Euro-Parts & Service Porter & Charles appliances are imported and
distributed in North America by Euro-Line Appliances Inc. For more
information, please visit one of our showrooms or
www.ela.ca / www.elawest.ca
30” One Piece Stainless Steel Microwave Trim Kit
Create a finished look for microwaves that are placed within cabinet openings.
This easy-to-install trim kit features a smooth clean finish to instantly give
your kitchen a modern makeover
Features
- Designed to fit a 30” (76cm) oven cabinet
- Creates integrated look for your microwave
- Recommended use with Panasonic 1.6 cu. ft. microwave -Model# NNSD786S or equivalent.
- Works well in an appliance tower over a built-in oven, or under-counter.
Compatible With
- Panasonic NNSD786 Microwave
- Panasonic NNSD797 Microwave
Specifications
Install Details
VOID CUT-OUT
- Unscrew the 4 screws holding the 2 pieces of wood in place, and retain the screws.
- Screw the 2 pieces of wood onto the base of the cabinet. The wooden strips should touch the inside of the front of the MWTK-76, and be positioned with the centre of the wooden strips (1817/64”= 46.4cm) apart.
- Being careful not to scratch the microwave door, lift the microwave onto the wooden strips, and move it back about 2 inches.
- Place the MWTK-76 into position. Use the 4 screws and screw them through the flanges into the side gables.
- Pull the microwave forward, and align the front of the microwave with the front of the MWTK-76.
- To stop the microwave from sliding backwards whilst opening it, it might be necessary to attach a piece of wood behind the feet of the microwave, on the wooden supports.
- Air must be able to flow from the microwave upwards and into the room, or roof space. Failure to comply will void the manufacturer’s warranty on the microwave oven.
Other Product Downloads Available at porterandcharles.ca
WARRANTY INFORMATION
Porter & Charles Appliances are designed and manufactured to the highest
standards.
Each appliance is covered by comprehensive 2-year parts and labour warranty.
Refer to product warranty policy for complete terms and conditions.
FOR PARTS & SERVICE
Euro-Parts & Service
39822 Belgrave Road, Belgrave, ON. N0G 1E0 1 866 722 2262
www.euro-parts.ca • parts@euro-
parts.ca • service@euro-parts.ca
Porter & Charles appliances are imported and distributed in North America by
Euro-Line Appliances Inc. For more information, please visit one of our
showrooms or www.ela.ca /
www.elawest.ca
EURO-LINE APPLIANCES INC.
871 Cranberry Court, Oakville, ON
L6L 6J7 Canada
905 829 3980
1 800 421 6332
info@ela.ca
EURO-LINE APPLIANCES INC.
101-1014 Homer Street, Vancouver, BC
V6B 2W9, Canada
604 235 3980
1 855 ELA WEST (352 9378)
info@elawest.ca
Notes: Porter & Charles reserves the absolute and unrestricted right to change product materials and specifications, at any time, without notice.
Warranties: Please see the Use & Care manual or Porter & Charles website
for a statement of limited warranty. For more information on our entire line
of products, go to www.porterandcharles.ca
or call 905.829.3980
© Porter & Charles. All rights reserved.
References
- Tiny
- P&C Home Page - Porter & Charles
- Euro-Line Appliances - Canada's Supplier of European Home Appliances
- Euro-Line Appliances - Canada's Supplier of European Home Appliances
- Euro-Parts Canada | After Sales Service for Residential Appliance Brands
- P&C Home Page - Porter & Charles